Alpha RC008 User manual

RC RECEIVER p1008
ALPHA SUPPORT PHONE [phone]
1
1
AB
1
B
AB
8
1
1
1
learning button
White Terminal: Connect Tubular Motor
Yellow Terminal : Connect AC Power
White
Yellow
Screw Hole
1. TECHNICAL SPECIFICATIONS
Power: AC 0V( 0Hz) Rated load: do not exceed 400 watts Protection Index: IP 4424 5
remotesThe receiver can be compatible with 15 at most.
The receiver will cut off electricity after working 4 minutes continuously.
2. WIRES CONNECT
3. CODE LEARNING
4. CODE DELETING
Wa Ay
Way B
Way C
Power on, the motor
will vibrate.
Switch on the power, press
receiver’s learning button,
the motor vibrates once.
Press UP and DOWN
buttons simultaneously.
Press remote’s UP and DOWN
buttons once simultaneously.
Press UP and DOWN
buttons simultaneously.
Press remote’s UP and DOWN
buttons simultaneously.
Press remote STOP’s
button 8 times within
10s, the motor will vibrate.
Press remote’s STOP
button 6 times within 10s.
You can control the motor
by the remote.
The motor can be controlled
by the .remote
Press remote’s STOP
button once within 10s,
the motor will vibrate.
You can control the
motor by remote B.
All remotes that have learned
motor’s code won’t control motor.
Press the STOP button
once within 10s, the motor
will vibrate.
Press ’s STOP buttonremote
once, the motor vibrates.
Press UP and DOWN
buttons simultaneously.
Press remote and DOWN’s UP
buttons simultaneously.
AC POWER
Note: No can control this tubular motor after code deleting unless you reset.remote
Way A

RC RECEIVER p2008
ALPHA SUPPORT PHONE [phone]
Way A
Delete the remote you are operating.
Press remote’s UP and DOWN
buttons once simultaneously.
Press remote’s UP and DOWN
buttons once.
Press remote’s UP and DOWN
buttons once.
Press remote’s UP and DOWN
buttons once.
If the motor is in vibration state, press remote’s UP or DOWN button for 3 seconds, the motor will run continuously.
Press the STOP button, the motor will change into vibration state.
Press receiver’s learning button for 3 seconds, the motor vibrates.
No remote can control this motor.
Press remote’s STOP
button times7.
Press remote’s STOP
button times6.
Press remote’s STOP
button once.
Press remote’s STOP
button once.
This remote now won’t control
the motor.
The motor’s running
direction is changed.
The motor will run
step by step.
The motor will run
continuously.
Press remote button,’s UP
the motor vibrates once.
Press remote DOWN button’s
once, the motor vibrates once.
Press remote UP button’s
once, the motor vibrates once.
Press remote DOWN button’s
once, the motor vibrates once.
7
Announcement
The setting may fail due to other signal interference. In this case, please reset.
The RE101 is taken as an example in this instruction. The receiver is compatible with several other fixed coderemote remotes.
If ’s battery is in low power, please replace it.remote
The receiver is of high voltage, please do not place it in humid atmosphere.
Children should be supervised to ensure that they do not play with the appliance.
Working temperature: 10°C +55 °C--
All products are as per real subjects.There will be no prior notification if any change in appearance, color, functions etc.
Direction Change
Set Step by Step Function
Delete Step by Step Function
RC 008 Instruction
5 DIRECTION CHANGE.
6 SET STEP BY STEP FUNCTION.
7 DELETE STEP BY STEP FUNCTION.
1
1
1
6
1
1
1
1
1
1
1
1