Allied Telesis AT-SPFXBD-LC-13 User manual

Datasheet | Pluggable Transceivers
AT-SPFXBD
Small Form Pluggable (SFP) Modules
Allied T
elesis www.alliedtelesis.com
AT-SPFXBD-LC-13
15km, 100FX, BiDi SFP (1310/1550)
AT-SPFXBD-SC-13
15km, 100FX, BiDi SFP (1310/1550)
AT-SPFXBD-LC-15
15km, 100FX, BiDi SFP (1550/1310)
AT-SPFXBD-SC-15
15km, 100FX, BiDi SFP (1550/1310)
Industry Standard
The AT-SPFXBD-xx offers the latest industry
standard in Bi-Directional 100FX connectivity.
These hot swappable, fiber interfaces simply
plug into an SFP slot on an Allied Telesis 100FX
SFP compatible product.
Description
The AT-SPFXBD-xx is a 3.3V SFP BiDi
transceiver module designed for high-speed
applications which require up to 155Mbit/sec
transmission rates. It is compliant with Fast
Ethernet (100mbps), ATM, SONET
,OC-3/SDH,
and STM-1 standards, as well as the SFP
Multisource Agreement (MSA).
The SFP uses the industry standard SC
connector type.The transceiver includes a LOS
(Loss Of Signal) circuit that provides a TTL
logic-high output when an unusable optical
signal level is detected.The module includes
1310nm un-cool FP laser,InGaAs PIN, Pre-
amplifer and WDM filter in a high-integrated
optical assembly for high density system
application.
Using an SFP Bi-Directional transceiver can
upgrade transmission capacity on a typical
network without installing new fibers by utilizing
asingle fiber for both the send/receive signals.
Options
Allied Telesis offers a wide range of SFP
modules. Available in multi-mode and single-
mode, ranging in speed from Fast Ethernet to
Gigabit and with distances of up to 80km, Allied
Telesis offers options for your network.
Product Compatibility
The SPFX series SFPs are compatible with all
the Allied Telesis range of products that support
100Mbps SFP uplink connections.
Key Features
•SC or LC connector
•Connect up to 15km
•Compact size
•Hot swappable
•Self-locking mechanism
•Support for ATM, SONET, OC-3/SDH, STM-1
•Two year warranty
•RoHS compliant
•SFF-8472 MSA compliant
•Industrial operating temperature
•China RoHS

Specifications
Technical Specifications
Absolute Maximum Ratings
Recommended Operating Conditions
Specification of Transmitter
Ordering Information
AT-SPFXBD-LC-13
15km, 100FX, BiDi SFP (1310/1550)
AT-SPFXBD-SC-13
15km, 100FX, BiDi SFP (1310/1550)
AT-SPFXBD-LC-15
15km, 100FX, BiDi SFP (1550/1310)
AT-SPFXBD-SC-15
15km, 100FX, BiDi SFP (1550/1310)
AT-SPFXBD |Small Form Pluggable (SFP) Modules
USA Headquarters |19800 North Creek Parkway |Suite 100 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 T
ai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2008 Allied T
elesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000274 Rev A
Model Media Type Wavelength Transmit
Max. Data Rate Operating Temp Distance
AT-SPFXBD-13 SMF 1310Tx/1550Rx 155Gbps 0to 70°C 15km
AT-SPFXBD-15 SMF 1550Tx/1550Rx 155Gbps 0to 70°C 15km
Parameter Symbol Min. Typ. Max. Unit Note
Storage Temperature TS-40 85 ºC
Storage Ambient Humidity HA5 95 %
Power Supply Voltage VCC 0 5 V
Signal Input Voltage -0.3 VCC+0.3 V
Optical Input Power (Peak) 4 dBm
Parameter Symbol Min. Typ. Max. Unit Note
Ambient Operating Temperature TS0 70 ºC
Ambient Humidity HA5 85 % Non-condensing
Power Supply Voltage VCC 3.13 3.3 3.47 V
Power Supply Current ICC 250 mA
Power Supply Noise Rejection 100 mVp-p 100Hz to 1MHz
Data Rate 10 155.52 Mbps
Transmission Distance 15 km
Parameter AT-SPFXBD-13 AT-SPFXBD-15
Symbol Min. Typ. Max. Unit Symbol Min. Typ. Max. Unit
Average Launched Power Po -14 -8 dBm Po -14 -8 dBm
Optical Extinction Ratio ER 10 dB ER 10 dB
Center Wavelength λc1260 1310 1360 nm λc1480 1520 1580 nm
Spectrum Width (RMS)
σ
6 nm
σ
3 nm
Transmitter OFF Output Power POff -45 dBm POff -45 dBm
Optical Rise/Fall Time tr/tf1.3 ns tr/tf1.3 ns
Total Jitter TJ 1 ns TJ 1 ns
Optical ReturnLoss Tolerance ORLT 14 dB ORLT 14 dB
Relative Intensity Noise RIN -116 dB/Hz RIN -116 dB/Hz
Dispersion Penalty TDP 1 dB TDP 1 dB
Output Eye Mask Compliant with Bellcore TR-NWT-000253
and ITU recommendation G.957
Compliant with Bellcore TR-NWT-000253
and ITU recommendation G.957