Alfa Network AWAP601HW User manual

AWAP601HW
802.11g/b Wireless LAN PoE Access Point
1W High-Power
IEEE 802.11g/b Wireless LAN Access Point
Acting as a bridge between the wired Ethernet and the 2.4GHz IEEE 802.11g/b wireless LAN,
this wireless LAN access point can let your wireless LAN client stations access both the wired
and the wireless network nodes.
WDS Bridge Mode (Repeater Mode)
The WDS (Wireless Distributed System) function lets this access point act as an wireless LAN
access point and repeater at the same time. Users can use this feature to build up a large
wireless network in a large space like airports, hotels and schools …etc. This feature is also
useful when users want to bridge networks between buildings where it is impossible to deploy
network cable connections between these buildings.
Station Mode (AP Client Mode)
By setting this access point into station mode and connecting to a network device’s Ethernet
port, it can let a network device that originally only supports wired Ethernet access the wireless
LAN easily without changing any configuration.
Robust Wireless LAN Security
Except for the basic security control by using ESSID and 64/128 bit key length WEP
encryption, this access point also supports the advanced security features, like MAC access
control and hide ESSID. It provides a total solution for you to build up a secure wireless LAN
network environment that can prevent from all kinds of hacker intrusion.
RP-SMA Detachable Antenna
This access point provides a standard RP-SMA antenna connector that can let you apply all
kinds of high gain antennas. This can help you enlarge your wireless LAN coverage.
Web Configuration
You can configure this access point through the friendly Web user interface with a browser.

FEATURES
zHigh data rate up to 54Mbps network speed
zHigh Output power1W
zAuto rate fallback in case of obstacles or interferences
zSupports WPA / WPA2 security enhanced function
zSupports WDS(Wireless Distributed System) bridge mode
zProvides station mode to act as a wireless LAN client station
zSupports roaming link integrity
zSupports authentication for wireless connectivity based on ESSID
zProvides 64/128 bit key length WEP data encryption
zSupport 18V PoE
SPECIFICATION
Standard 802.11b/g(Wireless), 802.3(10BaseT), 802.3u(100BaseT)
Data Transfer Rate 54Mbps(Wireless), 100Mbps(Ethernet)
Modulation Method CCK (802.11b), OFDM (802.11g)
Frequency Band 2.4GHz – 2.497GHz ISM Band, DSSS
Output Power 27dBm@OFDM , 30dBm@CCK
Available transmit
power
(Typical)
30dBm @1, 2, 5.5 and 11Mbps
29dBm@6, 9, 12and 18Mbps
28dBm@24, 36Mbps
27dBm@48, 54Mbps
Receiver Sensitivity 802.11b -82 dBm@8%, 802.11g -66 dBm@10%
Antenna 2dBi RP-SMA Detachable Antenna
Security 64 bit/128 bit WEP, WPA, WPA2,
Power Input：100~240V Output：18V 1.0A
Flash 2MB, SDRAM : 8MB
Channel USA 11, Europe 13, Japan 14
Sensitivity for 802.11b
1, 2 Mbps (BPSK, QPSK): - 90 dBm / 5.5 Mbps (CCK): - 86 dBm
11 Mbps (CCK): -82 dBm / (typically @PER < 8% packet size 1024 and
@25ºC + 5ºC)
Sensitivity for 802.11g
54Mpbs (64QAM): -66dbm ,48Mbps (64QAM): -71dbm
36Mpbs (16QAM): -79dbm ,24Mbps (16QAM): -80dbm
18Mbps (QPSK): -81dbm , 12Mpbs (QPSK): -82dbm
9Mbps(BPSK): -85dbm , 6Mbps (BPSK): -87dbm
(typically @PER < 10% packet size 1024 and @25ºC + 5ºC)
Humidity 10-90% maximum (non-condensing)
Dimension 135x93x30 mm (LxWxH)