Allen-Bradley ControlLogix 1756-CP3 User manual

Packing Data PK
Publication 1756-5.46 – May 1997


(Catalog Number 1756-CP3)
Contents
Use this document to install the 1756-CP3 cable. This cable connects
the Logix 5550 or SLC family controllers to your DTE device.
Cable Wiring Diagram
1
3
2
6
5
4
8
7
9
1
2
3
4
5
6
7
8
9
CD
RXD
TXD
DTR
Common
DSR
RTS
CTS
RI
CD
TXD
RXD
DSR
Common
DTR
CTS
RTS
RI
Internal
Jumper
Controller
(90û Female 9–pin
D–shell Connector)
Computer
(Straight Female 9–pin
D–shell Connector)
Cable Length
= 3 meters (118 in.)
Right-angle connector end of the cable Straight connector end of the cable
Installation Instructions

ControlLogix Programmer Cable2
Publication 1756-5.46 – May 1997
Install the Cable
1. Connect the right-angle connector end of the cable to your
controller at the communications port.
Communications
Port
2. Connect the straight connector end of the cable to your DTE device.

ControlLogix Programmer Cable 3
Publication 1756-5.46 – May 1997

ControlLogix Programmer Cable4
Publication 1756-5.46 – May 1997
Publication 1756-5.46 – May 1997 PN 955129-39
Copyright 1997 Allen-Bradley Company , Inc. Printed in USA
Worldwiderepresentation.
Allen-Bradley Headquarters, 1201 South Second Street, Milwaukee, WI 53204 USA, T el: (1) 414 382-2000
Fax: [phone]