Allied Telesis AT-8POE User manual

Allied Telesis www.alliedtelesis.com
Datasheet | Switches
A
T-8000/8POE
8port 10/100TX Layer 2 managed PoE switch
with 1 copper Gigabit port and 1 combo SFP
slot
High Performance
Allied Telesis managed switch AT-8000/8POE
provides non-blocking, wirespeed switching on
all ports.The switch offers 10/100Mbps ports for
desktop, wireless access point, printer and IP
phone connectivity and 10/100/1000T or SFP
ports for server or backbone connectivity. It also
features broadcast-storm control and full auto-
negotiation 10/100 ports which automatically
detect speed and duplex modes of attached
devices, allowing the switch to automatically
configure for the best possible performance.
Easy To Use
Allied Telesis AT-8000/8POE is tailored for
small and medium sizenetworks including
hotels, schools and universities. Allied Telesis
AT-8000/8POE switch supports Power over
Ethernet (PoE) which reduces the cost and
complexity of IP communications and wireless
LAN deployments. PoE is an advanced
technology that allows a switch to supply
power and provide Ethernet connectivity at the
same time over category 5 cable to inline
power devices, such as wireless access points,
cameras, IP phones.The PoE ports eliminate the
cost and complexity of running additional
power outlets or cable to inline power devices.
Management
Although a plug & play device, the
AT-8000/8POE switch includes an extensive
range of management features including
Web-based management, Command Line
Interfaces (CLI), SNMP and Telnet.
The AT-8000/8POE switch can be used as a
desktop switch or in a rack.The switch is
MDI/MDI-X on all ports for simple connection
to other hubs and switches. Front panel LEDs
allow users to monitor the switch status providing
simple ‘at a glance’ management.
Rich Feature Set
Richly equipped with features normally found
on higher-priced products the AT-8000/8POE
switch supports RADIUS,VLAN tagging and
more.Bandwidth hungrynetworks can
streamline traffic with the four priority queues
found in the IEEE 802.1p prioritization feature.
High traffic points can be addressed with the
IEEE 802.1ad link aggregation and LACP feature
supported. Built-in advanced security features,
including security with IEEE 802.1x
authentication help ensure that your devices and
network are protected.
Key Features
•SNMP v1 and v2
•Telnet remote login
•Non blocking architecture
•Wirespeed performance
•Rapid Spanning-Tree
•RADIUS
•Four priority queues per port
•VLAN tagging
•Portmirroring
•Link aggregation - LACP*
•SNTP*
•GVRP*
•IEEE 802.3af Power over Ethernet
*future release
AT-8000/8POE
8port 10/100TX Layer 2 Managed PoE Switch

USA Headquarters |19800 North Creek Parkway |Suite 200 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 Tai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2007 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000109 Rev. J
AT-8000/8POE |8port 10/100TX Layer 2 Managed PoE Switch
Performance
Wirespeed switching on all Ethernet ports for all packet
sizes
Throughput 2.68Mpps
Switching capacity 3.6Gbps
Store and forward mode
Non-blocking switch fabric
Head of line blocking prevention
Broadcast storm control
RAM 20MB divided into:
4MB Image storage memory
16MB dynamic memory
MAC address up to 8k
VLANs 255
GVRP*
Half/full-duplex
Auto-negotiation
Auto MDI/MDI-X on all ports
Reliability
MTBF 200,000+ hrs
MTTR <1/2 hr DoA<1%
Interface Connections
10/100TX RJ-45
10/100/1000T RJ-45
RS232 DB9 pin, male port
Internal power supply
Power Characteristics
Voltage 100-240V AC
Current 2.25A
Power consumption 30W maximum
Frequency 50-60Hz
PoE budget 95W
Environmental Specifications
Operating ttemp. 0°C to 45°C (32°F to 113°F)
Storage temp. -25°C to 70°C
(-13°Fto 158°F)
Relative humidity 10% to 90% non-condensing
Storage humidity 5% to 95% non-condensing
Operating altitude Maximum 3,000m (9,843ft)
Physical Characteristics
Dimensions 33cm x 22.8cm x 4.32cm
(W x D x H) (12.99 x 8.97 x 1.73 in)
Weight 2.2kg (4.9lbs)
Mounting
19” rack-mountable hardware included
Standards and Compliance
IEEE 802.1D Spanning-Tree Protocol
IEEE 802.1W Rapid Spanning-Tree
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN bridge
IEEE 802.1x Port-based network access control
IEEE 802.3i 10T Ethernet
IEEE 802.3ab 1000T
IEEE 802.3ac VLAN tag frame extension
IEEE 802.3ad Link aggregation – LACP*
IEEE 802.3u 100TX Ethernet
IEEE 802.3x Back pressure/ flow control
IEEE 802.3af Power over Ethernet (mode B)
IEEE 802.3z 1000SX
RFC 1112 IGMP snooping v1.0/ v2.0
RFC 2865 RADIUS
RFC 783 TFTP
RFC 951 BOOTP/ DHCP IP address management
SNMP Standards
RFC 1157 SNMPv1/v2
RFC 1213 MIB-II
RFC 1215 TRAP MIB
RFC 1493 Bridge MIB
RFC 1757 RMON 4 groups: stats, history,
alarms, events
RFC 2674 IEEE 802.1Q MIB
RFC2863 Interfaces group MIB
Allied Telesis managed switch MIB
Management Standards
Web interface – multiple sessions can be
supported at the same time
Console Command Line Interface
SNMP compatibility
Telnet remote login – multiple sessions can be
supported at the same time
Port mirroring
Dual software images
RFC 2030 SNTP*
Electrical/Mechanical Approvals
Safety UL 1950 (UL/cUL), EN60950 (TUV)
EMI FCC Class A, EN55022 Class A,
VCCI Class A, C0Tick, EN61000-3-2,
EN61000-3-3
Immunity EN55024
RoHS compliant
Country of Origin
China
Ordering Information
AT-8000/8POE-xx
8port 10/100TX managed switch with
1combo copper Gigabit port / 1 SFP slot
Where xx = 10 for US power cord
20 for no power cord
30 for UK power cord
40 for Australian power cord
50 for European power cord