3
Minigraf 44
1. GENERAL INFORMATION
1.1 PRODUCER
The firm Alfamacchine can boast more than 10 years of
experience in the construction of Woodworking Machines.
It is the acquired technological know-how, developed during
years of researches in strict touch with manufacturing
department and international commercialization the best
warranty that Alfamacchine can grant to its customers.
TEL +39-0543-482711 FAX +39-0543-480770
1.2 ASSISTANCE CENTERS
Alfamacchine is represented both in Italy and Europe by a
numerous and prepared sales organization. Contact directly
our firm to the over impressed numbers to have the
indications concerning the local Assistance organization.
For every need regarding Use, Maintenance or Request of
Spare Parts, the Customer is pleased to address to the
authorized service centers or directly to Alfamacchine,
specifying the machine identification data impressed on the
plate.
1.3 CERTIFICATION
The machine is produced in conformity to the pertinent
European Community Norms in force at the moment of its
introduction on the market.
1.4 WARRANTY
TheAlfamacchine’s products are constructed to have a long
duration and are tested one by one.
If, in spite of this, would occur any damages or
malfunctioning, the replacement of defective parts is
warranted (counting from the date written on the delivery
bill) for a period of:
- 24 months for mechanical components
- 12 months for pneumatic part
Thedriverbladeis tested for about1.000.000 workingcycles.
TheWarranty does not include the sending of technical staff.
The repair interventions will be effected at Alfamacchine’s
and the freight of shipment will be entirely charged to the
Customer.
The warranty does not cover the damages caused by a not
appropriate use of the machine or not corresponding to the
instructions described in this handbook.
The warranty decays in case of unauthorized modifications
or because of accidental damages or tampering effected by
unqualified personnel.
The warranty decays also in case of using ofV-nails different
from original Alfamacchine’s ones.
To take advantage of warranty services is necessary, at the
moment of goods reception, to fill up completely the form
attached in 3 copies, and send it back as soon as possible to
Alfamacchine.
The remaining copies will be attached to the machine
documentation.
Thewarranty willbe validaftertheAlfamacchine’srecording.
1.5 PRE-ARRANGEMENTS CHARGED TO
THE CUSTOMER
It is a customer duty, on times agreed with the producer, to
execute what is indicated in our documentation.
Are normally charged to the customer:
•Premises predisposition, included building works and/
or canalization eventually requested
•Pneumatic supply of compressed air (see the paragraph
4.5)
1.6 HANDBOOK STRUCTURE
Thecustomer mustpayanextremeattention to the indications
reported on this handbook, because the proper Pre-
Arrangement,Installation and Useof the Machine,constitute
the basis of a correct customer-manufacturer relationship.
1.6.1 Object and contents
This handbook aim is to provide to the customer all
necessaries information so that, besides the proper use of
themachine, He wouldbe ableto run it incomplete autonomy
and safety. The handbook contains information concerning
the technical aspects, machine working and standstill,
maintenance, spare parts and safety. Before making any
operation on the machine, the qualified technicians and
operators must read carefully this handbook instructions. In
caseof doubt about correctinterpretation ofa.m. instructions,
ask to Alfamacchine the explanations requested.
1.6.2 Utilizers
This handbook is made both for operators and technicians
authorized to the machine maintenance.
The operators can not execute operations reserved to the
maintainers or to the qualified technicians.
The producer does not answer of damages derived from not-
observance of this prohibition
1.6.3 Preservation
The instruction handbook must be kept very closed to the
machine, into a special container protected from liquids and
whatever could compromise its legibility
