Allied Telesis AT-2750FX/ User manual

Allied Telesis www.alliedtelesis.com
Datasheet | Network Interface Cards
AT-2750FX
Fast Ethernet Secure Fiber Interface Card
A
T-2750FX/xx
100FX 32-bit, PCI 2.2 compliant secure fiber
interface card
Secure Fiber Network Interface
Card
The AT-2750FX secure interface card hardens
at-risk systems without impacting performance.
It features an embedded security processor to
offload encryption, authentication, and other
cycle-intensivetasks from the host CPU—
resulting in optimal system and application
response.The types of encryption supported
are DES, 3DES, FIPS capable (not certified) and
AES (upon Vista release - pending).
Encryption
DES: The Data Encryption Standard (DES) is a
56-bit key method for encrypting information
selected as an official Federal Information
Processing Standard (FIPS) for the United States
in 1976.
3DES: The Triple Data Encryption Standard
(3DES) is the successor of DES, and uses a
168-bit sized key. 3DES is very secure.
AES: Advanced Encryption Standard (AES) is a
block cipher adopted as an encryption standard
bythe US government. It has been analyzed
extensively and is now used widely worldwide.
AES was announced bythe National Institute of
Standards and Technology (NIST) as US FIPS
PUB 197 (FIPS 197) and became a standard in
May 26, 2002.
FIPS: The Federal Information Processing
Standard 140 (FIPS) are a series of US
government computer security standards that
specify requirements for cryptographymodules.
Key Features
Advance Properties
•Secured transmission
•PCI 2.2 capable
•Lowprofile and standard height brackets
included
•RoHS compliant
•3DES
•AES
•IPv6
•Compliant with Trade Agreement Act

USA Headquarters |19800 North Creek Parkway |Suite 200 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 Tai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2007 AlliedTelesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000236 Rev. C
AT-2750FX |Fast Ethernet Secure Fiber Interface Card
Specifications
Bus Type
PCI 2.2
Ethernet Standards
IEEE 802.2 LLC
IEEE 802.3ac MAC
IEEE 802.3u Fast Ethernet
Drivers
Supported
Windows XP
Compliance
UL
FCC/EN55022 Class B
TUV
EN55024
CE
Environmental Specifications
Operating temperature 0°C to 50°C
Storage temperature -25°C to 70°C
Relative humidity 5% to 90% non-condensing
Power
Power consumption 4.8 Watts (max)
Signaling voltage 3.3/5V
Status Indicators
LED 1 port
Link/ACT On Link activity
Blink Activity
FDX On Full-duplex mode
Off Half-duplex mode
Physical Characteristics
Dimensions 16.8cm x 6.9cm
(W x H) (6.7”) x (2.7”)
Weight 0.34lb (0.15kg)
Ships with standard bracket attached to interface card.
Low-profile bracket is included in packaging.
Connectors/Interface
SC
ST
Optical receive sensitivity (max) -31dBm
Transmit optical power (min/max) -19/-14dBm
Ordering Information
AT-2750FX/xx
100FX 32-bit, PCI 2.2 compliant secure fiber interface
card
Where xx = ST, SC
Ships with standard bracket attached to interface card.
Low-profile bracket is included in packaging.