Alpha scooters Stealth carbon gen iii User manual

Carbon Fibre Electric Scooter

Stealth Carbon Gen III

User Manual

[Revision 3.0 November 2019]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description and packaging.

Please note that there must be forward momentum for the motor to activate.

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

•Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

•Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

•Keep clear of moving parts.

•Equipment may be a potential source of

electric shock or injury if misused.

•Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

•Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

•Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

•Work areas should be clean and well it.

•Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

•If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

•Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

•Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

•Do not use the equipment if tired or under

the influence of drugs, alcohol or

medication.

•This equipment is not intended for use by

persons with reduced physical, sensory or

mental capabilities.

General Fuel Safety

•Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

•Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

•Do NOT smoke near fuel or when

refuelling.

•Always shut off the engine before

refuelling.

•Do NOT refuel a hot engine.

•Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

•Always refuel in well ventilated areas.

•Always check for fuel leakage. If fuel

leakage is found, do not start or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

•Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

•Use combustion engines OUTSIDE only,

and far away from windows, doors and

vents.

General Equipment Use and Care

•The equipment is designed for domestic

use only.

•Handle the equipment safely and carefully.

•Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

•Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

•Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

•Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

•Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

•Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases or liquids etc.

•The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

•Do not clean equipment with solvents,

flammable liquids or harsh abrasives.

•For specific equipment safety use and care,

see Equipment Safety.

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

General Electrical Safety

•Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

•Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

•When wiring electrically powered

equipment, follow all electrical and safety

codes.

•Wherever possible, use a residual current

device (RCD).

•High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

•Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

•Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

•Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

•Do NOT use electrical equipment in wet

conditions or in damp locations.

•Do NOT use electrical cords to lift, move or

carry equipment.

•Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

•The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

•Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

•Do NOT attempt any maintenance or repair

work not described in this manual.

•After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories or performing repair or

maintenance.

•Do NOT adjust while the equipment is

running.

•Perform service related activities in suitable

conditions, such as a workshop.

•Replace worn, damaged or missing

warning/safety labels immediately.

Electric Scooter Safety

Riding can be a hazardous activity. Certain conditions may cause the equipment to fail without fault of the manufacturer. The product can and is

intended to move, and it is therefore possible to lose control, fall-off and/or get into dangerous situations that no amount of care, instruction or

expertise can eliminate. If such things occur, you can be seriously injured or die, even when using safety equipment and other precautions. RIDE

AT YOUR OWN RISK AND USE COMMON-SENSE. FAILURE TO USE COMMON-SENSE AND HEED ALL SAFETY WARNINGS AND

RECOMMENDATIONS INCREASES RISK OF INJURY. USE THE PRODUCT ONLY WITH APPROPRIATE CAUTION AND SERIOUS

ATTENTION TO SAFE OPERATION.

Appropriate Rider Use and Parental Supervision

•The recommended minimum rider age of 8 years is an estimate only, and can be affected by the rider’s size, weight or skills. Any rider unable to

adequately understand the controls or techniques required to ride the product should not attempt to ride it. A parent’s decision to allow his or her

child to ride this product should be based on the child’s maturity, skill and ability to follow rules.

•DO NOT EXCEED THE WEIGHT LIMIT OF 120KGS. Rider weight does not necessarily mean a person’s size is appropriate to fit or maintain

control of the product, moreover the ability of the product to safely support the loads placed on it due to rider weight.

Acceptable Riding Practices and Conditions

•Always check and obey any local laws or regulations which may affect the locations where the product may be used. Ride defensively. Watch out

for potential obstacles that could catch the wheels or force you to swerve suddenly or lose control. Avoid pedestrians etc who may enter your

path and respect the rights and property of others.

•The product is meant to be used on private property and on closed courses and not on public streets or pavements. Do not ride in any areas

where pedestrian or vehicle traffic is present.

•Do not activate the product unless you are in a suitable environment for safe riding.

•The product is not for indoor use.

•This product was manufactured for performance and durability but are not impervious to damage. Stunts or other aggressive riding can over-

stress and damage the product, and the rider assumes all risks associated with how the product is looked after.

•Be careful and know your limitations. Risk of injury increases as the degree of riding difficulty increases. The rider assumes all risk associated

with aggressive riding activity.

•Maintain a hold on the handlebars at all times.

•Never carry passengers or allow more than one person at a time to ride the product.

•Never use near steps, drops or bodies of water, such as swimming pools.

•Keep your fingers and other body parts away from the wheels and all other moving components.

•Never use headphones or a phone when riding.

•Never hitch the product to another vehicle or person.

•Do not ride the product in rain or wet conditions and never immerse the product in water – electrical components may be damaged by water or

create other possible unsafe conditions.

•Bumpy, slippery, uneven or rough surfaces may increase risks.

•Do not touch the brakes or electric motor when in use and/or immediately after riding as they can become very hot.

•Do not ride at night or when visibility is limited.

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Proper Riding Attire

•Always wear proper protective equipment, such as an approved safety helmet (with chin strap securely buckled), elbow and knee pads. A helmet

may be legally required by local law or regulation in your area. A long-sleeved shirt, long pants and gloves are recommended. Always wear

closed shoes (preferably lace-up shoes with rubber soles), never ride barefoot or in sandals or thongs, and keep shoelaces tied and out of the

way of the wheels, motor and drive system.

Battery and Charging

•The supplied charger should be regularly examined for damage to the electrical cord, plug, enclosure and other parts. If any damage or

malfunction occurs, do NOT use the charger again until it has been repaired or replaced.

•Use only with the recommended charger.

•Use caution when charging.

•The charger is not a toy and should be operated by adults only.

•Do not operate the charger near flammable materials.

•Do not clean or perform any maintenance on the product when it is being charged.

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Table of Contents

Safety ......................................................................................................................................................... 2

Safety Symbols...........................................................................................................................................................5

Parts Identification .................................................................................................................................... 8

Assembly ................................................................................................................................................... 9

Accessories ................................................................................................................................................................9

Left and Right Handles ...............................................................................................................................................9

Brake ........................................................................................................................................................................10

Accelerator................................................................................................................................................................10

Operation ................................................................................................................................................. 11

Control Panel ............................................................................................................................................................11

Connecting the Charger ...........................................................................................................................................12

Unfolding the Scooter ...............................................................................................................................................13

Folding the Scooter...................................................................................................................................................13

Maintenance............................................................................................................................................. 14

Cleaning and Storage ...............................................................................................................................................14

Battery Maintenance.................................................................................................................................................14

Troubleshooting ...................................................................................................................................... 15

Specifications .......................................................................................................................................... 16

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Parts Identification

No. Name No. Name No. Name

1

Display

14

Screw

27

Screw

2

Screws

15

Motor cover

28

Slide block

3

Front light

16

Wheel fork

29

Motor cover

4 Accelerator 17 Motor 30 Fold axis

5 Tube body 18 Kickstand 31 Screw

6 Handlebar tube 19 Handlebar grip 32 Mud cap

7 Handlebar grip 20 Handlebar tube 33 Rear wheel axis

8

Battery

21

Brake

34

Fixer

9

Slide lock

22

Gland

35

Anti-skid pad

10

Dirt-proof boot

23

Top connector

36

Rear wheel

11 Gasket 24 Charging mouth 37 Pedal

12 Screw 25 Slide lock

13 Nether connector 26 Controller

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Assembly

Accessories

Left and Right Handles

1. Insert the left handle into the socket and rotate it in an anti-clockwise direction until it’s tight and secure.

2. Insert the right handle into the socket and rotate it in a clockwise direction until it’s tight and secure.

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Brake

Adjust the tightness of the brake with the M4 screwdriver.

Accelerator

Adjust the accelerator with the M4 screwdriver.

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Operation

ATTENTION: Monitor battery usage when in use, the scooter may suddenly slow down as the

battery charge reduces.

Control Panel

Turn ON

Press the function button for about a second to turn ON the scooter.

Turn OFF

Press the function button for about a second to turn OFF the scooter.

Switching Gears

Press the function button to cycle speeds 1, 2 or 3.

Switching Function Indicators

Press the function button 2x to select your preferred function indicator (DIS, V, or ODO).

Front Light

Press the function button 3x to turn ON the front light. Press it again 3x to turn OFF the front light.

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Working Indicators

Brake signal

Accelerator signal

Constant speed switch

Cruise control

Failure Indicator

If one or several scooter components fail or malfunction, the control panel will show which component is

malfunctioning.

Brake failure

Controller failure

Motor failure

Throttle failure

Connecting the Charger

NOTE: please plug the charger correctly.

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Unfolding the Scooter

1. Position the scooter body in an upright, standing position and press the folding switch, as shown below.

2. Lower down the scooter footboard.

3. Unfolding is complete once you hear a ‘click’ sound.

Folding the Scooter

1. Press the folding switch, as shown below. If it is tight, please push the battery tube forward a little and then

press the folding switch.

2. Fold down the steering pole.

3. Folding is complete once you hear a ‘click’ sound.

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Maintenance

Cleaning and Storage

•If stains appear on the surface of the scooter, wipe with a soft wet cloth. For stubborn stains, you can wipe

Clean the scooter using a soft dry cloth only.

•Do NOT use chemicals, solvents, abrasives or any form of liquid to clean the scooter as this may damage

the electronics or surface finishes.

•Store the scooter indoors in a cool, dry place. It is recommended to keep the scooter covered when not in

use.

•Store at temperatures between -23°C (-10°F) and 45°C (113°F). Avoid storage areas that are subject to

large temperature variations.

•When storing for extended periods, discharge and recharge the batteries every 3 months.

Battery Maintenance

•Never modify the electrical system. Alterations could cause a fire resulting in serious injury and could also

damage the electrical system.

•Charge with the supplied or recommended charger only. Use of the wrong charger could cause a fire or

explosion resulting in serious injury.

•Battery charging must be performed by adults only. Never allow children to charge the battery.

•Ensure the voltage and frequency of the charger is compatible with mains electrical supply.

•Use the battery charger in dry locations only.

•The battery must be charged before first use.

NOTE: A fully-charged battery will run out of stored power after 90 – 120 days in standby mode. Stored power

will run out after 20 – 50 days in standby mode if the battery is not fully charged. if you don't charge the battery in

time, it may cause damage to the battery due to excessive discharge; this damage is irreversible. Any battery

damage caused by failure to charge in a timely manner will result in a failure to charge in the future and can

become irreparable. This will also void the warranty coverage.

Non-professionals should not be allowed to open the battery, otherwise it can potentially cause grave accidents

via electric shocks or short circuiting.

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Troubleshooting

Malfunction Possible Cause Possible Solution

Scooter not running or was

running but suddenly stopped

Under-charged battery.

Dead battery.

Battery charger not working.

Motor electrics or switches

damaged / faulty.

Charge the battery and ensure battery

charging and care procedures are followed.

Vehicle battery no longer holding charge or

serviceable. Have battery checked by

authorised service centre.

Have charger professionally checked. If not

working – replace.

Seek diagnosis and repair from authorised

service centre.

Short run time Under-charged battery. Charge the battery and ensure battery charging

and care procedures are followed.

Scooter runs sluggishly. Unsuitable riding conditions.

Vehicle being overloaded or used on unsuitable

surfaces. Unload vehicle (120kg max.) and/or

use on suitable surface.

Scooter turns on and off

intermittently.

Main body electrics or switches

damaged / faulty.

Seek diagnosis and repair from authorised

service centre.

Taillight not illuminating Battery requires charging Charge the taillight battery.

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

Carbon Fiber Electric Scooter - Stealth Carbon Gen III

Specifications

Power 300W

Current 10.4Ah

Battery Voltage 30V

Input Voltage 240V AC

Max Speed 25km/h

Max Range 27km

Display Colour Backlit LED

Approvals UL, CE, RoHS

Colour Black

Tyre Size 6.5 inches

Max Load 120kg

Min. Recommended Age 7

Power Plug Australian Standard

Note: This product is intended for use on safe, dry, smoothly paved or hard surfaces. We strongly recommend

the use of safety equipment. Refer to local regulations regarding where electric scooters are permitted to be

used.

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS ALPHA SCOOTERS

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety

Consult all documentation, packaging

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.

Before each use, check the product for

loose/broken/damaged/missing parts,

wear or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear or leaks.

Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.

Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.

The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.

This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business

or employee, or financially affect the user, business or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement or service by a technician

may cause financial loss, loss of employee time or an

inconvenience requiring compensation.

If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Alpha Scooters Stealth Carbon Gen III User manual

Popular Scooter manuals by other brands