Allied Telesis Tornado 562 S II User manual

Tornado 562 S II
User Manual

56K PCI DATA/FAX Modem i
Contents
1. Package Contents..................................................................................................................... 1
2. Minimum System Requirement............................................................................................. 2
3. Panel Descriptions ................................................................................................................... 3
4. Hardware Installation............................................................................................................... 4
5. Installing The Modem Drivers ............................................................................................... 5
A. Windows 98: ........................................................................................................................... 5
B. Windows ME:........................................................................................................................ 13
C. Windows XP : ....................................................................................................................... 21
D. Windows 2000 :.................................................................................................................... 30
6. Troubleshooting : ................................................................................................................... 40

56K PCI DATA/FAX Modem 1
1. Package Contents
Carefully unpack and remove the contents and contact your dealer immediately if any of the following item is
missing or damaged :
;56K PCI Analog Modem
;Telephone cable
;Quick Start Guide
;CD-Title with Windows driver and user manual

56K PCI DATA/FAX Modem 2
2. Minimum System Requirement
;PC-based computer with Pentium III and above processor.
;One free PCI Bus slot.
;64MB RAM or more.
;20MB hard disk space ( System files and modem drivers only ).
;CD-ROM drive.
;Windows 98SE/ME/XP/2000 Operating System.

56K PCI DATA/FAX Modem 3
3. Panel Descriptions
Back Panel :
LINE RJ-11 jack connecting to Telephone Line.
PHONE RJ-11 jack connecting to Telephone set.

56K PCI DATA/FAX Modem 4
4. Hardware Installation
1. Turn off your computer.
2. Open the case of your PC and plug the 56K PCI Modem card into a free PCI slot on your motherboard.
3. Fix the 56K PCI Modem card onto your case and then close your computer case.
4. Unplug the telephone line from the wall socket, then plug the telephone line into the socket on the back of
the modem marked PHONE.
5. Plug the phone cord supplied into the socket on the back of the modem marked LINE then Plug the other
end of the cord into the wall socket.
6. Power on your computer.
7. This completes the setting up of your modem hardware. Please proceed to the next section for information
on installing the modem drivers in Windows 98SE/ME/XP/2000.
NOTE : You need to have an account from an Internet service provider in order to
connect to Internet.

56K PCI DATA/FAX Modem 5
5. Installing The Modem Drivers
A. Windows 98:
Driver Installation :
1. Power on your computer to start Windows 98. Windows 98 will detect the newly-installed modem and a
“Add New Hardware Wizard” window will appear. Click “Cancel” to close the hardware wizard, then
place your Driver CD into the CD-ROM drive.
2. Windows system will automatically install the device driver and copy all the necessary files to your
system. An “Under Installation, please wait ..” icon will appear indicates the files copying process.

56K PCI DATA/FAX Modem 6
3. A “Location Information” wizard will pop-up. Fill in your location information then click “Close” to
continue.
4. A “Make New Connection” wizard will pop-up during the driver installation process. Manually enter a
name for the computer you are going to dial then click “Next” to continue.

56K PCI DATA/FAX Modem 7
5. Manually enter the phone number to dial then click “Next” to continue. Check your ISP for the correct
phone number and setting.
6. The Setup Wizard will ask you to review your settings before it starts to copy necessary files to your
system. Click “Finish” if you are confirmed with your setting, or click “Back” to make any necessary
changes.

56K PCI DATA/FAX Modem 8
7. An “Install Finish !!” wizard will pop-up. Click “OK” to complete the Auto Installation process.
8. Move your cursor as following sequence: “Start” ΓSettings” ΓControl Panel” and double click
on the “Modem” icon.

56K PCI DATA/FAX Modem 9
9. The following window will pop-up. Click the “Diagnostics” tab and select the “PCI SoftV92 Modem”
from the list then click “More Info..”.
10. The following window will pop-up. The PCI modem will responding to AT command set if the driver is
properly installed and functioning correctly. Click “OK” to close the diagnostic process.

56K PCI DATA/FAX Modem 10
Making sure of Internet connection
1. Move your cursor as following sequence: “Start” ΓPrograms” ΓAccessories” Î
“Communications” ΓDial-Up Networking”. The following window will pop-up. Double click on the
“56K PCI Modem Connection” icon.
2. The following window will pop-up. Manually enter your “User name” and “Password” which provided
by your ISP, then click “Connect”.

56K PCI DATA/FAX Modem 11
3. The following connection and authentication icon will pop-up.
4. Launch your web browser, and enter the Google Web Address: “www.google.com” in the address field
then press “Enter”. The following Google website index page will display on your screen. This shows
your 56K Modem connection is correctly set and access to the Internet is now available.
5. Once you have successful connected to the Internet, a connected icon will automatically appears in you
Window System task bar. This icon will lit when receiving or transmitting data from or to the Internet.
Double click the connection icon and the following window will be shown. Click “Disconnect” tab to end
up the Internet connection.

56K PCI DATA/FAX Modem 12
Uninstalling the Driver
1. To uninstall the 56K Modem form your system, click “Start” ΓSettings” ΓControl Panel” and
double click on the “Modems” icon. The following window will pop-up. Click “Remove” tab. The
uninstall wizard will guides you and remove all the necessary files from your system.

56K PCI DATA/FAX Modem 13
B. Windows ME:
Driver Installation :
1. Power on your computer to start Windows ME. Windows ME will detect the newly-installed modem and
a“Add New Hardware Wizard” window will appear. Click “Cancel” to close the hardware wizard, then
place your Driver CD into the CD-ROM drive.
2. Windows system will automatically install the device driver and copy all the necessary files to your
system. An “Under Installation, please wait ..” icon will appear indicates the files copying process.

56K PCI DATA/FAX Modem 14
3. A “Location Information” wizard will pop-up. Fill in your location information then click “Close” to
continue.
4. A “Make New Connection” wizard will pop-up during the driver installation process. Manually enter a
name for the computer you are going to dial then click “Next” to continue.

56K PCI DATA/FAX Modem 15
5. Manually enter the phone number to dial then click “Next” to continue. Check your ISP for the correct
phone number and setting.
6. The Setup Wizard will ask you to review your settings before it starts to copy necessary files to your
system. Click “Finish” if you are confirmed with your setting, or click “Back” to make any necessary
changes.

56K PCI DATA/FAX Modem 16
7. An “Install Finish !!” wizard will pop-up. Click “OK” to complete the Auto Installation process.
8. Move your cursor as following sequence: “Start” ΓSettings” ΓControl Panel” and double click
on the “Modem” icon.

56K PCI DATA/FAX Modem 17
9. The following window will pop-up. Click the “Diagnostics” tab and select the “PCI SoftV92 Modem”
from the list then click “More Info..”.
10. The following window will pop-up. The PCI modem will responding to AT command set if the driver is
properly installed and functioning correctly. Click “OK” to close the diagnostic process.

56K PCI DATA/FAX Modem 18
Making sure of Internet connection
1. Move your cursor as following sequence: “Start” ΓPrograms” ΓAccessories”Î
“Communications” ΓDial-Up Networking”. The following window will pop-up. Double click on the
“56K PCI Modem Connection” icon.
2. The following window will pop-up. Manually enter your “User name” and “Password” which provided
by your ISP, then click “Connect”.