Allied Telesis AT-9448T/SP AC User manual

Allied Telesis www.alliedtelesis.com
Datasheet | Switches
AT-9448T/SP
48 Port 10/100/1000T Managed Layer 3 Switch with 4 Combo SFP Bays
AT-9448T/SP
Layer 3 switch with 48 ports 10/100/1000T
plus 4 combo SFP bays
Product Overview
As a member of the 9400 series the
AT-9448T/SP is a managed Gigabit Ethernet
switch with a 1RU form factor and rich QoS
functionality. It is rack-mountable and supports
DoS attack protection.
The AT-9448T/SP is an ideal choice for small to
medium enterprises that need rich QoS
functionality and Gigabit connectivity. It offers an
extensive set of management features and
advanced QoS functionality deliversLayer 2/4
ready traffic management for VoIP networks. A
managed Gigabit Ethernet switch the
AT-9448T/SP is ready to meet the Gigabit
networking needs at the access tier of any
organization. Implemented protocols and
features are standards-based to ensure ease of
management and integration into existing
networks.
Smarter, More Secure and
More Cost-Effective
The AT-9448T/SP is a Layer 3 managed Gigabit
switch for the access edge that brings enhanced
security and intelligence to Gigabit networks.
The cost-effective AT-9448T/SP offers advanced
attack detection and suppression capabilities
for increased security and advanced QoS to
support converged applications.
The 9400 series provides the perfect
solution for:
•Traditional Enterprise LAN (wiring closet)
•Service-provisioned Leased Offices or MTUs
•Security-conscious Government Institutions
•Security-conscious Financial Institutions
•Cost/security-conscious Educational
Institutions
Network QoS and IGMP for Video
and Voice-over-IP
Arich offering of voice and video networking
features is incorporated to ensure support for
demanding multimedia networking applications
in the enterprise. Converged networking is
enhanced with QoS/Cos including eight priority
queues for IEEE 802.1p/ToS/DiffServtraffic.
The platforms high performance hardware
makes latency a non-issue and IGMP
implementation on the AT-9448T/SP is capable
of transmitting broadcast quality video
throughout the enterprise network.
Network Security
Toaddress the concern of network attacks in
the formof Denial of Service (DoS), the
AT-9448T/SP, using Layer 2-4 intelligence, can be
deployed to complement WAN firewalls and
PC anti-virus protections to further fortify the
network against malicious attacks.The
AT-9448T/SP comes pre-programmed to detect
six well known DoS attacks and supports
security features such as IEEE 802.1x (port-
based Network Access Control) and Radius/
TACACS+.
Management Stacking
Stacking provides CLI-based management of up
to 24 switches with the same effort as for one
switch.The Allied T
elesis solution uses open
standards interfaces as stacking links so that
many switches can be stacked across different
sites.
Key Features
Layer 3 Support
•RIPv2
•Static routing
•ECMP
Performance
•Throughput 71.242Mpps
•Switch fabric 96Gbps
•4096 VLANs (static and dynamic)
•256 static Layer 2 multicast groups
•255 dynamic Layer 2 multicast groups
•9K jumbo frame support
Layer 2-4 Intelligence
•Packet inspection and classification at MAC, IP,
TCP/UDP layers
•Set QoS, ACL, mirroring, and rate-limiting
using traffic classes
Security
•DoS attack protection
•Radius/TACACS+
•Port security
•SSH
•SSL
•IEEE 802.1x port-based network access
control
•Access Control Lists (ACLs)
Advanced Services
•Rate limiting (ingress and egress)
•Eight QoS service levels
•IEEE 802.1p for MAC-based QoS
•DSCP for IP-based QoS
Resiliency
•IEEE 802.1s Multiple STP
•IEEE 802.3ad link aggregation
•IEEE 802.1D Spanning-Tree
•IEEE 802.1w Rapid STP
•Temperature threshold alert
Management
•Telnet
•Web GUI
•CLI
•Dedicated management port
•Management stacking of up to 24 switches
with Enhanced StackingTM
•Compact flash slot

Allied T
elesis www.alliedtelesis.com
AT-9448T/SP | 48 Port 10/100/1000T Managed Layer 3 Switch with 4 Combo SFP Bays
Hardware Specifications
Physical Characteristics
Dimensions (H x W x D) 4.4cm x 43.8cm x 30.4cm
(1.75” x 17.3” x 12”)
Weight 4.61kg
(10.15lbs.)
System Capacity
64MB RAM
16MB flash memory
200MHz PowerPC CPU
4096 VLANs
16000 MAC addresses
Performance
Wirespeed switching on all Ethernet ports
14,880pps for 10Mbps Ethernet
148,800pps for 100Mbps Ethernet
1,488,000pps for 1000Mbps Ethernet
Ethernet throughput 71.242Mpps
Switch fabric 96Gbps
Power Characteristics
Voltage: 100-240V AC
Current: 4.0/2.0A
Frequency: 50-60Hz
Max power consumption: 120 Watts
Environmental Specifications
Operating temperature: 0ºC to 40ºC
(32ºF to 104ºF)
Storage temperature: -20ºC to 70ºC
(-13ºF to 158ºF)
Operating humidity: 5% to 90% non-condensing
Storage humidity: 5% to 95% non-condensing
Max operating altitude: 3,048m (10,000 ft)
Recommended ventilation
on all sides: 10cm (4”)
MTBF 250,000 hrs.
Electrical/Mechanical Approvals
Safety UL 60950-1, CSA C22.2 No. 60950-1-03,
EN60950-1, EN60825-2 (TUV)
EMI FCC Part 15 Class A, EN55022 Class A, EN55024
Immunity, VCCI Class A, C-TICK, EN61000-3-2,
EN61000-3-3, AS/NZS 3548 (Australia/New Zealand)
Immunity EN55024
Countryof Origin
Singapore
Software Specifications
Layer 3 Support
RIPv1
RIPv2
ECMP
Static IPv4 routing (1024 routes)
Interface Standards
IEEE 802.3 10T and 10FL
IEEE 802.3u 100TX and 100FX
IEEE 802.3z 1000SX
IEEE 802.3ab 1000T
General Standards
IEEE 802.1d Bridging
IEEE 802.3ac VLAN tag frame extension
IEEE 802.3x BackPressure/ flow control
Redundancy
Static and dynamic port trunking (with six trunk
groups and up to eight ports per trunk)
IEEE 802.3ad 32 LACP link aggregation1
IEEE 802.1D Spanning-Tree Protocol
IEEE 802.1w Rapid Spanning-Tree
IEEE 802.1s Multiple Spanning-Tree
BPDU guard1
Loop guard1
Router Redundancy Protocol (RRP) snooping
Dual software images, dual configuration files
Traffic Management and Quality
of Services (QoS)
Layer 2, 3 and 4 criteria
Flow groups, traffic classes and policies
DSCP replacement
IEEE 802.1Q priority replacement
Type of Service replacement
Type of Service to IEEE 802.1Q priority replacement
IEEE 802.1Q priority to Type of Service replacement
Maximum bandwidth control
Burst size control
Ingress rate limiting
Head of line blocking prevention
Supportfor ingress and egress ports
Eight egress queues per port
IEEE 802.1p Class of Service with Strict and Weighted
Round Robin Scheduling
Multicast
RFC 1112 IGMP snooping (v1)
RFC 2236 IGMP snooping (v2)
RFC 2710 Multicast Listener Discovery
(MLD) snooping (v1)
RFC 3810 Multicast Listener Discovery
(MLD) snooping (v2)
IGMP snooping querier1
Management and Monitoring
RFC 1157 SNMPv1
RFC 1901 SNMPv2
RFC 3411 SNMPv3
RFC 1213 MIB-II
RFC 1215 TRAP MIB
RFC 1493 Bridge MIB
RFC 2863 Interfaces group MIB
RFC 1643 Ethernet-like MIB
RFC 1757 RMON 4 groups: Stats,
History, Alarms and Events
RFC 2674 IEEE 802.1Q MIB
RFC 1866 HTML
RFC 2068 HTTP
RFC 2616 HTTPS
RFC 854 Telnet server
RFC 1350 TFTP client
AlliedTelesis Private MIB
IP address allocation:
RFC 951 / RFC 1542 BOOTP client
RFC 2131 DHCP client manual
RFC 2030 SNTP, Simple Network
Time Protocol
BootP/DHCP relay
Group link control1
Link flap protection1
Syslog client
Two event logs:
4,000 event capacity in temporary memory
2,000 event capacity in permanent memory
Management Access Methods
Out of band management (serial port)
In-band management (over the network) using Telnet,
web browser or SNMP
Enhanced Stacking
Management Interfaces
Menus
AlliedWare PlusTM CLI
Multiple management sessions
(up to three administrators)
Command line
Web browser
SNMP v1/ v2/ v3

USA Headquarters |19800 North Creek Parkway |Suite 100 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 Tai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2009 AlliedTelesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000206 Rev. G
AT-9448T/SP | 48 Port 10/100/1000T Managed Layer 3 Switch with 4 Combo SFP Bays
AT-9448T/SP-xx
Layer 3 switch with 48 ports 10/100/1000T
plus 4 combo SFP bays
Where xx = 10 for U.S. power cord
20 for no power cord
30 for U.K. power cord
40 for Australian power cord
50 for European power cord
Accessories
Small Form Pluggables (SFPs)
AT-SPSX
Multi-mode fiber, GbE SFP, 850nm
AT-SPLX10
Single-mode fiber, 10km, GbE SFP, 1310nm
AT-SPLX40
Single-mode fiber, 40km, GbE SFP, 1310nm
AT-SPLX40/1550
Single-mode fiber, 40km, GbE SFP, 1550nm
AT-SPZX80
Single-mode fiber, 80km, GbE SFP, 1550nm
Redundant Power Supply
AT-RPS3204
Chassis for up to four redundant power supplies
(chassis includes one power supply and one cable)
AT-PWR3202
Additional 200W redundant power supply with cable
Security
RFC 1492 TACACS+
RFC 2865 RADIUS client
RFC 2866 RADIUS accounting
IEEE 802.1x Port-based Network Access Control
with multiple supplicants per port
ingress and egress control of
broadcast, multicast and unknown
unicast traffic
MAC address security/lockdown
Layer 2/3/4/ Access Control Lists (ACLs)
64 ACL profiles
256 rules per ACL profile
ACLs based on:
•Ethernet frame type
•MAC address/VLAN ID/IEEE 802.1p
•Layer 2/3 protocol
•IP subnet/address/TOS/DSCP
•UDP/TCP port/flag
SSHv2 for Telnet mgmt
SSLv3 for Web mgmt
DoS attack protection
Smurf
SYN flood
Teardrop
Land
IP option
Ping of Death
SNMP attack
Microsoft NAP compliant
Symantec NAC support
Fault Protection
Bad cable detection
Broadcast storm control
1New features supported in AT-S63 v4.1.0.