Allied Telesis AT-2711FX User manual

Allied Telesis www.alliedtelesis.com
Datasheet | Network Interface Cards
AT-2711FX
Fast Ethernet Fiber Network Interface Card with PCI-Express
A
T-2711FX
PCIe x 1 (channel) Fast Ethernet fiber
interface card
High Reliability
The AT-2711FX Fast Ethernet fiber interface
card comes with a comprehesiveWindows
utility that performs detailed tests, diagnostics,
and analysis.
Advanced Manageability
The priority queuing offered byAT-2711FX can
help users set-up the network based on their
own needs.The comprehensive diagnostics and
configuration software suite provides system
administrators and engineers with a profound
tool to analyze the interface card and check
specific data.
MoreBandwidth with
PCI-Express Interface
AT-2711FX x1 PCI-Express (PCIe) design gives
you the maximum possible bandwidth and bus
efficiency, other benefits are: capability and low
power consumption.
Easy Migration Path for AT-2701FX
Users
For current customers who are using Allied
Telesis’ 100Mbps fiber cards (AT-2701FX), and
want to upgrade their systems to PCI-Express,
AT-2711FX is the ultimate solution.These
customers can continue using their existing
100Mbps fiber networkwithout adding any
more new equipment.
For new customers equipped with PCI-Express
systems, AT-2711FX gives them the ability to
easily build or connect to the Fast Ethernet
fiber networks.
Key Features
Management Software
•VLAN support
Advance Properties
•PCIe (PCI-Express) x1 interface
•IEEE 802.1x flowcontrol
•72KB packet buffer
•IEEE 802.1p-based traffic prioritization
•TCP checksum RX/TX supported
•PXE (2.1) remote boot support
•Wake-on-LAN (WoL)
•Jumbo packet support
•Available with SC, ST or MT-RJ multi-mode
fiber connections
•Low-profile and standard height brackets
included
•Microsoft certified drivers
•RoHS compliant
•IPv6
•Compliant with Trade Agreement Act
•SNMP
•Windows Vista

USA Headquarters |19800 North Creek Parkway |Suite 200 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 Tai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2007 AlliedTelesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000186 Rev. E
AT-2711FX |Fast Ethernet Fiber Network Interface Card with PCI-Express
Ordering Information
AT-2711FXxx-yyy
PCIe x 1 (channel) Fast Ethernet fiber interface card
Where xx = SC for multi-mode SC fiber connector
ST for multi-mode ST fiber connector
MT for multi-mode MT-RJ fiber connector
Where yyy 001 for single pack
020 for 20-pack
901 for single pack, Federal and
Government
920 for 20-pack, Federal and Government
Ships with standard bracket attached to interface card.
Low-profile bracket is included in packaging.
Specifications
Management Features
WMI
ACPI 2.0/wOI
PXE 2.1 Boot ROM
SNMP
Bus Type
PCIe x1
Ethernet Standards
IEEE 802.1p Quality of Service
IEEE 802.1Q VLANs
IEEE 802.2 LLC
IEEE 802.3ac MAC
IEEE 802.3 10 Ethernet
IEEE 802.3u Fast Ethernet
Drivers
Supported
Vista
Vista 64-bit
Windows XP
Windows XP 64-bit
Windows 2003
Windows 2003 64-bit
Windows 2000
NDIS2
NetWare 6.x
Linux 2.4
Linux 2.6
Available
Windows NT 4
Solaris x86
Solaris Sparc 32-bit
Solaris Sparc 64-bit
NetWare 5.x
Compliance
RoHS
UL
FCC/EN55022 Class B
TUV
EN55024
CE
C-TICK
VCCI
Connectors
SC
MT-RJ
Optical receive sensitivity (max) -31dBm
Transmit optical power (min/max) -19/-14dBm
Environmental Specifications
Operating temperature 0°C to 50°C
Storage temperature -25°C to 70°C
Relative humidity 5% to 90% non-condensing
Power
Power consumption 2.6 Watts (max)
Signaling voltage 3.3V
Status Indicators
LED 1 port
100 ON 100Mbps link up
OFF 100Mbps link down
Blink Activity
Physical Characteristics
Dimensions 12.1cm x 6.9cm
(W x H) (4.84”) x (2.7”)
Weight 0.12lb (50g)
Ships with standard bracket attached to interface card.
Low-profile bracket is included in packaging.
Maximum Cabling Distances
Up to 2000 meters (6,560 ft.) in full-duplex
Up to 412 meters (1,351 ft.) in half-duplex
Network Controller
Broadcom BCM5752