•To remove the jogger kit, first take off the brake lever by loosening and removing
the hand knob (#16) on the lever bracket (#17).
•Then release the brake, remove the front wheel,
•Remove the two screws from one side of the cross support tube.(#7)
•Finally, remove the QR pins(#18) from the aluminum frame brackets (#19),
depress the spring pin (#20), and pull out the arms.
,
Maintenance
We recommend that you have an experienced mechanic perform the following checks
and lubricate required areas once a year.
•All pivot points - Lubricate and check fasteners, such as nuts and bolts.
•Wheel Axles - Lubricate, adjust and check for signs of wear
•Folding mechanism - Lubricate, adjust and check for signs of wear
•Handbrake - Lubricate pivot point, adjust and check for signs of wear.
•Tires - Check tires regularly for proper inflation. Inflate to 20-30 PSI range.
Lower pressures give a softer ride. Always use a hand or foot pump to inflate
tires.
•To maintain the safety and performance of your jogger kit, use only original
equipment replacement parts available from the service center or your retailer.
Use of non-approved replacement parts and accessories will void
manufacturer’s warranty.
WARRANTY INFORMATION:
ALLEN SPORTS USA
If your product requires warranty service, do not return it to retail location where it was purchased. Contact:
Please note that all returns and exchanges are subject to the return policy of the retailer
where the product was originally purchased
R. A. ALLEN CO., INC. - 505 BEACHLAND BLVD. - STE. 5 - VERO BEACH, FL 32963
