Allen-Bradley 1495-N85 User manual

Installation Instructions
WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from
contaminants.
Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of
practice. In case of malfunction or damage, no attempts at repair should be made.
Auxiliary Installation
Removal
Installation
1494V-M70
For use with:
140G-G / 140MG-G
140G-I / 140MG-I
1494V-M70
For use with:
140G-H / 140MG-H
140G-J / 140MG-J
Optional
Click Click
12 - 16 lb-in
12 - 16 lb-in
Bend
Bend
Bend
Bend
1
1
234
5
5
6
5
10
6
11
12
Auxiliary Contact Kit for Bulletin 1494V Circuit Breaker Operating Mechanism
For use with 140G-G, 140MG-G, 140G-H, 140-MG-H, 140G-I, 140MG-I, 140G-J, 140MG-J, 140G-K, 140MG-K,
140G-M, 140MG-M, 140G-N, 140MG-N
(Cat 1495-N85; 1495-N86)
4
9
2
7
3
8

PN-221394
DIR 10000807264 (Version 01)
Copyright © 2014 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Publication 1495-IN009B-EN-P - January 2014
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Auxiliary Installation (Cont’d)
1494V-M71
For use with:
140G-K / 140MG-K
1494V-M72
For use with:
140G-N / 140MG-N
1494V-M72
For use with:
140G-M / 140MG-M
12 - 16 lb-in
12 - 16 lb-in
12 - 16 lb-in
40 - 60 lb-in
40 - 60 lb-in
23 - 37 lb-in
1
4
5
6
7
2
3