Allied Telesis AT-BMGMT User manual

AT-BMGMT
Management
Module
For the AT-8324SX Fast Ethernet
Switch
Quick Install Guide
PN 613-50119-00 Rev A

Copyright  2000 Allied Telesyn International, Corp.
960 Stewart Drive Suite B, Sunnyvale CA 94086 USA
All rights reserved. No part of this publication may be reproduced without prior
written permission from Allied Telesyn International, Corp.
Ethernet is a registered trademark of Xerox Corporation. All other product names,
company names, logos or other designations mentioned herein are trademarks or
registered trademarks of their respective owners.
Allied Telesyn International, Corp. reserves the right to make changes in specifications
and other information contained in this document without prior written notice. The
information provided herein is subject to change without notice. In no event shall
Allied Telesyn International, Corp. be liable for any incidental, special, indirect, or
consequential damages whatsoever, including but not limited to lost profits, arising out
of or related to this manual or the information contained herein, even if Allied Telesyn
International Corp. has been advised of, known, or should have known, the possibility of
such damages.

iii
Safety Warnings
Standards: This product meets the following standards.
RFI Emission EN55022 (1998)/CISPR-22 (1995) Class A 1
EN60555-2 (1995) Class A
EN60555-3
WARNING: In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures. 2
Immunity IEC 1000-4-2 (4 kV CD, 8 kV AD) 3
IEC 1000-4-3 (1995) (3 V/m)
IEC 1000-4-4 (1995) (1.0 kV - (power line);
0.5 kV - (signal line))
IEC 1000-4-6 (1995) (3 Vrms)
EN50082-1 (1995)
EN61000-4-2 (1995)
EN61000-4-4 (1995)
Electrical Safety CSA/NRTL (CSA 22.2.950& UL 1950) 4
EN60950 (TUV/GS)
IMPORTANT: Appendix A contains translated safety statements for installing this
equipment. When you see the , go to Appendix A for the translated safety statement in
your language.
WICHTIG: Anhang A enthält übersetzte Sicherheitshinweise für die Installation dieses
Geräts. Wenn Sie sehen, schlagen Sie in Anhang A den übersetzten Sicherheitshinweis
in Ihrer Sprache nach.
VIGTIGT: Tillæg A indeholder oversatte sikkerhedsadvarsler, der vedrører installation
af dette udstyr. Når De ser symbolet , skal De slå op i tillæg A og finde de oversatte
sikkerhedsadvarsler i Deres eget sprog.
BELANGRIJK: Appendix A bevat vertaalde veiligheidsopmerkingen voor het installeren
van deze apparatuur. Wanneer u de ziet, raadpleeg Appendix A voor vertaalde
veiligheidsinstructies in uw taal.
IMPORTANT: L'annexe A contient les instructions de sécurité relatives à l'installation
de cet équipement. Lorsque vous voyez le symbole , reportez-vous à l'annexe A pour
consulter la traduction de ces instructions dans votre langue.
TÄRKEÄÄ: Liite A sisältää tämän laitteen asentamiseen liittyvät käännetyt turvaohjeet.
Kun näe -symbolin, katso käännettyä turvaohjetta liitteestä A.
IMPORTANTE: l’Appendice A contiene avvisi di sicurezza tradotti per l’installazione di
questa apparecchiatura. Il simbolo , indica di consultare l’Appendice A per l’avviso di
sicurezza nella propria lingua.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the
FCC, can void your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.

iv
VIKTIG: Tillegg A inneholder oversatt sikkerhetsinformasjon for installering av dette
utstyret. Når du ser , åpner du til Tillegg A for å finne den oversatte
sikkerhetsinformasjonen på ønsket språk.
IMPORTANTE: O Anexo A contém advertências de segurança traduzidas para instalar
este equipamento. Quando vir o símbolo, leia a advertência de segurança traduzida no
seu idioma no Anexo A
IMPORTANTE: El Apéndice A contiene mensajes de seguridad traducidos para la
instalación de este equipo. Cuando vea el símbolo , vaya al Apéndice A para ver el
mensaje de seguridad traducido a su idioma.
OBS! Bilaga A innehåller översatta säkerhetsmeddelanden avseende installationen av
denna utrustning. När du ser , skall du gå till Bilaga A för att läsa det översatta
säkerhetsmeddelandet på ditt språk.

v
Safety Warnings .............................................................................................iii
Table of Contents ........................................................................................... v
Welcome to Allied Telesyn ......................................................................... vii
Where to Find Web-based Guides....................................................................vii
Document Conventions....................................................................................viii
Contacting Allied Telesyn ...............................................................................viii
On-line Support ........................................................................................viii
For Technical Support and Services........................................................viii
Technical Support E-mail Addresses ........................................................ ix
Returning Products............................................................................................ ix
FTP Server .......................................................................................................... x
For Sales or Corporate Information................................................................... x
Tell Us What You Think..................................................................................... x
Overview .......................................................................................................... 1
Installing the AT-BMGMT Management Module............................................. 2
Verifying the Package Contents ................................................................. 2
Reviewing Safety Guidelines ...................................................................... 2
Handling the Module................................................................................... 3
Installing the Module .................................................................................. 4
Making the Console Port Connection ......................................................... 5
Troubleshooting .................................................................................................. 6
Warranty Registration ....................................................................................... 6
Technical Specifications ..................................................................................... 7
Connectivity Guidelines ..................................................................................... 8
Appendix A
Translated Electrical Safety and Emission Information ...................... 9
Appendix B
Technical Support Fax Order ................................................................... 21
Incident Summary ............................................................................................ 21
Appendix C
AT-BMGMT Quick Install Guide Feedback ............................................ 23
Table of Contents

vii
This guide contains instructions on how to install the AT-BMGMT
Management Module in an AT-8324SX Fast Ethernet Switch.
Where to Find Web-based Guides
The Allied Telesyn web site at www.alliedtelesyn.com provides you with an
easy way to access the most recent documentation and technical information
for all of our products. All web-based documents relating to this product and
other Allied Telesyn products can be downloaded from the web site in pdf
format.
There are several other manuals that you will need in addition to this guide in
order to install and manage your AT-8324SX Fast Ethernet Switch. The
following manual, which is available from the Allied Telesyn web site,
contains complete installation instructions for the switch:
❑AT-8324SX Fast Ethernet Switch Installation Guide,
PN 613-50118-00
Once you have installed the switch and the AT-BMGMT Management
Module, you will need to download the following manual from the web site for
instructions on how to use the AT-S29 management software:
❑AT-S29 Management Software User’s Guide, PN 613-50115-00
If you purchased an AT-BSTACK1 Stacking Module or a media expansion
module, such as an AT-B15/SX, refer to the documentation included with the
module for installation instructions.
Welcome to Allied Telesyn

viii
Document Conventions
This guide uses several conventions that you should become familiar with first
before you begin to install the product.
Note
A note provides additional information.
Caution
A caution indicates that performing or omitting a specific action may
result in equipment damage or loss of data.
Warning
A warning indicates that performing or omitting a specific action
may result in bodily injury.
Contacting Allied Telesyn
There are several ways that you can contact Allied Telesyn technical support:
on-line, telephone, fax and e-mail.
On-line Support
You can request technical support on-line by filling out the Tech-Assistant
Form at www.alliedtelesyn.com/forms/feedtech.htm.
For Technical Support and Services
Americas
United States, Canada, Mexico,
Central America, South America
Tel: [phone], option 4
Fax: [phone]
Germany
Germany, Switzerland, Austria, Eastern
Europe
Tel: [phone]
Fax: [phone]
Asia
Singapore, Taiwan, Thailand, Malaysia,
Indonesia, Korea, Philippines, China,
India, Hong Kong
Tel: [phone]
Fax: [phone]
Italy
Italy, Spain, Portugal, Greece, Turkey,
Israel
Tel: [phone]
Fax: [phone]

AT-BMGMT Quick Install Guide
ix
Technical Support E-mail Addresses
United States and Canada
[e-mail]
Latin America, Mexico, Puerto Rico, Caribbean, and Virgin Islands
[e-mail]
United Kingdom, Sweden, Norway, Denmark, and Finland
[e-mail]
Returning Products
Products for return or repair must first be assigned a Return Materials
Authorization (RMA) number. A product sent to Allied Telesyn without a
RMA number will be returned to the sender at the sender’s expense.
To obtain an RMA number, contact Allied Telesyn’s Technical Support at one
of the following locations:
Australia
Tel: [phone]
Fax: [phone]
Japan
Tel: [phone]
Fax: [phone]
France
France, Belgium, Luxembourg,
The Netherlands, Middle East, Africa
Tel: [phone]
Fax: [phone]
United Kingdom
United Kingdom, Denmark, Norway,
Sweden, Finland
Tel: [phone]
Fax: [phone]
North America
2205 Ringwood Ave
San Jose, CA 95131
Tel: [phone], option 4
Fax: [phone]
European Customer Support Centre
10/11 Bridgemead Close
Westmead Industrial Estate
Swindon, Wiltshire SN5 7YT
England
Tel: [phone]
Fax: [phone]
Latin America, the Caribbean,
Virgin Islands
Tel: international code + 425-481-3852
Fax: international code + 425-483-9458
Mexico and Puerto Rico
Tel: [phone], ext 3852 or
1-800-424-4284, ext 3852
Mexico only: 95-800-424-5012, ext 3852
Fax: international code + 425-489-9191

x
FTP Server
If you need a device driver for an Allied Telesyn device and you know the
name of the driver, you can download the driver by connecting directly to our
FTP server at ftp://gateway.centre.com.
At login, enter ‘anonymous’. Enter your e-mail address for the password as
requested by the server at login.
For Sales or Corporate Information
Tell Us What You Think
If you have any comments or suggestions on how we might improve this or
other Allied Telesyn documents, please fill out the “AT-BMGMT Quick Install
Guide Feedback” on page 23 and return the form to us at the address or fax
number provided. You can also provide feedback on-line by filling out the
Feedback on Documentation form at www.alliedtelesyn.com/forms/
feedmanu.htm.
Allied Telesyn International, Corp.
19800 North Creek Parkway, Suite 200
Bothell, WA 98011
Tel: [phone]
Fax: [phone]
Allied Telesyn International, Corp.
960 Stewart Drive, Suite B
Sunnyvale, CA 94086
Tel: [phone] (USA and Canada)
Fax: [phone]

1
Overview
The AT-BMGMT Management Module is designed for the AT-8324SX Fast
Ethernet Switch. The module can be used to manage an AT-8324SX switch or
an AT-8324SX stack. It offers a variety of management options, including
SNMP, RMON, and a web-based interface. An RS-232 port on the module
provides for out-of-band management.
The installation of the module adds a wide range of advanced performance-
enhancing features to the switch, including port-based and tagged VLANs,
plus Quality of Service (QoS), which ensures the minimum delay for moving
real-time multi-media data across the network.
Figure 1 AT-BMGMT Management Module
Caution
The AT-BMGMT Management Module is designed for the AT-8324SX
Fast Ethernet Switch only. Do not install this module in any other
Allied Telesyn device.
For installation instructions for the AT-8324SX switch, refer to the AT-
8324SX Fast Ethernet Switch Installation Guide. For instructions on how to
manage a switch or stack, refer to the AT-S29 Management Software User’s
Guide. Both of these guides are available from the Allied Telesyn web site.

2
Installing the AT-BMGMT Management Module
The following sections contain instructions on how to install the module.
Verifying the Package Contents
Check to be sure that your package contains the following items. If any of the
items are missing or damaged, contact your Allied Telesyn representative.
One AT-BMGMT Management Module
One Null-modem Cable
Warranty Card
This Quick Install Guide
Reviewing Safety Guidelines
Please review the following safety guidelines before you begin to install the
module in the switch.
Warning
Electric Shock Hazard: To prevent electric shock, do not remove the
cover. There are no user-serviceable parts inside. The unit contains
hazardous voltages and should only be opened by a trained and
qualified technician. 5
Warning
Lightning Danger: Do not work on this equipment or cables during
periods of lightning activity. 6
Warning
Power cord is used as a disconnection device: To de-energize
equipment, disconnect the power cord. 7
Warning
Electrical-Type Class 1 Equipment: This equipment must be
earthed. The power plug must be connected to a properly wired earth
ground socket outlet. An improperly wired socket outlet could place
hazardous voltages on accessible metal parts. 8
Caution
Pluggable Equipment: The socket outlet should be installed near the
equipment and should be easily accessible. 9

AT-BMGMT Quick Install Guide
3
Caution
Air vents: The air vents must not be blocked on the unit and must have
free access to the room ambient air for cooling. 10
Caution
Operating Temperature: This product is designed for a maximum
ambient temperature of 40°C. 11
Caution
All Countries: Install this product in accordance with local and
National Electric Codes. 12
Handling the Module
Caution
The AT-BMGMT Management Module can be easily damaged by
electrostatic discharge.
To prevent electrostatic damage, observe the following guidelines:
Do not remove the module from its packaging until you are ready to
install it.
Do not touch any of the module’s pins, connectors or components.
Hold the module only by its edges or front panel.
Wear an anti-static wristband connected to a suitable earth ground
whenever handling the module.
Store or transport this module only in appropriate anti-static
packaging.

4
Installing the Module
To install the module, perform the following procedure:
1. Power off the switch by disconnecting the AC power cord from the switch.
If the switch is connected to a redundant power unit (RPU), disconnect the
DC cable connection to the switch.
Caution
The switch must be powered off before installing or replacing the
module. Installing the module with the switch powered on can damage
the module.
Note
If you have created a stack of AT-8324SX switches, you must install the
AT-BMGMT Management Module in the bottom or the top switch in the
stack.
2. Using a flathead screwdriver, loosen the screws securing the faceplate to
the top expansion slot on the switch and remove the faceplate.
Caution
The management module must be installed in the top expansion slot on
the switch. Do not install the module in any other expansion slot.
Note
Keep the original faceplate for future use. If you should remove the
module, replace the faceplate to prevent dust and debris from entering
the unit and to maintain proper air flow.
Figure 2 Removing the Faceplate

AT-BMGMT Quick Install Guide
5
3. Insert the AT-BMGMT Management Module into the switch. Holding the
new module with the text on the front panel upright, carefully slide the
module into the slot, ensuring that the edge connector is fully engaged.
Once the module is installed, check to be sure that the front panel of the
module is flush against the switch.
4. Secure the new module in place by tightening the retainer screws.
Making the Console Port Connection
To connect a VT100 compatible terminal or a PC with a terminal emulation
program to the RS232 console on the management module, perform the
following procedure:
1. Connect one end of the null-modem interface cable supplied with the
management module to the RS232 console port on the module. Tighten the
retaining screws to secure the cable to the module.
Figure 3 Connecting a Terminal to the Console Port
2. Connect the other end of the null-modem cable to a terminal or a PC with
a terminal emulation program.
3. Configure the terminal or the terminal emulation program as follows:
Type: VT100
Data Rate: 9600 baud
Parity: none
Data Bits: 8
Stop Bits: 1
AT-BMGMT
Module
Null-modem cable
Terminal

6
Flow Control: none
Character Set: ASCII
4. Power on the switch or stack.
For instructions on how to configure the switch using the AT-S29
management software, refer to the AT-S29 Management Software User’s
Guide.
If the management module is not functioning properly, see "Troubleshooting"
below.
Troubleshooting
If you experience any problems with the management module, check the
following items before contacting Allied Telesyn Technical Support:
Ensure that the module is properly seated in the slot.
Check the connectors on the null-modem cable to be sure that they are
firmly connected to the RS-232 ports on the terminal and the
management module.
Warranty Registration
When you have finished installing the module, register your product by
completing the enclosed warranty card and sending it in, or by visiting our
web site at www.alliedtelesyn.com/forms/warranty.htm and completing
the on-line registration form.

AT-BMGMT Quick Install Guide
7
Technical Specifications
Table 1 lists the technical specifications of the module.
Table 1 Technical Specifications
Physical Specifications
Ports One RS-232 serial port
Cable Type Standard RS-232 cable
Environmental Specifications
Operating Temperature 0° C to 50° C (32° to 122° F)
Storage Temperature -20° C to 70° C (-4° to 158° F)
Operating Humidity 5% to 95% non-condensing
Power Specifications
Maximum Power Consumption 2 watts
Standards IEEE 802.3u
ISO/IEC 8802-3
Agency Compliance
EMI/EMC FCC Class A, EN55022 (CISPR22) Class A, VCCI
Class A, CE Mark
Immunity IEC 1000-4-2/3/4/6, EN50082-1
Safety UL 1950, CSA C22.2 No. 950, EN60950

8
Connectivity Guidelines
Table 2 Console Port to 9-Pin COM Port on PC
Switch’s 9-Pin Serial Port CCITT Signal PC’s 9-Pin COM Port
1 DCD ----- DCD ----- 1
2 RXD <----- TXD ----- 3
3 TXD ----- RXD -----> 2
4 DTR ----- DSR -----> 6
5 SGND ----- SGND ----- 5
6 DSR ----- DTR ----- 4
7 RTS ----- CTS -----> 8
8 CTS <----- RTS ----- 7
9 RI ----- RI ----- 9

9
Appendix A
Translated Electrical Safety and Emission
Information
IMPORTANT: This appendix contains multiple-language translations for the
safety statements in this guide.
WICHTIG: Dieser Anhang enthält Übersetzungen der in diesem Handbuch
enthaltenen Sicherheitshinweise in mehreren Sprachen.
VIGTIGT: Dette tillæg indeholder oversættelser i flere sprog af
sikkerhedsadvarslerne i denne håndbog.
BELANGRIJK: Deze appendix bevat vertalingen in meerdere talen van de
veiligheidsopmerkingen in deze gids.
IMPORTANT: Cette annexe contient la traduction en plusieurs langues des
instructions de sécurité figurant dans ce guide.
TÄRKEÄÄ: Tämä liite sisältää tässä oppaassa esiintyvät turvaohjeet usealla
kielellä.
IMPORTANTE: questa appendice contiene traduzioni in più lingue degli
avvisi di sicurezza di questa guida.
VIKTIG: Dette tillegget inneholder oversettelser til flere språk av
sikkerhetsinformasjonen i denne veiledningen.
IMPORTANTE: Este anexo contém traduções em vários idiomas das
advertências de segurança neste guia.
IMPORTANTE: Este apéndice contiene traducciones en múltiples idiomas de
los mensajes de seguridad incluidos en esta guía.
OBS! Denna bilaga innehåller flerspråkiga översättningar av
säkerhetsmeddelandena i denna handledning.

10
Standards: This product meets the following standards:
1RFI Emission EN55022 (1998)/CISPR-22 (1995) Class A
EN60555-2 (1995) Class A
EN60555-3
2 WARNING: In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
3Immunity IEC 1000-4-2 (4 kV CD, 8 kV AD)
IEC 1000-4-3 (1995) (3 V/m)
IEC 1000-4-4 (1995) (1.0 kV - (power line);
0.5 kV - (signal line))
IEC 1000-4-6 (1995) (3 Vrms)
EN50082-1 (1995)
EN61000-4-2 (1995)
EN61000-4-4 (1995)
4Electrical Safety CSA/NRTL (CSA 22.2.950& UL 1950)
EN60950 (TUV/GS)
SAFETY
5 ELECTRICAL NOTICES
WARNING: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable parts
inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a
trained and qualified technician. To avoid the possibility of ELECTRIC SHOCK,
disconnect electric power to the product before connecting or disconnecting the LAN
cables.
6 LIGHTNING DANGER
DANGER: DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.
7CAUTION:
POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-
ENERGIZE EQUIPMENT, disconnect the power cord.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with this
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or
the FCC, can void your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement
sur le matériel brouilleur du Canada.