RC RECEIVER p006 2
ALPHA SUPPORT PHONE (909) 307-2320
Single Motor Receiver
Way B
Way C
Press the receiver’s learning button until the motor vibrates twice.
The code is deleted and no can control this motor.remotes
If the motor is in vibration state, press ’s UP or DOWN button for 3 seconds, the motor will run continuously.remote
Press the STOP button, the motor will change into vibration state.
A wall switch can be connected to the receiver to control the tubular motor. The manual switch is to connect Door Bell Switch.
With manual switch, the tubular motor can achieve UP-STOP-DOWN-STOP-UP sequence.
6. DIRECTION CHANGE
7. SET STEP BY STEP FUNCTION
8. DELETE STEP BY STEP FUNCTION
9. WALL SWITCH
ANNOUNCEMENT
Press remote’s UP and
DOWN buttons once
simultaneously.
Press remote’s UP and
DOWN buttons once.
Press remote’s UP and
DOWN buttons once.
Press remote’s UP and
DOWN buttons once.
Press remote’s STOP
button 7 times.
Press remote’s STOP
button 6 times.
Press remote’s STOP
button once.
Press remote’s STOP
button once.
The remote you are operating
is deleted and cannot control
the motor.
The motor’s running
direction is changed.
The motor will run
step by step.
The motor will run
continuously.
Press remote’s UP button,
the motor vibrates once.
Press remote’s DOWN button
once, the motor vibrates.
Press remote’s UP button
once, the motor vibrates once.
Press remote’s DOWN button
once, the motor vibrates once.
The setting may fail due to other signal interference. In this case, please reset.
The RE101 is taken as an example in this instruction. The receiver is compatible with other rolling codes s also.remote remote
If ’s battery is in low power, please replace it.remote
The receiver is of high voltage, please do not place it in humid conditions.
Children should be supervised to ensure that they do not play with the appliance.
Working temperature: -10℃℃.to +55
All products are as per real subjects. There will be no prior notification if any change in appearance, color, functions etc.
