Allied Data Technologies CopperJet 800 User manual

Installation manual 800 USB

Manual 800 USB Rev1.0
2
Contents
General Information 3
Packaging contents 4
How to install the ADSL USB modem 5
ADSL USB modem driver installation under Windows 98 SE 6
ADSL USB modem driver installation under Windows ME 9
ADSL USB modem driver installation under Windows 2000 11
ADSL USB modem driver installation under Windows XP 15
ADSL USB Modem Configuration Wizar d 16
Configuring the ADSL USB modem by option 1 17
Configuring the ADSL USB modem by option 2 21
Configuring the ADSL USB modem by option 3 24
Troubleshooting 30
Declaration of Conformity 33

Manual 800 USB Rev1.0
3
General Information
Minimum System Requirements
Windows 98, 98SE, ME, 2000, or XP
Pentium 2 466 MHz
32 MB RAM
USB 1.1 compatible interface
Power consumption
USB 1.1 specification
Certification/Homologation
CE, EN60950, FCC, UL 1950
ADSL Complaince
ANSI T1.413 i2
G.992.1 annex A
G.992.2 (G.Lite)
Multimode
General Specifications
USB Buspowered
DHCP Client
PPP ov er ATM (RFC 2364)
PPPoE relay
Transparent Bridging (RFC 1483)

Manual 800 USB Rev1.0
4
Packaging contents
1. ADSL USB modem
2. RJ11 cable
3. USB cable
4. Driver CD

Manual 800 USB Rev1.0
5
How to install the ADSL USB modem.
1. Connect the USB cable to your computer.
2. Connect the other side of the USB cable to your ADSL USB modem.
3. Connect the RJ11 cable to your ADSL USB modem (the ADSL port on the
back of the ADSL USB modem).
4. Connect the other side of the RJ11 cable into the phone outlet.
See pictur e below for the setup.
Service Provider
Network (Telco)
RJ11 Cable USB Cable
Computer

Manual 800 USB Rev1.0
6
ADSL USB modem driver installation under Windows 98 SE.
1. Place the CD - ROM in the CD - ROM drive.
After you plugged in the USB cable in the ADSL USB modem and your computer,
Windows automatical ly detects new hardware.
2. Click on ” Next ”.
3. Select ” Search for the best driver for your device (Recommended) ”.
Click on ” Next ”.

Manual 800 USB Rev1.0
7
4. Specify the location of the driver or click on ” Browse ”.
Click on ” Next ”.
5. Click on ” Next ”.

Manual 800 USB Rev1.0
8
6. Click on ” Finish ”.
After the USB driver installation, the ” ADSL USB Modem Configuration Wizard ”
will start automatically.
How to configure the ADSL USB modem see chapter ” ADSL USB Modem
Configuration Wizard ”.

Manual 800 USB Rev1.0
9
ADSL USB modem driver installation under Windows ME .
1. Place the CD - ROM in the CD - ROM drive.
After you plugged in the USB cable in the ADSL USB modem and your computer,
Windows automatically detects new hardware.
2. Se lect ” Specify the location of the driver (Advanced) ”.
Click on “ Next ”.
3. Specify the location of the driver or click on ”Browse” .
Click on ”Next” .

Manual 800 USB Rev1.0
10
4. Click on ”Next” .
5. Click on ” Finish ”.
After the USB driver installation, the ” ADSL USB Modem Configuration Wizard ”
will start automatically.
How to configure the ADSL USB modem see chapter ” ADSL USB Modem
Configuration Wizard ”.

Manual 800 USB Rev1.0
11
ADSL USB modem driver installation under Windows 2000.
1. Place the CD -RO M in the CD - ROM drive.
After you plugged in the USB cable in the ADSL USB modem and your computer,
Windows automatically detects new hardware.
2. Click on ” Next ”.
3. Select ” Search for a suitable driver for my device (recommended) ”.
Click on ” Next ”.

Manual 800 USB Rev1.0
12
4. Select ” Specify a location ”.
Click on ” Next ”.
5. Specify the location of the driver or click on ” Browse ”.
Click on ”OK ”.

Manual 800 USB Rev1.0
13
6. Select the ” TIDSL32 ” file and click on ” Open ”.
7. After you have selected the TIDSL32 file, click on ”OK ”.

Manual 800 USB Rev1.0
14
8. Click on ” Next ”.
After the USB driver installation, the ” ADSL USB Modem Configuration Wizard ”
will start automatically.
How to configure the ADSL USB modem see chapter ” ADSL USB Modem
Configuration Wizard ”.

Manual 800 USB Rev1.0
15
ADSL USB modem driver installation under Windows XP.
1. Place the CD - ROM in the CD - ROM drive.
After you plugged in the USB cable in the ADSL USB modem and your computer,
Windows automatically detects new hardware.
2. Select ” Install from a list or specific location (Advanced) ”.
Click on ” Next ”.
3. Specify the location of the driver or click on ”Browse” .
Click on ”Next” .
After the USB driver installation, the ” ADSL USB Modem Configuration Wizard ”
will start automatically.
How to configure the ADSL USB modem see chapter ” ADSL USB Modem
Configuration Wizard ”.

Manual 800 USB Rev1.0
16
ADSL USB Modem Configuration Wizard
The screenshots are from Windows 98 SE. The screenshots can differ f rom other Windows
versions.
1. After the USB driver is installed successfully, the ADSL USB Modem Configuration
Wizard will start automatically.
2. Click on ” Next ”.

Manual 800 USB Rev1.0
17
Configuring the ADSL USB modem by option 1
3. Select the first option (Preconfigured DSL service provider).
Select the provider from the list and click on ” Next ”.
For option 2 and 3 see next chapter.
- Configuring the ADSL USB modem by option 2 (page 21)
- Configuring the ADSL USB modem by option 3 (page 24)
4. Click on ” Finish ”.
If you click on the save button, you can save the profile on your computer.
Windows 98 SE will ask for the Windows 98 SE CD.

Manual 800 USB Rev1.0
18
5. Click on ”OK ”.
Your computer will now reboot.
This screen only appears when you use a dail - up for the first time, otherwise go to step 7.
6. Fill in the required information, and click on ” Close ”.
If you have configured the ADSL USB modem for PPPoA or PPPoE a DUN wi ll be
placed on your desktop, otherwise the ADSL USB modem installation and configuration
is finished.

Manual 800 USB Rev1.0
19
7. Double click on the ” ADSL USB Modem Connection ” dail - up icon.
8. Fill in Username and Password, and click on ” Connect ”.

Manual 800 USB Rev1.0
20
9. Your are now connected to the internet.
Click on ” Close ”.