Alfa Network AWAP02O-1W User manual

AWAP02O-1W
802.11g/b Wireless LAN High-Power
Outdoor Access Point With POE
IEEE 802.11g/b Wireless LAN Access Point
Acting as a bridge between the wired Ethernet and the 2.4GHz IEEE 802.11g/b wireless LAN,
this wireless LAN access point can let your wireless LAN client stations access both the wired
and the wireless network nodes.
WDS Bridge Mode (Repeater Mode)
The WDS (Wireless Distributed System) function lets this access point act as an wireless LAN
access point and repeater at the same time. Users can use this feature to build up a large
wireless network in a large space like airports, hotels and schools …etc. This feature is also
useful when users want to bridge networks between buildings where it is impossible to deploy
network cable connections between these buildings.
Station Mode (AP Client Mode)
By setting this access point into station mode and connecting to a network device’s Ethernet
port, it can let a network device that originally only supports wired Ethernet access the wireless
LAN easily without changing any configuration.
Robust Wireless LAN Security
Except for the basic security control by using ESSID and 64/128 bit key length WEP
encryption, this access point also supports the advanced security features, like MAC access
control and hide ESSID. It provides a total solution for you to build up a secure wireless LAN
network environment that can prevent from all kinds of hacker intrusion.
Web Configuration
You can configure this access point through the friendly Web user interface with a browser.

FEATURES
zSupports WPA / WPA2 security enhanced function
zSupports WDS(Wireless Distributed System) bridge mode
zProvides station mode to act as a wireless LAN client station
zSupports roaming link integrity
zSupports authentication for wireless connectivity based on ESSID
zProvides 64/128 bit key length WEP data encryption
zProvides MAC access control , DHCP server
zSupports Web-based configuration
zSupport WDS Bridge Mode (Repeater Mode) , Station Mode (AP Client Mode)
zHigh data rate up to 54Mbps network speed
zHigh Output power1W
zSupport POE
SPECIFICATION
Standard 802.11b/g(Wireless), 802.3(10BaseT), 802.3u(100BaseT)
Data Transfer Rate 54Mbps(Wireless), 100Mbps(Ethernet)
Modulation Method CCK (802.11b), OFDM (802.11g)
Frequency Band 2.4GHz – 2.4835GHz ISM Band, DSSS
Output Power 27dBm@OFDM , 30dBm@CCK
Available transmit
power
(Typical)
30dBm @1, 2, 5.5 and 11Mbps
29dBm@6, 9, 12and 18Mbps
28dBm@24, 36Mbps
27dBm@48, 54Mbps
Receiver Sensitivity 802.11b -82 dBm@8%, 802.11g -66 dBm@10%
Interface
One RJ-45 LAN with PoE
N-type connector for external high gain Antenna
Antenna External Antenna
Security 64 bit/128 bit WEP, WPA, WPA2,
Power 48V POE Adaptor
Channel USA 11, Europe 13, Japan 14
Operating Temperature 0 – 40°C ambient temperature
Storage Temperature -20 ~ 70°C ambient temperature
Humidity 10-90% maximum (non-condensing)
Package 11g outdoor AP
One CD-ROM User Guide
One POE Adapter
One set Mounting kit