Allnet ALL95102O User manual

ALL95102O
Outdoor Surge Arrester
For 10/100/1000Mbit Ethernet + PoE
Quick Installation Guide

Safety instructions for the installation
- ALL95102O is just for network interface cards, hubs, switches
and other network equipment.
- Never install the ALL95102O during an electric storm!
- Disconnect all devices from the ALL95102O before installing.
- ALL95102O must be connected to ground.
- To prevent electrical shock while installing the ground wire to the
electrical power outlet ground, disconnect electricity to the outlet.
From the electrical panel, switch off the appropriate circuit breaker
or remove the fuse.

Installation
1. Power off the device that should be connected to the
ALL95102O.
2. Disconnect the network cable from the device.
3. Connect the network cable with one port of the ALL95102O.
4. Connect one end of another network cable with the second port
of the ALL95102O.
5. Connect the other end of this network cable to the device.
6. Connect the yellow-green ground wire with an external
grounding conductor.
ALL95102O
Grounding conductor
Network cable
Network cable