manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Alphacool
  6. •
  7. Computer Hardware
  8. •
  9. Alphacool NexXxoS GPX-N 770-M0 User manual

Alphacool NexXxoS GPX-N 770-M0 User manual

NexXxoS GPX-N 770-M02
Hinweise
1.
Überzeugen Sie sich bitte von der Funktion Ihrer Hardware, sowie des Kühlsystems (Dichtheit, Pumpenfunktion und Lüfter). Fall
den Aufwand bei der Suche möglicher Fehlerquellen. Alphacool übernimmt nicht die Garantie d
Montage des Kühlsystems erfolgt auf eigenes Risiko.
2.
Die Schrauben sollten nicht zu fest angezogen werden. Wenn Sie die Schrauben übermäßig fest angezogen haben, können sich die
gleichmäßige Auflage des Kühlers mehr gewährleistet.
3.
Wir empfehlen, keine Verwendung von Werkzeug, wie z.B. Schraubenschlüssel, zum Befestigen der Anschlüsse. bei Anschlüssen mit
Durchflussminimierung kommen.
4. Wir empfehlen einen Dichtigkeitstest vor Montage / Einbau des Kühlers.
5.
Überzeugen Sie sich, das der Kühler alle zu kühlenden Bauteile mit Wärmeleitpaste und Wärmeleitpad´s berührt. Im Bild ist es
aussehen muss.
Instructions
1.
If you have not done so yet, please check your hardware and cooling system (tightness, pump function andfans). This will mi
problems. Alphacool accepts no liability on the warranty of the manufacturer
risk.
2.
The screws should not be tightened toofirmly. If you tighten the screws excessively, the knurled nuts can loosen and the coo
guaranteed.
3.
Fasten the connections of your choice to the cooler. Do not use tools such as wrenches for fastening the connections. Connect
flow.
4.
We recommend a tightness test before assembling/installing the cooler. DO
5.
Convince yourself that the cooler touches all components to be cooled with thermal grease and thermal pad's. The picture show
like.
Indications
1. .Au cas où vous n´avez pas encore fait, s´il vous plait assurez-vous vous-
même de la fonction devotre hardware ainsi que du système de refroidissement (étanchéité,
fonction de la pompe et ventilateur). Vous réduisez ainsi la dépense de temps recherchent possible sources d´erreur. Alphacoo
des éléments et composantes électroniques. L'assemblage du système de refroidissement s´effectue avous risques et périls.
2. .
Les vis ne devraient pas être serrées trop fermement. Si vous avez serré les vis excessivement, l
uniformément alors son fonctionnement parfait ne peu plus être garanti.
3. .
Fixez les raccordements de votre choix au refroidisseur. Pour les connexions avec 8 mm filetée longueur peut
pas l´utilisation d’outil comme p. ex.des clefs, pour lafixation des raccordements.
4. .
Nous recommandons un essai d'étanchéité avant assemblage/installation du refroidisseur.
5. .Laissez-vous convaincre que les tou
ches fraîches tous les composants à refroidir avec de la graisse thermique et de tampon thermique. Sur la photo, il est montr
l'empreinte d'un GPU doit ressembler.
Schraubensatz
Screw set
Jeu de vis
7x
M3x12
1x
1
2
3
4
5
6
7
Überzeugen Sie sich bitte von der Funktion Ihrer Hardware, sowie des Kühlsystems (Dichtheit, Pumpenfunktion und Lüfter). Fall
s noch nicht erfolgt. Sie minimieren so
den Aufwand bei der Suche möglicher Fehlerquellen. Alphacool übernimmt nicht die Garantie d
es Herstellers der elektronischen Bauteile und Komponenten. Die
Die Schrauben sollten nicht zu fest angezogen werden. Wenn Sie die Schrauben übermäßig fest angezogen haben, können sich die
Haltebolzen lösen und es ist keine
Wir empfehlen, keine Verwendung von Werkzeug, wie z.B. Schraubenschlüssel, zum Befestigen der Anschlüsse. bei Anschlüssen mit
8 mm Gewindelänge kann es zur
Überzeugen Sie sich, das der Kühler alle zu kühlenden Bauteile mit Wärmeleitpaste und Wärmeleitpad´s berührt. Im Bild ist es
gezeigt wie der Abdruck einer GPU
If you have not done so yet, please check your hardware and cooling system (tightness, pump function andfans). This will mi
nimize time spent searching for possible
problems. Alphacool accepts no liability on the warranty of the manufacturer
of the electronic components. The assembly of the cooling system takes place at your own
The screws should not be tightened toofirmly. If you tighten the screws excessively, the knurled nuts can loosen and the coo
ler´s uniform pressure is no longer
Fasten the connections of your choice to the cooler. Do not use tools such as wrenches for fastening the connections. Connect
ors with 8mm long threads may stop the
We recommend a tightness test before assembling/installing the cooler. DO
NOT use tools on the connectors.
Convince yourself that the cooler touches all components to be cooled with thermal grease and thermal pad's. The picture show
s what the imprint of a GPU must look
même de la fonction devotre hardware ainsi que du système de refroidissement (étanchéité,
fonction de la pompe et ventilateur). Vous réduisez ainsi la dépense de temps recherchent possible sources d´erreur. Alphacoo
l ne prend pas de la garantie du fabricant
des éléments et composantes électroniques. L'assemblage du système de refroidissement s´effectue avous risques et périls.
Les vis ne devraient pas être serrées trop fermement. Si vous avez serré les vis excessivement, l
es vis peuvent se décaler et le refroidisseur ne reste plus positionné
Fixez les raccordements de votre choix au refroidisseur. Pour les connexions avec 8 mm filetée longueur peut
-être conduire à unflux moins. Nous ne recommandons
pas l´utilisation d’outil comme p. ex.des clefs, pour lafixation des raccordements.
Nous recommandons un essai d'étanchéité avant assemblage/installation du refroidisseur.
ches fraîches tous les composants à refroidir avec de la graisse thermique et de tampon thermique. Sur la photo, il est montr
é que
8x
15mm x 15mm x 1,5mm
2x
30mm x 30mm x 1,5mm
8x
15mm x 15mm x 3mm
Montage: Legen S
ie die Hardware auf eine antistatische Unterlage.
nach Aufbau des Kühlers sind zuerst die Schrauben des Lüfters zu entfernen und die Blenden zu lösen.
ist äußerste Sorgfalt geboten. Es können leicht Bauteile abgerissen werden.
S
ie anschließend die Hardware von Resten der Wärmeleitpaste oder Pad ‘s mit einem Lösemittel (z.B. Spiritus).
Assembly: Put
the hardware on an antistatic mat. Start with the dismantling of the original cooler.
the cooler remove the screws
at the back of the card and carefully unhook
extreme care should be taken. As you can easily damage parts
. Pick up all the items carefull
paste or pad residues with a solvent (eg alcohol ).
Assemblage : Insérez le matériel sur un tapis antistatique .
Commencez par le démantèlement du refroidisseur d'origine .
fonction de la structure du radiateur est de retirer lesvis de fixation du ventilateur pour retirer et régler l'ouverture. L
refroidisseurs collés soin extrême doit être exercé . Il peut facilement être déchiré parties . Ramassez tous les articl
. Ensuite, nettoyer lematériel de résidus de la pâte thermique ou de tampon avec un solvant (alcool ).
Tragen S
ie nun unter Zuhilfenahme eines Plastikstreifens oder ähnlichem
zu kühlenden GPU auf. Die Schicht sollte weniger als einen Millimeter dick sein, da sonst die umliegenden Bauteile unnötig
verunreinigt werden können.
With the help of a plastic strip or thermal pate spreader make
a
less than a millimeter thick
, otherwise the surrounding components can be contaminated unnecessar
Porter les maintenant à l'aide d'une bande de matière plastique ou analogue, une couche uniforme de pâte thermique à la GPU
à refroidir. La couche doit être inférieure à un millimètre d'épaisseur, faute de quoi les composants environnants peuvent êt
contaminés inutile.
Entfernen S
ie die Schutzfolie der rot dargestellten 15mm x 15mm x 1,5mm Wärmeleitpad ‘s und legen diese auf die
Speicherbausteine. Die rot dargestellten 30mm x 30mm x 1,5mm Wärmeleitpad für die Spannungswandler müssen
werden. Vergessen sie auch hier nicht die Schutzfolie zu entfernen.
Remove the protective film from the thermal pads and place them in the areas shown in red.
thermal pad's go on thememory chips. The 30mm x 30mm x 1
.5 mm
size. Do not forget also to remove the protective film on both sides!
Retirer le film protecteur de la rougemontre 15mm x 15mm x 1.5mm de tampon thermique et les mettre sur les puces d
mémoire.
Le rouge montre 30mm x 30mm x 1,5 mm pour le convertisseur de tension doit être coupé.
d'enlever le film de protection.
Montieren S
ie nun den zusammen gebauten Kühler auf die Grafikkarte wie im Bild zu sehen. Falls eine Schutzfolie auf dem
Kühlerboden vorhanden ist, entfernen S
ie bitte jetzt die Schutzfolie. Reinigen
mit Spiritus oder ähnlichen Mitteln.
Die Fläche muss frei von Verunreinigungen sein.
Place
the assembled cooler on the graphics card as in the picture. If
protective film now. Clean the contact surfaces on the
bottom side of the
contaminants.
Assemblez maintenant le refroidisseur monté sur la carte graphique comme dans l'image pour voir. Si un film protecteur sur le
sol plus frais existe, s'il vous pl
aît enlever le film protecteur maintenant. Nettoyer les surfaces de contact sur la face inférieure du
dispositif de refroidissement avec de l'alcool ou des moyens similaires.
Schneiden Sie die gelb dargestellten Wärmeleitpad 'sfür die Rückseite
Rückseite der Spannungswandler und der GPU gelegt.
Vergessen Sie auch hier nicht die Schutzfolie zu entfernen.
Cut the yellow thermal pad as shown in the picture.
These are placed on the rear side of the voltage converter and the GPU.
Do not forget to remove the protective film on both sides.
Couper à l'arrière comme sur la photo pour voir le pad thermique jaune montré 's. Ceu
convertisseur de tension et la GPU.
Ne pas oublier également d'enlever le film de protection.
Legen S
ie Backplate wie in dem Bild gezeigt auf die Grafikkarte. Ein leichter Druck sorgt für optimalen Kontakt zwi
Backplate, Kühler und Grafikkarte.
Put the backplate on as shown in the picture.
A slight pressure ensures optimal contact between the backplate cooler and
graphics card.
Mettez la plaque arrière comme montré sur la photo de la carte graphique. U
le refroidisseur de plaque arrière et la carte graphique.
Schrauben S
ie den Kühler zusammen. Die Schrauben dabei kreuzweise mit je eine
Beachten Sie dabei die Hinweise.
Drehen S
ie nach ca. 12 Stunden Benutzung der Grafikkarte nochmals alles Schrauben fest.
Screw the cooler together. Finger-
tighten the screws it with one turn. Pay attention to the pertinent instructions.
Tighten the screws after about 12 hours use of th
e graphics card.
Visser le radiateur. Serrer lesvis avec une seule tour. Faites attention aux instructions pertinentes.
Tournez après environ 12 heures d'utilisation de la carte graphique vis de tout nouveau fixes.
Anleitung - Instructions manual - Instructions de service

false

right
Kein Kontakt,
schlechter Abdruck.
No contact, bad
footprint.
Pas de contact,
mauvaise impression.
Guter Kontakt, Gut
verteilte Wärmeleitpaste
Good contact, good
distributed thermal paste.
Bon contact, la pâte
thermique bien distribué.
3x
30mm x 30mm x 3mm
1x
ie die Hardware auf eine antistatische Unterlage.
Beginnen Sie mit der Demontage des Original-Kühlers. Je
nach Aufbau des Kühlers sind zuerst die Schrauben des Lüfters zu entfernen und die Blenden zu lösen.
Bei aufgeklebten Kühlern
ist äußerste Sorgfalt geboten. Es können leicht Bauteile abgerissen werden.
Heben Sie alle Einzelteile sorgfältig auf. Reinigen
ie anschließend die Hardware von Resten der Wärmeleitpaste oder Pad ‘s mit einem Lösemittel (z.B. Spiritus).
the hardware on an antistatic mat. Start with the dismantling of the original cooler.
Depending on the structure of
at the back of the card and carefully unhook
the fan connector. If the original cooler uses thermal glue
. Pick up all the items carefull
y. Then clean the hardware of thermal
Commencez par le démantèlement du refroidisseur d'origine .
En
fonction de la structure du radiateur est de retirer lesvis de fixation du ventilateur pour retirer et régler l'ouverture. L
orsque
refroidisseurs collés soin extrême doit être exercé . Il peut facilement être déchiré parties . Ramassez tous les articl
es soigneusement
. Ensuite, nettoyer lematériel de résidus de la pâte thermique ou de tampon avec un solvant (alcool ).
ie nun unter Zuhilfenahme eines Plastikstreifens oder ähnlichem
, eine gleichmäßige Schicht Wärmeleitpaste auf die
zu kühlenden GPU auf. Die Schicht sollte weniger als einen Millimeter dick sein, da sonst die umliegenden Bauteile unnötig
a
thin layer of thermal paste on the GPU. The layer should be
, otherwise the surrounding components can be contaminated unnecessar
ily.
Porter les maintenant à l'aide d'une bande de matière plastique ou analogue, une couche uniforme de pâte thermique à la GPU
à refroidir. La couche doit être inférieure à un millimètre d'épaisseur, faute de quoi les composants environnants peuvent êt
re
ie die Schutzfolie der rot dargestellten 15mm x 15mm x 1,5mm Wärmeleitpad ‘s und legen diese auf die
Speicherbausteine. Die rot dargestellten 30mm x 30mm x 1,5mm Wärmeleitpad für die Spannungswandler müssen
zugeschnitten
Remove the protective film from the thermal pads and place them in the areas shown in red.
The 15mm x 15mm x 1.5mm
.5 mm
are suitable for the voltage converters but must be trimmed to
Retirer le film protecteur de la rougemontre 15mm x 15mm x 1.5mm de tampon thermique et les mettre sur les puces d
e
Le rouge montre 30mm x 30mm x 1,5 mm pour le convertisseur de tension doit être coupé.
Ne pas oublier également
ie nun den zusammen gebauten Kühler auf die Grafikkarte wie im Bild zu sehen. Falls eine Schutzfolie auf dem
ie bitte jetzt die Schutzfolie. Reinigen
Sie die Kontaktflächen auf der Bodenseite des Kühlers
Die Fläche muss frei von Verunreinigungen sein.
the assembled cooler on the graphics card as in the picture. If
a protective film on the cooler exists, please remove the
bottom side of the
cooler with alcohol or similar. The surface must be free of
Assemblez maintenant le refroidisseur monté sur la carte graphique comme dans l'image pour voir. Si un film protecteur sur le
aît enlever le film protecteur maintenant. Nettoyer les surfaces de contact sur la face inférieure du
dispositif de refroidissement avec de l'alcool ou des moyens similaires.
La surface doit être exempte de contaminants.
Schneiden Sie die gelb dargestellten Wärmeleitpad 'sfür die Rückseite
, wie im Bild zu sehen ist, zu. Diese werden auf die
Vergessen Sie auch hier nicht die Schutzfolie zu entfernen.
These are placed on the rear side of the voltage converter and the GPU.
Couper à l'arrière comme sur la photo pour voir le pad thermique jaune montré 's. Ceu
x-ci sont placés sur le côté arrière du
Ne pas oublier également d'enlever le film de protection.
ie Backplate wie in dem Bild gezeigt auf die Grafikkarte. Ein leichter Druck sorgt für optimalen Kontakt zwi
schen
A slight pressure ensures optimal contact between the backplate cooler and
Mettez la plaque arrière comme montré sur la photo de la carte graphique. U
ne légère pression assure un contact optimal entre
ie den Kühler zusammen. Die Schrauben dabei kreuzweise mit je eine
r Umdrehung anziehen.
ie nach ca. 12 Stunden Benutzung der Grafikkarte nochmals alles Schrauben fest.
tighten the screws it with one turn. Pay attention to the pertinent instructions.
e graphics card.
Visser le radiateur. Serrer lesvis avec une seule tour. Faites attention aux instructions pertinentes.
Tournez après environ 12 heures d'utilisation de la carte graphique vis de tout nouveau fixes.
Sicherheitshinweis
Nicht geeignet für Kinder unter 6 Jahren (enthält verschluckbare Kleinteile). Betreiben sie keine
Kühlkomponenten, ohne sicher zu stellen, dass Kühlmittel durch das Kühlsystem fließt. Nicht mit Kühlmittel
betriebene Kühler können sehr he
iß werden. Es besteht Verbrennungsgefahr. Nicht mit Kühlmittel
durchströmte Kühler können die Hardware des Computers zerstören. Vergewissern sie sich immer, dass
die Pumpe beim Einschalten der Hardware ihre Funktion aufnimmt.
Bitte beachten sie, dass zum
Anziehen der Anschlüsse keineWerkzeuge wie Schraubenschlüssel, Zangen
oder ähnliches verwendet werden dürfen!* Alle Produkte aus
Kunststoff oder Gewindeanschlüs
Metall, die mit Kunststoffteilen verbunden sind, werden
mit Werkzeug schnell überlastet
entstandene Risse oder andere Beschädigungen sowie Schaden durch austretende Kühlflüssigkeit fallen
nicht in die Gewährleistung!* Verwenden sie nur Anschlüsse mit einem Dichtring! Durch den Dichtring
reicht ein festes Anziehen mit der Hand völl
ig aus! In Ausnahmefällen werden sie in der Anleitung
eindeutig auf die Verwendung von Werkzeug hingewiesen!
Bestimmungsgemäßer Betrieb
Die Alphacool International GmbH-
Kühlkomponenten sind für die Kühlung von Computerbauteilen von Alphacool
zugelassen. Bei artfremder Nutzung erlischt die Gewährleistung.
Gewährleistung
1. Angaben, Zeichnungen, Abbildungen, technische Daten, Gewichts-, Maß-
und Leistungsbeschreibungen, die in
Prospekten, Katalogen, Rundschreiben, Anzeigen oder Preislisten enthalten sind, haben rein informatorischen Charakter.
Wir übernehmen keine Gewähr für die Richtigkeit dieser Angaben. Hinsichtlich der Art und des Umfa
sind allein die in Bestellung und Auftragsbestätigung enthaltenen Angaben ausschlaggebend.
2. Soweit ein gewährleistungspflichtiger Mangel vorliegt, sind sie im
Rahmen der gesetzlichen Bestim
Nacherfüllung zu verlangen,
vom Vertrag zurückzutreten oder den Kaufpreis zu mindern. Die Verjährungsfrist von
Gewährleistungsansprüchen für die gelieferte Ware beträgt zwei Jahre ab Erhalt der Ware, falls sie Verbraucher (§ 13
BGB) sind. Sind sie Unternehmer (§ 14 BGB), so gilt die
Maßgabe, dass die Verjährungsfrist nur ein Jahr beträgt.
3. Der Gewährleistungsanspruch gilt nur im Zusammenhang mit der Originalrechnung, dem Kassenbeleg oder einer
Bestätigung von ALPHACOOL INTERNATIONAL GMBH über den Gewährleistungsans
pruch.
4. Es li
egt allein im Ermessen von ALPHACOOL INTERNATIONAL GMBH, das defekte Produkt oder defekte
Bestandteile zu reparieren oder zu ersetzen. Das jeweils ersetzte Produkt oder der Bestandteil geht in das Eigentum von
ALPHACOOL INTERNATIONAL GMBH über.
5. Alle G
ewährleistungsansprüche werden von ALPHACOOL INTERNATIONAL GMBH oder durch beauftragte
Fachhändler durchgeführt. Wird die Reparatur von einer nicht autorisierten oder beauftrag-
ten Person durchgeführt,
übernimmt ALPHACOOL INTERNATIONAL GMBH weder Kosten no
ch Haftung, es sein denn, die Reparatur ist vorher
mit ALPHACOOL INTERNATIONAL GMBH abge-stimmt worden.
6. Alle Kosten, die aus einer etwaigen Umrüstung der Produkte entstehen, werden von ALPHACOOL INTERNATIONAL
GMBH nicht übernommen.
7. Die Gewährleistu
ng von ALPHACOOL INTERNATIONAL GMBH schließen die folgenden Punkte nicht ein:
7.1. regelmäßige Kontrollen, Wartung und Reparatur oder der Ersatz von Verschleißteilen
7.2. falsche Bedienungen oder Defekte durch fehlerhafte Installation.
7.3. Schäden, ver
ursacht durch Sturm, Wasser, Feuer, Überspannung, höhere Gewalt oder Krieg, fehlerhaften Anschluss
an das Netz, unzureichende oder fehlerhafte Belüftung oder andere Gründe, auf die ALPHACOOL INTERNATIONAL
GMBH keinen Einfluss hat.
7.4. Schäden, die durch den Transport oder unsachgemäße Verpackung entstehen.
8. Die in dem jeweiligen Land geltenden Rechte des Verbrauchers, z.B. Forderungen gegenüber dem Verkäufer, wie im
Kaufvertrag niedergelegt, werdenvon dieser Gewährleistungserklärung nicht berührt. ALP
HACOOL INTERNATIONAL
GMBH, ihre Niederlassungen und Distributoren, haften nicht für direkte oder indirekte Schäden oder Verluste, soweit
nicht zwingende gesetzliche Bestimmungen dem entgegenstehen.
9. Alphacool International GmbH übernimmt nicht die Gewäh
rleistung des Herstellers der elektronischen Bauteile und
Komponenten. Die Montage des Kühlers erfolgt auf eigenes Risiko.
Kontaktieren sie uns
Anschrift:
Alphacool International GmbH
Mail (Deutsch/ Englisch): info@alphacool.com
Marienberger Str. 1
Internet: www.alphacool.com
D-38122 Braunschweig
Forum: erreichbar über die Startseite
Support-Tel. : +49 (0)5 31/ 288 74-100
Fax: +49 (0)5 31/ 288 74-22
Alle Teile des Kühlsystems sind RoHS konform.
Wenden sie sich an ein autorisiertes Entsorgungsunternehmen in ihrem Land.
Eine Entsorgungmit dem Hausmüll (unsortierter Müll) oder ähnliche Einrichtungen für die Sammlung
kommunaler Abfälle sind nicht zulässig!
© Copyright 2014
Alphacool International GmbH . Alle Rechte incl. Übersetzung vorbehalten. Analoge oder digitale
Vervielfältigungen jeder Art, ausgenommen einer Kopie des Verbrauchers, bedürfen der schriftlichen Zustimmung von
Alphacool International GmbH. Die Anleitung e
ntspricht dem technischen Stand bei Drucklegung. Änderungen
vorbehalten.
Security advice
Not suitable for children under 6 years (contains swallowable
small parts). Do not run any cooling
components, without ensuring that cooling liquid flows through
the cooling system. Coolers driven without
cooling liquid can become very hot. Caution: Burn Hazard! Coolers that are not flowed through by cooling
liquid can destroy the computer hardware. When switching on the hardware, always make sure that the
pump ta
kes up its function. Please note that in order to tighten the connectors no tools such as screw
wrenches, calipers or alike may be used. *
All plastic products or metal threaded connections, which are linked with plastic parts, are easil
loaded with tools! This can cause
tears or other damages, as well as damages occurred by withdraw
coolant are not under the warrantee! Use only Connectors with a sealing ring! By using a sealing ring a
firm tightening with the hand is enough! * Your instructions
manual clearly refers to the use of tools in
exceptional cases!
Specified normal Operation
All Alphacool International GmbH cooling components are constructed and licensed for Alphacool International GmbH
computer construction parts. The warranty expires in case of misuse.
Warranty
1. Data, designs, illustrations, technical data, weight, measurement and specifications, contained in folders, catalogs,
circulars, announcements or price lists, have a purely informative character.
We do not undertake warrantee for the correctness of these data. As to the kind and the range of delivery, alone the data
contained in the order and confirmation of order are decisive.
2. Provided that a warrantor lack is present, you are entitled in the
basis of the legal regulations to require subsequent
delivery, to withdraw from the contract or reduce the purchase price.
If you are a consumer the limitation period of warranty claims for the supplied commodity amounts to two years starting
from receipt
of goods (§ 13 BGB). If you are an entrepreneur, in accordance with legal conditions the limitation period
amounts to only one year (§ 14 BGB).
3. The warranty claim is valid only in combination with the original invoice, the sales slip or an ALPHA COOL
on warranty claim.
4. It is ALPHACOOL INTERNATIONAL GMBH´s own discretionary authority, to replace or repair the defective product or
defective component. The replaced product or component change into property of ALPHACOOL INTERNATIONAL
GMBH.
5. All warranty claims are acco
mplished by ALPHACOOL INTERNATIONAL GMBH or its authorized
is carried out by a non authorized or assigned person, ALPHACOOL INTERNA-
TIONAL GMBH does take over neither
costs nor liability, unless the repair has been previously agreed
with ALPHACOOL INTERNATIONAL GMBH.
6. All costs, resulting from refitting of the products, arenot taken over by Alphacool International GmbH.
7. ALPHACOOL INTERNATIONAL GMBH`s warranty excludes the following points:
7.1. Regular controls maintenance an
d repair or thereplacement of parts subject to regular wear and tear.
7.2. Wrong manipulation or defects caused by incorrect installation.
7.3. Damages caused by storm, water, fire, overvoltage, higherviolence or war, for incorrect
insufficient or incorrect ventilation or other reasons, where ALPHACOOL INTERNA-
TIONAL GMBH has no Influence on.
7.4. Damages resulting from transportation or improper packaging.
8. Consumer´s rights are valid in the respective country; demands made t
o the salesman, as explained and laid down in
the sales contract, will not be covered by this warranty. ALPHACOOL INTERNA-
TIONAL GMBH, its Branch Office and
Distributors, are not responsible for direct or indirect damage or losses, as far as the compelling
oppose that.
9. Alphacool International GmbH does not take over the warrantee of the manufacturer of the electronic construction units
and components. The assembly of the cooler takes place at your own risk.
Contact us:
Address:
Alphacool International GmbH
Mail (German/ English): info@alphacool.com
Marienberger Str. 1
Internet: www.alphacool.com
D-38122 Braunschweig
Forum: Accessible over the homepage
Support-Phone. : +49 (0)5 31/ 288 74-100
Fax: +49 (0)5 31/ 288 74-22
Our products are RoHS-compliant.
Contact an authorized waste management company in your country. A waste removal with the
municipal waste (unsorted garbage) or similar mechanisms for the collection of local wastes is not
permissible!
© copyright Alphacool International GmbH 2014
. All rights reserved including translation. Analog or digital duplications of
any kind, excluding a copy of the consumer, require the written agreement of Alphacool International GmbH. The
instructions manual corresponds to the technical
conditions during printing. Subject to change without prior notice.
Nicht geeignet für Kinder unter 6 Jahren (enthält verschluckbare Kleinteile). Betreiben sie keine
Kühlkomponenten, ohne sicher zu stellen, dass Kühlmittel durch das Kühlsystem fließt. Nicht mit Kühlmittel
iß werden. Es besteht Verbrennungsgefahr. Nicht mit Kühlmittel
durchströmte Kühler können die Hardware des Computers zerstören. Vergewissern sie sich immer, dass
Anziehen der Anschlüsse keineWerkzeuge wie Schraubenschlüssel, Zangen
Kunststoff oder Gewindeanschlüs
se aus
mit Werkzeug schnell überlastet
! Hier-durch
entstandene Risse oder andere Beschädigungen sowie Schaden durch austretende Kühlflüssigkeit fallen
nicht in die Gewährleistung!* Verwenden sie nur Anschlüsse mit einem Dichtring! Durch den Dichtring
ig aus! In Ausnahmefällen werden sie in der Anleitung
Kühlkomponenten sind für die Kühlung von Computerbauteilen von Alphacool
und Leistungsbeschreibungen, die in
Prospekten, Katalogen, Rundschreiben, Anzeigen oder Preislisten enthalten sind, haben rein informatorischen Charakter.
Wir übernehmen keine Gewähr für die Richtigkeit dieser Angaben. Hinsichtlich der Art und des Umfa
ngs der Lieferung
sind allein die in Bestellung und Auftragsbestätigung enthaltenen Angaben ausschlaggebend.
Rahmen der gesetzlichen Bestim
mungen berechtigt,
vom Vertrag zurückzutreten oder den Kaufpreis zu mindern. Die Verjährungsfrist von
Gewährleistungsansprüchen für die gelieferte Ware beträgt zwei Jahre ab Erhalt der Ware, falls sie Verbraucher (§ 13
Maßgabe, dass die Verjährungsfrist nur ein Jahr beträgt.
3. Der Gewährleistungsanspruch gilt nur im Zusammenhang mit der Originalrechnung, dem Kassenbeleg oder einer
pruch.
egt allein im Ermessen von ALPHACOOL INTERNATIONAL GMBH, das defekte Produkt oder defekte
Bestandteile zu reparieren oder zu ersetzen. Das jeweils ersetzte Produkt oder der Bestandteil geht in das Eigentum von
ewährleistungsansprüche werden von ALPHACOOL INTERNATIONAL GMBH oder durch beauftragte
ten Person durchgeführt,
ch Haftung, es sein denn, die Reparatur ist vorher
6. Alle Kosten, die aus einer etwaigen Umrüstung der Produkte entstehen, werden von ALPHACOOL INTERNATIONAL
ng von ALPHACOOL INTERNATIONAL GMBH schließen die folgenden Punkte nicht ein:
ursacht durch Sturm, Wasser, Feuer, Überspannung, höhere Gewalt oder Krieg, fehlerhaften Anschluss
an das Netz, unzureichende oder fehlerhafte Belüftung oder andere Gründe, auf die ALPHACOOL INTERNATIONAL
8. Die in dem jeweiligen Land geltenden Rechte des Verbrauchers, z.B. Forderungen gegenüber dem Verkäufer, wie im
HACOOL INTERNATIONAL
GMBH, ihre Niederlassungen und Distributoren, haften nicht für direkte oder indirekte Schäden oder Verluste, soweit
rleistung des Herstellers der elektronischen Bauteile und
Mail (Deutsch/ Englisch): info@alphacool.com
Internet: www.alphacool.com
Forum: erreichbar über die Startseite
Wenden sie sich an ein autorisiertes Entsorgungsunternehmen in ihrem Land.
Eine Entsorgungmit dem Hausmüll (unsortierter Müll) oder ähnliche Einrichtungen für die Sammlung
Alphacool International GmbH . Alle Rechte incl. Übersetzung vorbehalten. Analoge oder digitale
Vervielfältigungen jeder Art, ausgenommen einer Kopie des Verbrauchers, bedürfen der schriftlichen Zustimmung von
ntspricht dem technischen Stand bei Drucklegung. Änderungen
small parts). Do not run any cooling
the cooling system. Coolers driven without
cooling liquid can become very hot. Caution: Burn Hazard! Coolers that are not flowed through by cooling
liquid can destroy the computer hardware. When switching on the hardware, always make sure that the
kes up its function. Please note that in order to tighten the connectors no tools such as screw
All plastic products or metal threaded connections, which are linked with plastic parts, are easil
y over-
tears or other damages, as well as damages occurred by withdraw
-ing
coolant are not under the warrantee! Use only Connectors with a sealing ring! By using a sealing ring a
manual clearly refers to the use of tools in
All Alphacool International GmbH cooling components are constructed and licensed for Alphacool International GmbH
1. Data, designs, illustrations, technical data, weight, measurement and specifications, contained in folders, catalogs,
We do not undertake warrantee for the correctness of these data. As to the kind and the range of delivery, alone the data
basis of the legal regulations to require subsequent
If you are a consumer the limitation period of warranty claims for the supplied commodity amounts to two years starting
of goods (§ 13 BGB). If you are an entrepreneur, in accordance with legal conditions the limitation period
3. The warranty claim is valid only in combination with the original invoice, the sales slip or an ALPHA COOL
confirmation
4. It is ALPHACOOL INTERNATIONAL GMBH´s own discretionary authority, to replace or repair the defective product or
defective component. The replaced product or component change into property of ALPHACOOL INTERNATIONAL
mplished by ALPHACOOL INTERNATIONAL GMBH or its authorized
dealers. If the repair
TIONAL GMBH does take over neither
with ALPHACOOL INTERNATIONAL GMBH.
6. All costs, resulting from refitting of the products, arenot taken over by Alphacool International GmbH.
d repair or thereplacement of parts subject to regular wear and tear.
7.3. Damages caused by storm, water, fire, overvoltage, higherviolence or war, for incorrect
connection to the net,
TIONAL GMBH has no Influence on.
o the salesman, as explained and laid down in
TIONAL GMBH, its Branch Office and
Distributors, are not responsible for direct or indirect damage or losses, as far as the compelling
legal regulations do not
9. Alphacool International GmbH does not take over the warrantee of the manufacturer of the electronic construction units
Mail (German/ English): inf[email protected]m
Internet: www.alphacool.com
Forum: Accessible over the homepage
Contact an authorized waste management company in your country. A waste removal with the
municipal waste (unsorted garbage) or similar mechanisms for the collection of local wastes is not
. All rights reserved including translation. Analog or digital duplications of
any kind, excluding a copy of the consumer, require the written agreement of Alphacool International GmbH. The
conditions during printing. Subject to change without prior notice.
NexXxoS
GPX-
N 770
Avis General de sécurité
Ne convient pas aux enfants de moins de 6 ans (contient des petites pièces que pouvant s´avaler
facilement. N´actionnez pas des composants refroidisseurs, sans vous assurer que le liquide de
refroidissement circule dans le système de refroidissement. Refro
refroidissant peuvent devenir très chaud. Il existe un danger de brulure. Refroidisseurs pas écoules avec
liquide de refroidissement peuvent détruire le équipement informatique de l´ordinateur. Au mise en marche
le équipement informatique, assurez-
vous toujours que la pompe prend sa fonction.
Veuillez considérer qu´au resserrement des connexions, aucun outil comme des clés, pinces ou sem
blable
ne peut être utilise ! *Tous les produits en matière plastique ou connexions de fil en métal qui sont
lies à pièces de plastique deviennent rapidement surcharges avec l´outil ! Fissures ou autres
endommagements causées de cette façon, ainsi que dommages p
tombent pas dans la garantie !* Utilisez seulement Connexions avec un joint torique ! Par joint torique un
ferme serrer avec la main c´est complètement suffit. *Dans les instructions vous êtes clairement informe
su
r l’utilisation d’outils en cas exceptionnels !
Toute autre utilisation est considéré comme inappropriée et, par conséquent, dangereuse
Les composants refroidisseurs Alphacool International GmbH sont agréés pour le refroidissement de composants
d´ordinateur Alphacool International GmbH. En cas d´ utilisation non conforme à sa destina
Garantie
1. Des information
s, dessins techniques, illustrations, données techniques, descriptions des prestations de poids et de
mesure qui sont contenus dans les prospects, catalogues, circulaires, annonces ou listes de prix, ont un caractère
purement informatif. Nous ne portons pa
s garantie en faveur de la justesse de ces informations. Concernant le sort et
volume de la livraison, seulement les informations contenues dans la commande et la confirmation de commande sont
décisives.
2. Autant qu´un carence assujettie a la garantie ex
iste, vous êtes autorises dans le cadre des définitions légales d´exiger
le postaccomplissement, reculer du contract ou diminuer le prix d´achat. Le délai de prescription des exigences de
garantie pour la marchandise livrée se monte pendant deux ans des la
soyez consommateur (§13 le Code civil). Si vous êtes entrepreneur, est valable la mesure que le délai de prescription
monte seulement a un an (§14 le Code civil).
3. Le droit a la garantie n´est en vigueur qu´e
n rapport avec la facture originale, le ticket de caisse ou une confirmation
ALPHACOOL INTERNATIONAL GMBH sur le droit de garantie.
4. C´est laissé à l´appréciation d´ALPHACOOL INTERNATIONAL GMBH, de réparer ou remplacer le produit ou
composant défectif.
Le produit ou composant remplacé passe dans la propriété d´ALPHACOOL INTERNATIONAL
GMBH.
5. Tous les droits a la garantie sont effectuées directement par ALPHACOOL INTERNATIONAL GMBH ou ses
revendeurs délégués. Si la réparation est effectue par une person
INTERNATIONAL GMBH ne participe pas aux dépenses ni quelque responsabili
accordée avec ALPHACOOL INTERNATIONAL GMBH.
6. Tous les couts occasionnes par une éventuelle adaptatio
INTERNATIONAL GMBH.
7. Les points suivants ne comprennent pas la garantie ALPHACOOL INTERNATIONAL GMBH :
7.1. Contrôles réguliers, maintenance et réparation ou le remplacement de pièces d´usage.
7.2. Mauv
aise utilisation ou défauts par une installation incorrecte.
7.3. Dommages cause par orage, eau, feu, surtension, un cas de force majeure ou une guerre, raccordement défectueux
au réseau, aération insuffisante ou défectueuse ou d´autres raisons, sur lesqu
n´a pas d´influence.
7.4. Dommages qui naissent de transport ou d´emballage inadéquat.
8. Les droits de consommateur étant en vigueur dans le pays respectif, par exemple des demandes envers le vendeur,
comme déposé dans l
e contract de vente, ne sont pas touches par cette explica
INTERNATIONAL GMBH,leurs établissements et distributeurs ne portent pas responsabilité des dommages directes ou
indirectes ou des pertes jusqu´a ce que les définitions l
9. Alphacool International GmbH ne se charge pas de la garantie du fabricant des éléments et compo
électroniques. L´assemblage du refroidisseur s´effectue a vos risques et périls.
Veuillez prendre contact avec nous
Adresse:
Alphacool International GmbH
Marienberger Str. 1
D-38122 Braunschweig
Support-Tel. : +49 (0)5 31/ 288 74-100
Fax: +49 (0)5 31/ 288 74-22
Toutes les parties du système de refroidissent sont conforme a la RoSH.
Adressez-
vous à une entreprise de traitement des déchets autorisée dans votre pays. Un traitement
des déchets avec déchet domestique (déchet non assortie)
collection des déchets communaux sont illicites!
© Copyright 2014
. Alphacool International GmbH se réserve tous les droits de poursuivre toute infraction à ces
conditions copyright : traductions, analogue ou digit
al reproductions de chaque type, à l´exception d’une copie du
consommateur requièrent le consentement écrit d´Alphacool International GmbH. Les instructions de service
correspondent aux derniers indices des standards techniques lors que mise à l´impression
modifications.
NexXxoS
N 770
-M02
Anleitung
Instructions manual
Instructions de service
Ne convient pas aux enfants de moins de 6 ans (contient des petites pièces que pouvant s´avaler
facilement. N´actionnez pas des composants refroidisseurs, sans vous assurer que le liquide de
refroidissement circule dans le système de refroidissement. Refro
idisseurs actionnes sans liquide
refroidissant peuvent devenir très chaud. Il existe un danger de brulure. Refroidisseurs pas écoules avec
liquide de refroidissement peuvent détruire le équipement informatique de l´ordinateur. Au mise en marche
vous toujours que la pompe prend sa fonction.
Veuillez considérer qu´au resserrement des connexions, aucun outil comme des clés, pinces ou sem
-
ne peut être utilise ! *Tous les produits en matière plastique ou connexions de fil en métal qui sont
lies à pièces de plastique deviennent rapidement surcharges avec l´outil ! Fissures ou autres
endommagements causées de cette façon, ainsi que dommages p
ar l´échapper du liquide refroidissant ne
tombent pas dans la garantie !* Utilisez seulement Connexions avec un joint torique ! Par joint torique un
ferme serrer avec la main c´est complètement suffit. *Dans les instructions vous êtes clairement informe
r l’utilisation d’outils en cas exceptionnels !
Toute autre utilisation est considéré comme inappropriée et, par conséquent, dangereuse
Les composants refroidisseurs Alphacool International GmbH sont agréés pour le refroidissement de composants
d´ordinateur Alphacool International GmbH. En cas d´ utilisation non conforme à sa destina
-tion la garantie s´éteint.
s, dessins techniques, illustrations, données techniques, descriptions des prestations de poids et de
mesure qui sont contenus dans les prospects, catalogues, circulaires, annonces ou listes de prix, ont un caractère
s garantie en faveur de la justesse de ces informations. Concernant le sort et
volume de la livraison, seulement les informations contenues dans la commande et la confirmation de commande sont
iste, vous êtes autorises dans le cadre des définitions légales d´exiger
le postaccomplissement, reculer du contract ou diminuer le prix d´achat. Le délai de prescription des exigences de
garantie pour la marchandise livrée se monte pendant deux ans des la
réception de la marchandise, au cas où vous
soyez consommateur (§13 le Code civil). Si vous êtes entrepreneur, est valable la mesure que le délai de prescription
n rapport avec la facture originale, le ticket de caisse ou une confirmation
ALPHACOOL INTERNATIONAL GMBH sur le droit de garantie.
4. C´est laissé à l´appréciation d´ALPHACOOL INTERNATIONAL GMBH, de réparer ou remplacer le produit ou
Le produit ou composant remplacé passe dans la propriété d´ALPHACOOL INTERNATIONAL
5. Tous les droits a la garantie sont effectuées directement par ALPHACOOL INTERNATIONAL GMBH ou ses
revendeurs délégués. Si la réparation est effectue par une person
ne non autorisée ou manda-tée, ALPHACOOL
INTERNATIONAL GMBH ne participe pas aux dépenses ni quelque responsabili
-tés, sauf si la réparation a été avant
accordée avec ALPHACOOL INTERNATIONAL GMBH.
6. Tous les couts occasionnes par une éventuelle adaptatio
n du produit, ne sont pas acceptes par ALPHACOOL
7. Les points suivants ne comprennent pas la garantie ALPHACOOL INTERNATIONAL GMBH :
7.1. Contrôles réguliers, maintenance et réparation ou le remplacement de pièces d´usage.
aise utilisation ou défauts par une installation incorrecte.
7.3. Dommages cause par orage, eau, feu, surtension, un cas de force majeure ou une guerre, raccordement défectueux
au réseau, aération insuffisante ou défectueuse ou d´autres raisons, sur lesqu
els ALPHACOOL INTERNATIONAL GMBH
7.4. Dommages qui naissent de transport ou d´emballage inadéquat.
8. Les droits de consommateur étant en vigueur dans le pays respectif, par exemple des demandes envers le vendeur,
e contract de vente, ne sont pas touches par cette explica
-tion de garantie ALPHACOOL
INTERNATIONAL GMBH,leurs établissements et distributeurs ne portent pas responsabilité des dommages directes ou
indirectes ou des pertes jusqu´a ce que les définitions l
égales irréfutables se lui opposent.
9. Alphacool International GmbH ne se charge pas de la garantie du fabricant des éléments et compo
-sants
électroniques. L´assemblage du refroidisseur s´effectue a vos risques et périls.
Mail (Allemand/ Anglais): info@alphacool.com
Internet: www.alphacool.com
Forum: accessible sur la page d´accueil
Toutes les parties du système de refroidissent sont conforme a la RoSH.
vous à une entreprise de traitement des déchets autorisée dans votre pays. Un traitement
des déchets avec déchet domestique (déchet non assortie)
ou des institutions semblables pour la
collection des déchets communaux sont illicites!
. Alphacool International GmbH se réserve tous les droits de poursuivre toute infraction à ces
al reproductions de chaque type, à l´exception d’une copie du
consommateur requièrent le consentement écrit d´Alphacool International GmbH. Les instructions de service
correspondent aux derniers indices des standards techniques lors que mise à l´impression
. Sous réserve de

Other Alphacool Computer Hardware manuals

Alphacool Eisblock Aurora Acryl RX 7900XT Reference User manual

Alphacool

Alphacool Eisblock Aurora Acryl RX 7900XT Reference User manual

Alphacool GPX-N 1080-M16 User manual

Alphacool

Alphacool GPX-N 1080-M16 User manual

Alphacool GPX-N 1080Pro-M22 User manual

Alphacool

Alphacool GPX-N 1080Pro-M22 User manual

Alphacool NexXxoS ATXP User manual

Alphacool

Alphacool NexXxoS ATXP User manual

Alphacool CORE EISBLOCK AURORA RTX-N 3090 TI FTW3... User manual

Alphacool

Alphacool CORE EISBLOCK AURORA RTX-N 3090 TI FTW3... User manual

Alphacool GPX-N 970-M17 User manual

Alphacool

Alphacool GPX-N 970-M17 User manual

Alphacool GPX-N 980-M07 User manual

Alphacool

Alphacool GPX-N 980-M07 User manual

Alphacool RTX A4000 User manual

Alphacool

Alphacool RTX A4000 User manual

Alphacool CORA HF Series User manual

Alphacool

Alphacool CORA HF Series User manual

Alphacool EISBLOCK GPX-N 2080 Ti User manual

Alphacool

Alphacool EISBLOCK GPX-N 2080 Ti User manual

Alphacool EISBLOCK AURORA Acryl GPX-N RTX 3090 GAMING X... User manual

Alphacool

Alphacool EISBLOCK AURORA Acryl GPX-N RTX 3090 GAMING X... User manual

Alphacool GPX-N 1080-M15 User manual

Alphacool

Alphacool GPX-N 1080-M15 User manual

Alphacool Alphacool Eisbecher Aurora D5 User manual

Alphacool

Alphacool Alphacool Eisbecher Aurora D5 User manual

Alphacool Core Geforce RTX 4090 Master User manual

Alphacool

Alphacool Core Geforce RTX 4090 Master User manual

Alphacool Eisblock Aurora Geforce RTX 4090 Strix Plus... User manual

Alphacool

Alphacool Eisblock Aurora Geforce RTX 4090 Strix Plus... User manual

Alphacool EISBLOCK AURORA ACRYL RX 7900 XTX NITRO User manual

Alphacool

Alphacool EISBLOCK AURORA ACRYL RX 7900 XTX NITRO User manual

Alphacool NexXxoS XP3 User manual

Alphacool

Alphacool NexXxoS XP3 User manual

Alphacool GPX-N 1080pro-M16 User manual

Alphacool

Alphacool GPX-N 1080pro-M16 User manual

Alphacool EISBLOCK AURORA ACRYL GPX-A RADEON RX 6700XT MERC 319 INCL.... User manual

Alphacool

Alphacool EISBLOCK AURORA ACRYL GPX-A RADEON RX 6700XT MERC 319 INCL.... User manual

Alphacool GPX-N 1080-M04 User manual

Alphacool

Alphacool GPX-N 1080-M04 User manual

Alphacool GPX-A 380-M07 User manual

Alphacool

Alphacool GPX-A 380-M07 User manual

Alphacool Aurora High Flow User manual

Alphacool

Alphacool Aurora High Flow User manual

Alphacool Eisblock XPX PRO User manual

Alphacool

Alphacool Eisblock XPX PRO User manual

Alphacool NexXxoS GPX-A 270-M02 User manual

Alphacool

Alphacool NexXxoS GPX-A 270-M02 User manual

Popular Computer Hardware manuals by other brands

Shimmer External Expansion Board user guide

Shimmer

Shimmer External Expansion Board user guide

STEINWAY LYNGDORF SP-1 installation manual

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual

Cooler Master Hyper 212 EVO user manual

Cooler Master

Cooler Master Hyper 212 EVO user manual

TJ Media TEF- user manual

TJ Media

TJ Media TEF- user manual

Onkyo ED-301 instruction manual

Onkyo

Onkyo ED-301 instruction manual

CNC4PC C34HS2 user manual

CNC4PC

CNC4PC C34HS2 user manual

Nvidia GeForce2 Ti SP6600Ti manual

Nvidia

Nvidia GeForce2 Ti SP6600Ti manual

EK-Quantum Vector2 Strix RTX 3080 D-RGB user guide

EK-Quantum

EK-Quantum Vector2 Strix RTX 3080 D-RGB user guide

Intel Compute Module MFS2600KI user guide

Intel

Intel Compute Module MFS2600KI user guide

Diablotek F12025 Specifications

Diablotek

Diablotek F12025 Specifications

Avalue Technology ENX-LX800 user manual

Avalue Technology

Avalue Technology ENX-LX800 user manual

dresden elektronik StarterKit quick start guide

dresden elektronik

dresden elektronik StarterKit quick start guide

Artesyn ATCA-9305 quick start guide

Artesyn

Artesyn ATCA-9305 quick start guide

Dell PowerEdge 1650 installation manual

Dell

Dell PowerEdge 1650 installation manual

TRENDnet TU2-H4PC Quick installation guide

TRENDnet

TRENDnet TU2-H4PC Quick installation guide

Hal Communications MCEM-8080 Technical manual

Hal Communications

Hal Communications MCEM-8080 Technical manual

DAQ system PCI-FRM11 user manual

DAQ system

DAQ system PCI-FRM11 user manual

Intel EP80579 Guide

Intel

Intel EP80579 Guide

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.