Alpha RC201 User manual

RC201 WALL RECEIVER p1SWITCH
1. TECHNICAL SPECIFICATIONS
2. PRODUCT APPEARANCE
3. CODE LEARNING
4. COPY Note: B can control the tubular motor after it learns code from Aremote remote
1
2
3
4
5
1
2
3
4
5
Wa Ay
Way B
AowerC P 1
1
11
1
11
1
18
1
11
BBAA
Remote RE 011 Re eiver RC201cRC20 ires connection1 w
1 Tubular Motor Down/Up (Brown/Black):
2 Tubula Motor Up/Down (Black/Brown):r
3 Tubula Motor Neutral Line (Blue):r
4 220 AC Power N wire (Blue):V
5 220V AC Power L wire (Brown):
UP
STOP
DOWN
LIGHT
Learning
Button
LIGHT
UP
STOP
DOWN
AowerC P
AowerC P
Brown
Brown /L
Blue /N
Black
Blue
Ground
Powe n, the motorr o
wil ibrate once.l v
Pres ’s UP and DOWNs remote
button imultaneously.s s
Pres ’s STOP buttons remote
once he motor will vibrate., t
Cod earning is successful,e l
yo an control the motor byu c
th .e remote
Connec the tubular motort
an the receiver.d
Long press the OP buttonreceiver's ST
for 3 till the tubular motors vibrates.
Pres ’s UP and DOWNs remote
button imultaneously.s s
Pres ’s STOP buttons remote
once he motor will vibrate., t
Pres he UP and DOWNs t
buttons of remote A
si ultaneously.m
Pres he STOP button ofs t
remote A eight times, the
moto ill vibrate.r w
Pres he UP and DOWNs t
button f Bs o remote
si ultaneously.m
Pres he STOP button of Bs t remote
once he motor will vibrate again. Now, t
remote B can control the motor as well.
Brown
Brown /L
Blue /N
Black
Blue
Power: AC 0V( 0Hz) Rated: ≤400W24 5
The receiver will cut the power after working for 4mins continuously
The receiver can be controlled by 15 s at mostremote
The receiver's UP/STOP/DOWN buttons can also control the motor
ALPHA SUPPORT PHONE [phone]

RC201 WALL RECEIVER p2SWITCH
5. CODE DELETING
6. DIRECTION CHANGE
7. SET STEP BY STEP FUNCTION
8. DELETE STEP BY STEP FUNCTION
Wa By
1
1
11
1
1
1
1
Wa Ay
61
1
1
7
1
6
1
1
1
1
1
Pres ’s UP buttons remote
once he motor vibrates once., t
Pres 's UP and DOWNs remote
button imultaneously.s s
Pres ’s STOPs remote
butto ix times.n s
Al he s that have alreadyl t remote
learne he motor's code won'td t
contro he motor any more.l t
Pres ’s UP buttons remote
once he motor vibrates once., t
Pres 's UP and DOWNs remote
button imultaneously.s s
Pres ’s STOPs remote
button seven times.
Thi you are operating nows remote
won' ontrol the motor any more.t c
Pres ’s DOWN buttons remote
once he motor vibrates once., t
Pres ’s UP and DOWNs remote
button imultaneously.s s
Pres ’s STOPs remote
butto ix times.n s
Th otor's runninge m
directio s changed.n i
Note: All the will not control this moto nless you cut off the power and do code learning again.remotes r, u
Pres 's UP and DOWNs remote
button imultaneously.s s
Pres ’s STOPs remote
butto nce.n o
Pres ’s UP button once,s remote
th otor vibrates once.e m
Th otor will rune m
ste y step.p b
Pres ’s UP and DOWNs remote
button imultaneously.s s
Pres ’s STOPs remote
butto nce.n o
Pres ’s DOWN buttons remote
once he motor vibrates once., t
Th otor will rune m
co tinuously.n
!Announcement
Setting may fail due to the of signal. If in this case, please reset.interference
remote remotesThe RE101 is taken as an example in this The receiver is compatible with several other rolling code .instruction.
sPlease do not press buttons for too long in case life span of battery declines. Pressing time should be at 0.5 , interval be 1 second. If thetime should
battery is in low power, please battery.replace
The control unit is of high voltage. Please do not place it in humid atmosphere.
Children should be to ensure that they do not play with the appliance.supervised
to +55Ambient temperature: -10℃℃.
All products are as per material subjects if there is change in appearance, color, function etc. This information is subject to changes without prior notice.
ALPHA SUPPORT PHONE [phone]