Allied Telesis AT-9006SX/SC User manual

AT-9006SX/SC
AT-9006LX/SC
Gigabit Ethernet Switch
Quick Install Guide
PN 613-10853-00 Rev B

Copyright  2000 Allied Telesyn International, Corp.
960 Stewart Drive Suite B, Sunnyvale CA 94086, USA
All rights reserved. No part of this publication may be reproduced without prior written permission
from Allied Telesyn International, Corp.
Ethernet is a registered trademark of Xerox Corporation. All other product names, company names,
logos or other designations mentioned herein are trademarks or registered trademarks of their
respective owners.
Allied Telesyn International, Corp. reserves the right to make changes in specifications and other
information contained in this document without prior written notice. The information provided
herein is subject to change without notice. In no event shall Allied Telesyn International, Corp. be
liable for any incidental, special, indirect, or consequential damages whatsoever, including but not
limited to lost profits, arising out of or related to this manual or the information contained herein,
even if Allied Telesyn International, Corp. has been advised of, known, or should have known, the
possibility of such damages.

iii
Electrical Safety and Emission Compliance
Statement
Standards: This product meets the following standards.
RFI Emission EN55022 Class A !1
WARNING: In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures. !2
Immunity EN50082-1 1997 !3
Electrical Safety TUV-EN60950, UL1950, CSA 950 !4
Laser EN60825 !5
Important: Appendix A contains translated safety statements for installing this equipment. When you see
the !, go to Appendix A for the translated safety statement in your language.
Wichtig: Anhang A enthält übersetzte Sicherheitshinweise für die Installation dieses Geräts. Wenn Sie !
sehen, schlagen Sie in Anhang A den übersetzten Sicherheitshinweis in Ihrer Sprache nach.
Vigtigt: Tillæg A indeholder oversatte sikkerhedsadvarsler, der vedrører installation af dette udstyr. Når
De ser symbolet !, skal De slå op i tillæg A og finde de oversatte sikkerhedsadvarsler i Deres eget sprog.
Belangrijk: Appendix A bevat vertaalde veiligheidsopmerkingen voor het installeren van deze apparatuur.
Wanneer u de !ziet, raadpleeg Appendix A voor vertaalde veiligheidsinstructies in uw taal.
Important: L'annexe A contient les instructions de sécurité relatives à l'installation de cet équipement.
Lorsque vous voyez le symbole !, reportez-vous à l'annexe A pour consulter la traduction de ces
instructions dans votre langue.
Tärkeää: Liite A sisältää tämän laitteen asentamiseen liittyvät käännetyt turvaohjeet. Kun näet !-
symbolin, katso käännettyä turvaohjetta liitteestä A.
Importante: l’Appendice A contiene avvisi di sicurezza tradotti per l’installazione di questa apparecchiatura.
Il simbolo !, indica di consultare l’Appendice A per l’avviso di sicurezza nella propria lingua.
Viktig: Tillegg A inneholder oversatt sikkerhetsinformasjon for installering av dette utstyret. Når du ser
!, åpner du til Tillegg A for å finne den oversatte sikkerhetsinformasjonen på ønsket språk.
Importante: O Anexo A contém advertências de segurança traduzidas para instalar este equipamento.
Quando vir o símbolo !, leia a advertência de segurança traduzida no seu idioma no Anexo A.
Importante: El Apéndice A contiene mensajes de seguridad traducidos para la instalación de este equipo.
Cuando vea el símbolo !, vaya al Apéndice A para ver el mensaje de seguridad traducido a su idioma.
Obs! Bilaga A innehåller översatta säkerhetsmeddelanden avseende installationen av denna utrustning.
När du ser !, skall du gå till Bilaga A för att läsa det översatta säkerhetsmeddelandet på ditt språk.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with this instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can void
your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.

v
Table of Contents
Electrical Safety and Emission Compliance Statement .......................iii
Welcome to Allied Telesyn .......................................................................... vii
Where to Find Web-based Guides ................................................................... vii
Document Conventions ................................................................................... viii
Contacting Allied Telesyn............................................................................... viii
Online........................................................................................................ viii
For Technical Support and Services........................................................ viii
Technical Support -mail Addresses ........................................................ ix
Returning Products ........................................................................................... ix
FTP Server.......................................................................................................... x
For Sales or Corporate Information .................................................................. x
Tell Us What You Think .................................................................................... x
AT-9006 Gigabit Ethernet Switch................................................................ 1
Installing the Switch .......................................................................................... 2
Verifying the Package Contents ................................................................. 2
Reviewing Safety Guidelines ...................................................................... 3
Installing the Switch On a Desktop ........................................................... 4
Installing the Switch in a Rack .................................................................. 6
Setting Up for Local Management ............................................................. 8
Warranty Registration ....................................................................................... 8
Switch L Ds ....................................................................................................... 9
AT-S26 Software Default Setting .................................................................... 10
R.P.S. Input Connector Specifications............................................................. 11
Technical Specifications ................................................................................... 12
Appendi A
Translated Electrical Safety Emission Information............................. 13
Appendi B
Technical Support Fa Order .................................................................... 25
Incident Summary............................................................................................ 25
Appendi C
AT-9006 Quick Install Guide Feedback.................................................... 27

vii
The guide contains instructions on how to install the AT-9006SX/SC and
AT-9006LX/SC Gigabit thernet Switches.
Where to Find Web-based Guides
The Allied Telesyn web site at www.alliedtelesyn.com provides you with an
easy way to access the most recent documentation and technical information
for all of our products. For product guides, you can go directly to the following
web page: www.alliedtelesyn.com/support/lib_allproducts.htm.
The following guides relate to the installation and management of the
AT-9006 switch product and are available from the web site:
❑AT-9006SX/SC and AT-9006LX/SC Installation Guide (at10851.pdf)
❑AT-S26 User’s Guide (at10852.pdf)
❑AT-RPS8000 Quick Install Guide (at10816.pdf)
Welcome to Allied Telesyn

viii
Document Conventions
This guide uses several conventions that you should become familiar with first
before you begin to install the product.
Note
A note provides additional information.
Caution
A caution indicates that performing or omitting a specific action may
result in equipment damage or loss of data.
Warning
A warning indicates that performing or omitting a specific action may
result in bodily injury.
Contacting Allied Telesyn
There are several ways that you can contact Allied Telesyn technical support:
online, telephone, fax, or e-mail.
Online
You can request technical support online by filling out the Tech-Assistant
Form at www.alliedtelesyn.com/support.htm.
For Technical Support and Services
Americas
United States, Canada, Mexico,
Central America, South America
Tel: [phone], option 4
Fax: [phone]
Germany
Germany, Switzerland, Austria, astern
urope
Tel: [phone]
Fax: [phone]
Asia
Singapore, Taiwan, Thailand, Malaysia,
Indonesia, Korea, Philippines, China,
India, Hong Kong
Tel: [phone]
Fax: [phone]
Italy
Italy, Spain, Portugal, Greece, Turkey,
Israel
Tel: [phone]
Fax: [phone]

AT-9006 Quick Install Guide
ix
Technical Support E-mail Addresses
United States and Canada
[e-mail]
Latin America, Mexico, Puerto Rico, Caribbean, and Virgin Islands
[e-mail]
United Kingdom, Sweden, Norway, Denmark, and Finland
[e-mail]
Returning Products
Products for return or repair must first be assigned a Return Materials
Authorization (RMA) number. A product sent to Allied Telesyn without a
RMA number will be returned to the sender at the sender’s expense.
To obtain an RMA number, contact Allied Telesyn’s Technical Support at one
of the following locations:
Australia
Tel: [phone]
Fax: [phone]
Japan
Tel: [phone]
Fax: [phone]
France
France, Belgium, Luxembourg,
The Netherlands, Middle ast, Africa
Tel: [phone]
Fax: [phone]
United Kingdom
United Kingdom, Denmark, Norway,
Sweden, Finland
Tel: [phone]
Fax: [phone]
North America
2205 Ringwood Ave
San Jose, CA 95131
Tel: [phone], option 4
Fax: [phone]
European Customer Support Centre
10/11 Bridgemead Close
Westmead Industrial state
Swindon, Wiltshire SN5 7YT
ngland
Tel: [phone]
Fax: [phone]
Latin America, the Caribbean,
Virgin Islands
Tel: international code + 425-481-3852
Fax: international code + 425-483-9458
Me ico and Puerto Rico
Tel: [phone], ext 3852 or
1-800-424-4284, ext 3852
Mexico only:95-800-424-5012, ext 3852
Fax: international code + 425-489-9191

x
FTP Server
If you need a driver for an Allied Telesyn device and you know the name of the
driver, you can download it by connecting directly to our FTP server at
ftp://gateway.centre.com.
At login, enter ‘anonymous’. nter your e-mail address for the password as
requested by the server at login.
For Sales or Corporate Information
Tell Us What You Think
If you have any comments or suggestions on how we might improve this or
other documents, fill out the “AT-9006 Quick Install Guide Feedback” on page
27 and return the form to us at the address or fax number provided. You can
also provide feedback online by filling out the Feedback on Documentation
form at www.alliedtelesyn.com/forms/feedbackman.htm.
Allied Telesyn International, Corp.
19800 North Creek Parkway, Suite 200
Bothell, WA 98011
Tel: [phone]
Fax: [phone]
Allied Telesyn International, Corp.
960 Stewart Drive, Suite B
Sunnyvale, CA 94086
Tel: [phone] (USA and Canada)
Fax: [phone]