Alpine PDX-F6 User manual

FOR CAR USE ONLY/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMOVILES
PDX-F6
PDX-F4
4CHANNEL POWER AMPLIFIER
• OWNER'S MANUAL
Please read this manual to maximize your enjoyment
of the outstanding performance and feature capabilities
of the equipment, then retain the manual for future
reference.
•
MODE D'EMPLOI
Veuillez lire ce
mode d'emploi pour tirer pleinement
profit des excellentes performances et fonctions de cet
appareil, et conservez-Ie
pour toute reference future.
•
MANUAL DE OPERACION
Lea este manual, por favor, para disfrutar al maximo
de las excepcionales prestaciones yposibilidades
funcionales que ofrece el equipo, luego guarde el manual
para usarlo
como referencia en el futuro.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone [phone]
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
Qingdao Dongli Xinhaiyuan
Printing Co., Ltd.
No.17, jiushuidong road,
Qingdao, China
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone [phone]
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3,
80807 Munchen, Germany
Phone [phone]
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway,
Coventry CV4 9TW, U.K.
Phone [phone]
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B338 101 280)
98, Rue de la Belle Etoile,
Z.1. Paris Nord II, B.P. 50016,
95945 Roissy Charles de Gaulle
Cedex, France
Phone [phone]
ALPINE ITALIA S.p.A.
Via Ie C. Colombo 8, 20090
Trezzano Sui Naviglio (MI), Italy
Phone [phone]
ALPINE ELECTRONICS DE ESPANA, S.A.
Portal de Gamarra 36,
Pabell6n, 32
01013 Vitoria (Alava) -APDO
133, Spain
Phone [phone]
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone [phone]
68-13530Z50-B
M351441401A
Printed
in China (Y)

ENGLISH
Introduction:
Please read this OWNER'S MANUAL thoroughly to familiarize yourself with each control and function. We at
ALPINE hope that your new PDX-F6/F4 will give you many years of listening enjoyment.
In case of problems when installing your PDX-F6/F4, please contact your authorized ALPINE dealer.
CAUTION: These controls are for tuning your system. Please consult your authorized Dealer for
adjustment.
Lf:. WARNING This symbol means important instructions.
Failure to heed them can result
in serious injury or death.
Lf:. CAUTION This symbol means important instructions.
Failure to heed them can result
in injury or property damages.
&WARNING
•DO NOT OPERATE ANY FUNCTION THATTAKESYOUR ATIENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a
complete stop. Always stop the vehicle
in asafe location before performing these functions. Failure to do so may result in
an accident.
•KEEP THE VOLUME
AT ALEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings,
etc.) can
be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN ACAR MAY ALSO
CAUSE HEARING DAMAGE.
•DO NOT DISASSEMBLE OR ALTER. Doing so may result
in an accident, fire or electric shock.
•USETHIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may
result
in fire, electric shock or other injury.
•USETHE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or
electric shock.
•DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result
in fire.
•MAKETHE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product
damage.
•USE ONLY IN CARS WITH A12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.)
Failure to do so may result
in fire, etc.
•BEFORE WIRING, DISCONNECTTHE CABLE FROMTHE NEGATIVE BATIERY TERMINAL. Failure to do
so may result
in electric shock or injury due to electrical shorts.
•DO NOT ALLOW CABLESTO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and
cables
in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or
hang up
on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.
•DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of the wire and result
in fire or electric shock.
•DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for
installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical
wiring. Failure to take such precautions may result
in fire.
•DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMSTO MAKE GROUND
CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or
tanks should NEVER be used for installations or ground connections. Using such parts could disable control of
the vehicle and cause fire etc.
•KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OFTHE REACH OF CHILDREN. Swallowing
them may result
in serious injury. If swallowed, consult aphysician immediately.
&CAUTION
•HALT USE IMMEDIATELY IF APROBLEM APPEARS. Failure to do so may cause personal injury or damage
to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Center for repairing.
•HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires
special technical skill and experience.
To ensure safety, always contact the dealer where you purchased this
product to have the work done.
•USE SPECIFIED ACCESSORY PARTS AND INSTALLTHEM SECURELY. Be sure to use only the specified
accessory parts. Use of other than designated parts may damage this unit internally or may not securely install
the unit
in place. This may cause parts to become loose resulting in hazards or product failure.
•ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY ASHARP METAL EDGE. Route the
cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent
crimping and damage to the wiring. If wiring passes through ahole
in metal, use arubber grommet to prevent
the wire's insulation from being cut by the metal edge of the hole.
•DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations
with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result
in product
failure.

CD Top Cover/
Couvercle
superieur/
Tapa superior
Self-Tapping
Screw
(M4 x36)/
Vis auto-
taraudees/
Tornillos
autorroscantes
Ground Lead/
Conducteur de
mise
ilia terre/
Cable de tierra
Hole/
Trous/
Agujeros/
ACCESSORIES
•IMPORTANT
Please record the serial number of your unit in the
space provided here and keep it as apermanent
record. The serial number plate is located on the rear
of the unit.
SERIAL NUMBER: _
:~~i~~~i:g~ ~~~~N...,IC."....,IA...,N...,:-------
PLACE OF PURCHASE:
SPECIFICATIONS
SERVICE CARE
•IMPORTANT NOTICE
This Amplifier has been type tested and found to
comply with the limits for aClass Bcomputing device
in
accordance with the specifications in Subpart J of Part
15 of FCC Rules. This equipment generates
and uses
radio frequency energy, and it must be installed and
used properly
in accordance with the manufacturer's
instructions.
• For European Customers
Should you have any questions about warranty, please
consult your store of purchase.
• For Customers in other Countries
IMPORTANT NOTICE
Customers who purchase the product with which this
notice is packaged,
and who make this purchase in
countries other than the United States of America and
Canada, please contact your dealer for information
regarding warranty coverage.
NOTE:
• For product improvement. specifications and design are :mbjecr to change without IlOtice.
POX·F6 POX·F4
RMS Continuous Power (at 14.4 V)
•Per channel into 4ohms
150Wx4 100Wx4
•Per channel into 2ohms
150Wx4 100Wx 4
•Bridged into 4ohms
300Wx2 200Wx2
THO+N (Reference: 10 W / rated power into 4ohms) 0.003 % / 0.05 %
SIN Ratio (IHF AWeighted, Reference: rated power into 4ohms) 116 dBA 115 dBA
SIN Ratio (IHF AWeighted, Reference: 1W into 4ohms) 94 dBA
95dBA
Input Impedance 10k ohms
Frequency Response (Reference: 1 W into 4ohms) 5Hz -100 kHz / 0 dB --3 dB
Crossover Frequency
(Variable, L.P.F /H.P.F /OFF Selectable)
•1/2 ch 30
Hz- 400 Hz (-12 dB /oct)
•3/4 ch 30 Hz -400 Hz (-12 dB /oct)
Input Sensitivity (V /at 10k ohms) 0.2 V - 4.0 Vwith Input Level
Dimensions •Width 257.0 mm (10-1/8")
•Height 50.8 mm (2")
•Depth 192.0 mm (7·9/16")
Weight 2.88
kg 2.87 kg
Fig. 1
Fig. 2
CD
CD
CD
..
CD Machine Screw
(M3 x 7)/
Vis mecanique/
Tornillo
mecanico
•Stacking Plate (PDX-F6 Only).. . 2
•Machine Screw (M3 x7) (PDX-F6 Only)
.. . .4
•Machine Screw (M4 x 24) (POX-F6 Only).. .. 4
•Self-Tapping Screw (M4 x36) 4
•Battery Connector 1
•Speaker Connector:.. . 4
•Hexagon Wrench (Large/Small) 1SET
INSTALLATION (Fig. 1 - Fig. 4)
2
®Stacking Plate/
Plateau
d'empilement!
Placa de
apilamiento
Fig. 3
-
CD Machine Screw
(M4 x24)/
Vis mecanique/
Tornillo
mecanico
Second unit!
Deuxieme unite/
Segunda unidad
First unit!
premiere unite/
Primera unidad
Fig. 4
With this series of amplifiers, up to three units can be stacked together in atypical installation. Depending on the
number
of units you wish to install, refer to instructions Ato Cbelow.
&'CAUTION
• Caution on connection terminals/parts
•Keep electrically conductive objects away from the unit's terminals/parts (power terminals, fuses, speaker
output terminals, RCA connectors, etc.). Doing
so prevents apossible short circuit and damage to the unit.
Note:
•Stack installation should always be parallel to the vehicle floor - do not install at an iI/cline. sitch as leaning agaiflSt a
vertical slliface.
as this will invalidate your warranty.
Preparation for installation
1. Using the amplifier as atemplate, mark the four screw locations.
2. Make sure there are no objects behind the surface that may become damaged during drilling.
3. Drill the screw holes.
4. Position the PDX-F6/F4 over the screw holes, and secure with four self-tapping screws.
NOTE:
• To securely connect the ground lead, t/se all already iI/stalled screw 011 the metal part oIthe vehicle (marked *). Be sure
this is agood grot/nd by checking continuity to the battery (-) terminal. As much as possible connect all equipmell1 to the
same ground poillt. These pmcedure.\· will help eliminate noise.
A. Single unit installation
1. Position the unit over the screw holes you prepared earlier.
2. Remove the Top Cover by inserting aflat-tipped instrument (such
as apanel removal tool or slotted
screwdriver) into the 2notches of the unit (marked A). II removal is still not possible, bend the Top Cover and
remove the tabs on both sides. Refer to Fig. 1.
3. Fasten the unit down with the four self-tapping screws (M4 x36, supplied).Refer to Fig. 2.
4. Attach the Top Cover.
B. Stack installation 01 two units
1. Firstly, securely install one unit, as described in steps 1-3 of Aabove.
2. Attach the Stacking Plates
(*) on the first unit with Machine Screws M3 x7(*). Refer to Fig. 3.
3. Stack the second unit on
top of the installed unit.
4. Attach the second unit with four Machine Screws
M4 x24 (*). Refer to Fig. 4.
5. Attach the Top Cover to the second unit.
C. Stack installation 01 three units
1. Firstly, securely install the first two units firmly as described in steps 1to 4 of Babove.
2. Next, install the third unit
as described for the second unit in Babove. With this, stack installation of the 3
units is completed.
*PDX-F6: Supplied.
PDX-F4: Supplied with the stack illstallation unit.

Fig. 7
c) Set to the "OFF" position when the amplifier
will be used for driving full-range speakers.
The full frequency bandwidth will be
output to the speakers with
no high or low
frequency attenuation.
b) Set to the "HP" position
when the amplifier
is used to drive atweeter/midrange system.
The frequencies below the crossover point
will be attenuated
at12 dB/octave.
FILTER
lro
---', <-
OFF HP LP
FILTER
rn
---',,-
OFF HP LP
*
OFF HP LP
•Cautions on PowerWire connections
The power wire cannot be connected until its end has been
stripped. Below explains how to connect the stripped end of
the power wire.
Notes:
Use the .mpplied he.wgol/ screws/or this cO/lnection. It i~' highly
recommended /hat lhi.~ be carried ow by the dealer.
Ifyuu make this cOf/Iln-tion yourself ensure the cOl/nection is
correct by following the i/lSlrucrion.~ below careflllly
Be silre
to lise the .\'lIpplied hexllgmr screw~"for thi.l· cO/lflection.
For safety ret/SOIlS. COlll/ect the bauery wire last.
To !Jrevetlt disCOllllectioll of tile leads or droppil/g of the UIl;t, do
not ('(jrry Ihe u1Iit by the wire.
Be SlIre to mid afuse as dose as pos.\'ihle to the baltery. Make
sure to use aflue oj/he correN ra/ingfor the power wire.
1. Check the wire gauge.
Notes:
Only lue 4AWG·6AWGI13 mm"_21 mm" (the wire gallge)for
tllis cOlll/ection
•
If in doubt. CO/lsult your (Iealer or Customer Supporr
reglln/ing correct wire gallge to use.
2. Strip back between 7-10 mm (9/32--3/8") of the power
wire's insulation to expose the conductor.
Notes:
If Ihe length of Ihe exposed com/uctor i.\· 100 shorr. aIJoor
COIlIlectioll lIIay occur cllusing operatiollfllill/!"C or SOI/IU/
illterruptiof!.
COl/versely. if the exposed conductor is too /0I1R. all
electrical
~'}lOrt-circ/(it /lWV OCCIII:
3. Loosen the unit's wire terminal hexagon screws, and insert
the exposed conductor into the terminal and finally tighten
to secure the connection.
4. Verify that the power wire is connected securely.
•Cautions on speaker wire connections
When you connect the speaker wire to the unit. you need to
insert the speaker wire into the speaker connector. Below
explains how to
insert the speaker wire into the speaker
connector.
1.
Check the wire gauge.
Notes:
Tlte ami/able S!Jellker wire glU/ge/or thi.~ IIl1it is ,sAIVG-
16AWGI8 mm
I-13 mm".
• If in doubt. consult your l/eliler regardillK correct wire gallge
to /lse.
2. Strip back between 7-10 mm (9/32--3/8") of the wire's
insulation to expose the conductor.
Notes:
If the lel/glh of the exposed COfl{/uctor is too .~hor/. a poor
COl/nection may occur callsing operatiol/fllilure or sound
interruptioll.
Conwrse/y. iflhe eXlwsed l'onductor is too 101/g. WI
electrical ~'hort-circ/(it /lUlV OCCIlr.
3Loosen fully the speaker plug's 2hexagon screws using
the hexagon wrench (small. supplied).
4. Insert fully the exposed conductor of the speaker wire into
the wire terminal hole. Refer to Fig. 8.
Note:
l/lsert the spetlker wire observi/lg tile +1- illl/iullio/ls OIl the
speaker COllllec/or. Illsert the positive .~IJellker It-'ire into the
positive speaker termi/wl, and rhe negative .I'pulker wire into
the lIeglltive .\peakertermillal.
5. Tighten the 2hexagon screws using the hexagon wrench
(small, supplied).
CD, m Crossover Mode Selector Switch
FILTER a) Set to the "LP" position when the amplifier is
used to drive asubwoofer.
The frequencies
above the crossover point will be attenuated
at 12 dB/octave.
SWITCH SETTINGS (Fig. 9)
CONNECTIONS (Fig. 5 - Fig. 8)
When making adjustments 10·15 below, remove the hexagon
screw (indicated by *in the illustration) using the hexagon
wrench (small. supplied), and then open the control cover.
o Power Indicator
Lights up when power is on.
Is off when
power is off.
0. G)lnput Gain Adjustment Control
Set the PDX4F6/F4 input gain to the minimum (4V) position.
Using adynamic CD as asource, increase the head unit
volume until the output distorts. Then, reduce the volume 1
step (or until the output is
no longer distorted). Now, increase
the amplifier gain until the sound from the speakers becomes
distorted. Reduce the gain slightly so the sound is
no longer
distorted to achieve the optimum gain setting.
Cit Battery Lead (Yellow, sold separately)
Be sure to add a a fuse as close as possible to the battery's
positive (+) terminal. This fuse will protect your vehicle's
electrical system in case
of ashort circuit. If you need to
extend this lead, only use
4AWG-6AWG/13 mm
2-
21 mm
2(the
wire gauge) for this connection.
8 Remote Turn-On Lead (BluelWhite. sold separately)
Connect this lead to the remote turn-on or power antenna
(positive trigger. (+) 12V only) lead
of your head unit.
e Ground Lead (Black, sold separately)
Connect this lead securely to aclean, bare metal spot on
the vehicle's chassis. Verify this point to be atrue ground by
checking for continuity between that point and the negative
(-) terminal of the vehicle's battery. Ground all your audio
components to the same point on the chassis to prevent
ground loops.
Before making connections, be sure to turn the
power off to all
audio components. Connect the yellow battery lead from the
amp directly to the positive (+) terminal of the vehicle's battery.
Do not connect this lead to the fuse block.
& CAUTION
•Caution on connection terminals/parts
Keep electrically conductive objects away from the unit's
terminals/parts (power terminals, fuses, speaker output
terminals,
RCA connectors, etc.). Doing so prevents a
possible short circuit and
damage to the unit.
To
prevent external noise from entering the audio system.
•Locate the unit and route the leads at least 10 cm (3-
15/16") away from the
car harness.
Keep the battery
power leads as far away from other leads
as possible.
Connect the ground lead securely to abare metal spot
(remove any paint
or grease if necessary) of the car
chassis.
If you add an optional noise suppressor, connect it as
far away from the unit as possible. Your Alpine
dealer
carries various noise suppressors, contact them for further
information.
Your Alpine dealer knows best about noise prevention
measures so consult
your dealer for further information.
o Power Supply Terminal
e Fuse (30A x 2)
USE ONLY THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to
do so may result in fire or electric shock.
e Speaker Output Terminals
Referring to "Cautions on speaker wire connections~. insert
the speaker wire into the speaker connector, which is then
inserted in the speaker output terminal.
Notes:
Fully ill~'ert the speaker COl/llector 10 al'oid poor connection. or
the wire comil/g loose due 10 vehide vibmtion. etc.
"The S!Jeaker
connector can be connected eilher way. reganJfess
ofpoilirity indiclition.
•
Do n01 connect speaker leads together or to chassis gl"Olll/d.
o RCA Input Jacks
Connect these jacks to the line out leads on your head unit
using
RCA extension cables (sold separately).
"
Battery Connector
Make the Battery, Remote Turn-on and Ground lead
connections (as shown) to the Battery Connector. Insert Plug
to Terminal 1.
Fig. 6
Fig.S
Fig. a
CD Battery Connector/Connecleur de la
batterie/Conector de bataria
@Hexagon screw (Large)Nis asix pans
(grande)fTornilio hexagonal (grande)
@Hexagon screw (Small)Nis asix pans
(petite)fTornilio hexagonal (pequeiia)
@Ground lead/Conducteur de mise ala
terre/Cable de tierra
®Remote turn-on leadiConducleur de
mise sous tension
teh~commandeel
Cable para encendido remola
®Battery lead/Conducteur de la balteriet
Cable de la bataria
CD Speaker connector/Connecteur du haul-
parleur/Conector de allavoz
@Hex screw hole/Orifice de la vis asix
panslAgujero de tornillo hexagonal
@Negative lead terminal hole/Orifice de la
borne du conducteur negatif/Agujero del
terminal del conductor negativo
@Speaker wire (negative)/Cable du
haut-parleur (negatif)/Cable del altavoz
(negativo)
®Positive lead terminal hole/Orifice de la
borne du conducteur positif/Agujero del
terminal del conductor positivo
®Speaker wire (positive)/Cable du
haut-parleur (positif)/Cable del altavoz
(positivo)
Wire Terminal/Borne de conducteur/
Terminal del conductor
C·)
G
~~~~~~=l@ (1)
Wire/Conducteur/Conductor 7-10 mm (9/32" -3/8")
II \
m Status Indicator
m. CD Crossover Frequency Adjustment Knob
Permits adjustment of the crossover frequency, by rotating the
knob to select any frequency between 30 to 400
Hz as the
crossover point.
Indication color Status Solution
Blue Amplifier circuit is normal.
Amplifier circuit is abnormal. An
electrical short
has occurred, or
supply current is too high.
Turn off the power supply and eliminate the cause. Then turn on the
unit and verify that the indicator color has changed to blue. If it remains
red, turn off the unit and consult
your dealer.
Red Ambient temperature is too high. Decrease the vehicle's interior temperature to anormal level. The
indicator color changes to blue.
Power supply voltage is too high.
Use the correct power supply voltage. The indicator color changes to
blue.
CONNECTION CHECKLIST (Fig.10)
Please check your head unit for the conditions listed
below: (Fig. 10)
a. The head unit does not have aremote turn-on or power
antenna lead.
b. The head unit's power antenna lead is activated only when
the radio is on (turns off in the tape
or CD Mode).
c. The head unit's power antenna lead is logic level output
(+) 5V, negative trigger (grounding type),
or cannot sustain
(+) 12V
when connected to other equipment in addition to
the vehicle's
power antenna. If any of the above conditions
exist, the remote
turn·on lead of your PDX-F6/F4 must
be connected to aswitched power source (ignition) in the
vehicle. Be sure to
use a 3A fuse as close as possible to
this ignition tap. Using this connection method, the PDX-
F6IF4 will turn on and stay
on as long as the ignition switch
is on.
If this is objectionable, a
SPST (Single Pole, Single Throw)
switCh, in addition to the
3A fuse mentioned above. may be
installed in-line on the PDX-F6/F4 turn-on lead. This switch will
then be used to turn on (and off) the PDX-F6/F4.Therefore,
the switch should be mounted so that is accessible by the
driver. Make sure the switch is turned off when the vehicle is
not running. Otherwise. the amplifier will remain on and drain
the battery.
CD BluelWhite
@Power Antenna
WRemote Turn-On Lead
@ To other Alpine components' Remote Turn-On Leads
® SPST Switch (optional)
®Fuse (3A)
o As close as possible to the vehicle's ignition tap
@Ignition Source

®
®
@
®
O--'-- __ ®_-J~ ®
W
Fig. 10
TYPICAL SYSTEM CONNECTIONS/CONNEXIONSTYPIQUES DU SYSTEME/CONEXIONESTIPICAS DEL SISTEMA
CD Head unit / Unite principale CD I Unidad principal de CD
(L) + + (R) (L) + + (R)
,.....,,-,' 'r"""1n'·
[English]
f) Center Speaker (sold separately)
fD Front Left Speaker (sold separately)
$Front Right Speaker (sold separately)
@l Rear Left Speaker (sold separately)
fJl Rear Right Speaker (sold separately)
@l Subwoofer (sold separately)
~ RCA Extension Cable (sold separately)
f) SpeakerConnector
~ Head Unit, etc.
il V-Adaptor (sold separately)
Qil Fiber Optic Cable (sold separately)
NOTES:
Please observe the following when using Fiber Optic Cable.
Do not coil the Fiber Optic Cable smaller than a30 mm
(1-3/16') radius.
Do not place anything on top of the Fiber Optic Cable.
[Franlfais]
f) Haut-parleur central (vendu separement)
fD Haut-parleur avant gauche (vendu separement)
$Haut-parleur avant droit (vendu separement)
@l Haut-parleur arriere gauche (vendu separement)
fJl Haut-parleur arriere droit (vendu separement)
@l Haut-parleur de sous-graves (vendu separement)
~ Cable d'extension RCA (vendu separement)
f) Connecteur du haut-parleur
il Unite principale, etc.
~ Adaptateur en forme de «Y »(vendu separement)
Qil Cable II libre optique (vendu separement)
REMARQUES:
Respecter les points suivants lors de I'utilisation d'un cable
II fibre optique.
Ne pas embobiner Ie cable II fibre optique avec un rayon
inferieur II 30 mm.
Ne rien placer sur Ie cable II fibre optique.
[Espanol]
f) Altavoz central (vendido separadamente)
fD Altavoz delantero izquierdo (vendido separadamente)
$Altavoz delantero derecho (vendido separadamente)
@l Altavoz trasero izquierdo (vendido separadamente)
fJl Altavoz trasero derecho (vendido separadamente)
@l Altavoz de subgraves (vendido separadamente)
~ Prolongador electrico RCA (vendido separadamente)
f) Conector de altavoz
@l Unidad principal, etc.
il Adaptador en forma de "Y" (vendido separadamente)
Qil Cables de fibra 6ptica (vendido separadamente)
NOTAS:
Observe 10 siguiente cuando utilice cables de fibra 6ptica.
•No bobine cables de fibra 6ptica mas pequenos que un
radio de 30 mm.
No coloque nada encima del cable de libra 6ptica.
5Speaker SystemlSysteme de 5haut-parleurs/Sistema de 5altavoces
Rear Left I Arriere gauche I Trasero izquierdo
. __ __ __ _ _-_ .. __ __ e.
l Rear Right / Arriere droit I Trasero derecho :
: :----------------------------_._------ ------- _ --------------------- ----------------_ _ t--:
l:, !:, :::, __ ._~~o.n:_~e.ft.~~~~~~~:~:~~!.~~I~~!:r~_i!~~~e!~~ .. _. . i:,
Front Right I Avant droit I Delantero derecho
"--,_.,,~ " ~ !,~~~~,.~,----------------------' I::::
Terminal de sortie arriere / Terminal de sortie avant I
Terminal de salida trasero Terminal de salida delantero
i·-~~~~~~~~~~~~~~~~~~~~~~~~~[~~l~~~~~i _
i ! . 1 __ ~ .. __ .: __
:: : :; ;;;
: : : r------------------T-Y----T-------f
r
l~~~;O;:::::*~~~~~~IJ I I I I
I I , I
--: iii
~~r~~~:';;eO~~~~ ~~~~~~oofer I (L) r, T, (R) • __ ::l:~::l:~::~:~::~:~::~:~::~:~::~:~::~:~::~:~:(p:~:D~:X:~"-'~·F~6~0~r~p~DJx· b-.-Fj-4)·--·~+~' e :,; 'i'2
e
:,;
Terminal de salida del subwoofer ';rJ v
~ X (R) ~--~_ •• ~::::.-
~i2
,',
I .. __ ,} l. _
i.. __ : .. ---------------f .. -::::j-------------! @t
: :~
: : ®Qe
I : I
!4
, ~.~~
'._--_ .. -----------------------------------------------._---------------_.
(PDX-M12 or PDX-M6)
Fig. 11

3Speaker SystemiSysteme de 3haut·parleursiSistema de 3altavoces 5.1 channel Speaker SystemiSysteme de haut·parleurs 5,1 cannauxlSistema de altavoces 5,1 canales
ImportantTips on Bridging
an Amplifier/Conseils importants lors de la mise en pont d'un amplificateurl
Consejos importantes cuando conecte en puente un amplificador
(PDX-F6 or PDX-F4)
o
~
~:.~
. ... 0, ...
<Monitorl
Moniteurl
Monitor>
<Tuner Box!
BoWer du lunerl
Caja del sintonizador>
liS Head unit (sold separately) I
Unite principale lIS (vendu separement) I
Unidad principal de lIS (vendido par separado)
Fiber digital outpulterminaV ~~::::r=========~
Borne de sortie de fibre numeriquel r:
Terminal de salida de libra digital ~
(PDX-M12 or PDX-M6)
'--------.
! Rear left I Arriere gauche I Trasero izquierdo •••••••••••••••••••• ,
r·-:_-_-_-_-_-_-_-_-_·_·_·_~·_T·_~¥~~~R2~~li);~r!~r§_~~ 02~i_~riii~~·§§!!::.~~~·_·_·_·_~·1 ! f-;:::::::::::::::~:::::::::::~------------!
: : ! Frontlefl/Avantgauche/Delaoteroizquierdo : : : : : .-------------~-----------
Rearoutputtermin~11 x!! Xr·~~~~~~~~!~~~~~~~~~I:i~!~~!P.~~~~;!i.~~;ii~i.~~~i····imnmoo " iii i K~ I ~"O e
Borne de sortie arnere Ia:. a:. Borne de sortie avant I :: : :: " :
Terminal de salida ~ ~ Terminal de sahda Flberdl~ltallnputtermlOall :B II> ·J...!_·~ffi- ·B: ,--.!:--.
trasero delantero Borne d entree de fibre ,~ 0,.: ~ ~_ ~
numenquelTermlOalde : ~ . . of> " • W
., " • entrada de hbra digital : -- , • : ~ , fJ) •
(l) l l(Ail) AA (A) ii (PDX·F6 or PDX·F4) @) Ui .~ll~
Ai-NET/Fiber digital compatible audio processor (sold : ~"".--.--:::J -!, ~ ~ ~
separately) I Audio processeur numerique compatible Ai-NET ~ w'1:1
(vendu separement) I Processador audio digital compatible :, ' •• -' I •••
Ai-NET (vendido por separado) f~':::::::::::::::::;·1
~~~;.o~~e;~r~~~~ut~~~~~~;erl{ll~x!' !(AI ! ~~~~~r~eu~~:i~e;~;~~; l .. EP8·ijijij~:.·E:::::!.::i:·:~+:~.::e:::::::·····; ~e
TermlOal de salida del subwoofer Terminal de salida central 0 ~:: .$L1c \BYE
(PDX-F6 or PDX-F4) :~. ~ : : •••• : :
@l @l uuu.uu ..... uuu.uu~~~~~~~~~~~~~~~~~~~~~~~~~umo U .mmm.m.mfi·m.m .. '
@) ~
i , @.e
l·t~·_~~~~~~~~·.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~·.~~·.~~B.~~~~j~·Bnmmum.mm.
NOTA:
Las dificultades siguientes pueden ocurrir
cuando no esta conectado correctamente.
1) Entrada de un solo lado ocasionando
una salida baja.
2) Entrada de un solo lado ocasionando
fallos.
3) La entrada de
un solo lado puede
producir mas calor ydar lugar as! a
una operaci6n
mas temprana de la
protecci6n de recalentamiento.
Improper connection!
Connexion
incorrecte/Conexi6n
incorrecta
,
if-----
il :: __ :·························1
x
REMARQUE:
Les difficultes suivantes peuvent se produire
quand il n'est pas correctement relie.
1) Entree d'un saul cote causant una sortie
basse.
2) Entree d'un seul cote causant une
panne.
3) L:entree d'un seul cote peut causer
plus de chauffage et avoir ainsi comme
consequence I'operation plus tot de la
protection
de surchautfe.
~
~
(A) ee
C!JC~.aYlll
(l)
: ,---------------------------------------------- ---------j
U Front output terminal I
~ n i:~~:~::~: ~~~~~ ~~~~{ero l
(l) i i (AI I
~~ ~6ad unit I Unite prinCi~::e CD{~~nidad pri.n.C .. i.p.a ..II .'
~~r:~~r~eO~t~~ ~~~~;~Ofer Ii! ; ..
Terminal de salida del subwoofer ~ ~ (A) ..t ..
, :::.U ••.............. §:·~l:~~:B
O
Proper connection!
Connexion
correcteiConexion
correcta
NOTE:
The following troubles may occur when it is
not properly connected.
1) One side input results in low output.
2) One side input will cause failure.
3) One side input may cause more healing
and thus result in the earlier operation of
overheating protection.
~EiB
(A) ee
C!JC~.,,)"1ll
(l)
(Doe signal I Un signal I Una sanal)
~
~
(AI e
C!JC~1ll
(ll
{One signal I Un signal I Una senal)
Fig. 12 Fig.
13

Verification Certificate
Load Impedance: 40hms
Test Voltage: 14.4V D.C.
•
Model :PDX-F6
Serial:
Date:
-ACTUAL TEST MEASUREMENT
•TEST •SPECIFICATION • ACTUAL
Output Power{RMS) 150 W min. (Full-Range) W
(Per Channel)
ALPINE ELECTRONICS, I C.

NO POSTAGE
NECESSARY
IF MAILED
INTHE
UNITED STATES
BUSINESS REPLY MAIL
FIRST-CLASS MAIL PERMIT NO. 320 TORRANCE CA
POSTAGE WILL BE
PAID BY ADDRESSEE
ATIENTION MARKETING SERVICES
ALPINE ELECTRONICS OF AMERICA INC
PO BOX 2859 .
TORRANCE
CA 90509-9939
11,1"11,,,11111111111111,1,11,1,11,1,1111,1,,11,111
i FOR USE IN USA, PLEASE FOLD HERE AND ENSURE THAT
AMERICAN ADDRESS FACES UP.
·dn S3:::>\f.::l SS31::100\f N\fIO\fN\f:::>
1\fH131::1nSN3 ON\f 31::13H mo.::l 3S\f31d "v'O\fN\f:::> NI 3sn l::lO.::l 1
1'111'1'11111'1111111111'111"""11111111'111'11'11
v::m:13l1\1V ~o S3.lV.lS 03.llNn
9L86-~0906 V':J 3':JNVtltlO.l
ld A':Jtl3l1\1Vt18 gv~6~
S':JINOtl.l':J313 3NldlV
.... AI III._1IM_!SIlI
mid JSNOcIJIII1I1W Alt08 SSJNISDB liNOllIN8UNI
-. mllS_
11101
IImII
lllSUlll
1II1Sl10101 _
II I II
OZE OlIN 1II:J31Sl181
muIll!J!rn
DI!II!I

~/iLPINE. Customer Care Registration ~ For easy on-line registration, go to
en
m
»
r-
J:
m
:J:I
m
Model Vear: _
Purchased
Vear: _
oHousehold Income
1.0 Less than $30,000 4.0 $70,000 -$90,000
2.0 $30,000 -$50,000 5.0 $90,000 -$110,000
3.0 $50,000 -$70,000 6.0 Over $110,000
OType of vehicle in which this unit is installed.
Make: Model: _
oHow was this vehicle purchased?
1. 0Bought 2. 0Leased
oWhen you purchased this Alpine unit, did you
compare it with other brands?
1. ovest 2.0No.
(Brand Name) _
OWhich of the following statements best describes you?
1.0 Iusually have more electronic equipment than my friends
2. 0 I am usually one of the first of my friends to buy the newest
electronic equipment
3.0 Iusually wait until aproduct has been out for awhile before
Ipurchase it
4.0 I am usually on of the first of my friends to know about the
newest car
5.0 Iusually know more about cars than my friends
c)
0Occupation
1.0 Executive/Managerial 6. ~ EngineeringlTechnical
2. ~ Secretarial/Clerical 7. Farming/Fishing
3. Sales 8. Retired
4. General Labor 9. Student
5. Professional 10.0 Other _
9. 0Monitor Controller
10.0 Video Monitor
11 .0 Navigation
12.0 Mobile Mayday
13. 0Video Tape Player
14.0 Processor/Equalizer
15.0 Security
16.00ther _
oModel Number: _
OSerial Number: _
oDate of Purchase:
c)
Month: Vear:
oIf navigation system, which monitor?
1.0 Alpine --> (Model No.)
------------
2.0 Other --> (Brand Name)
------------
oPurpose of buying this unit?
1.0 Addition
2.0 Replacement --> * Previous brand replaced?
1.0 Factory installed
2.0 Alpine
3.00ther _
oHave you purchased Alpine products before?
1.0 First time 2.0 Two or more times
1.0Ves 2.0No
State/Provo Zip Code
May we contact you at this address? 1.0Ves 2.0 No
City
Home address: "'St=ree"'t:::ad""d,:::es:::-s -----------
Phone number: (
------------==----=~
May we contact you at this number? 1.0Ves 2.0 No
E-mail Address:
----------;=~----=;--
Last name: _
May we contact you bye-mail?
oGender 1.0 Male 2.0 Female
oDate of Birth Month: Vear:
=----
oMarital Status 1.0 Single 2.0 Married
OWhich ethnicity best describes yourself:
1.0 Caucasian 4.0 Asian
2.0 Hispanic 5.0 Other _
3. 0African-American
OYour highest level of education completed:
1. 0High School Student
2.0 High School Graduate
3.02 Vr. Degree/Some College
4. 0Completed 4 Vr. College
5.0 Completed Graduate School
Thank you for choosing Alpine! Please register your product with us so we can serve you better.
First name: 0Product purchased
1.0 Cassette Player
2.0 CD Player
3.0 MD Player
4. 0 DVD Player
5. 0 CD Changer
6.0 Amplifier
7.0 Speaker
8. 0Subwoofer
w
a:
w
J:
..oJ
<t
w
en
Thank you for your cooperation! We value your privacy. This information will remain confidential with Alpine and its affiliates.
Customer Care Registration is for Product registration.
Failure to complete and return this card does not diminish your warranty rights.
PART NO. 68P04190K17-A
M3544084010

~/iLPINE®
GARANTIE LlMITEE
Fideles aleur engagement de ne fournir que des produits de qualite, ALPINE ELECTRONIOUE DE L'AMERIOUE, INC. et
ALPINE ELECTRONIOUE
DU CANADA, INC. (Alpine) sont heureuses de vous offrir cette garantie. Nous vous suggerons de Ie
lire attentivement et en entier. Si vous avez la moindre question, veuillez contacter I'un de nos concessionnaires ou appeler
directement Alpine aux numeros listes ci-dessous.
®Vous devez donner une description detaillee des
problemes qui sont aI'origine de votre demande de
reparation.
®Vous devez joindre la preuve de votre achat du produit.
@Vous devez emballer soigneusement Ie produit pour eviter
tout dommage durant son transport. Pour eviter la perte
de I'envoi,
il est conseille de choisir un transporteur qui
propose un service
de suivi des envois.
eLiMITATION DES GARANTIES TACITES
LA DUREE DE TOUTES LES GARANTIES TACITES, Y
COMPRIS LA GARANTIE D'ADAPTATION AL'UTILISATION
ET LA GARANTIE
DE OUALITE LOYALE ET MARCHANDE,
EST
L1MITEE ACELLE DE LA GARANTIE EXPRESSE
DETERMINEE CI-DESSUS. PERSONNE N'EST AUTORISE
AENGAGER AUTREMENT LA RESPONSABILITE D'ALPINE
EN VERTU DE LA VENTE D'UN PRODUIT.
.EXCLUSIONS DE LA GARANTIE
ALPINE STIPULE EXPRESSEMENT OU'ELLE N'EST PAS
RESPONSABLE DES DOMMAGES-INTERETS ET
DOMMAGES INDIRECTS PROVOOUES PAR
LE PRODUIT.
LES DOMMAGES-INTERETS SONT LES FRAIS DE
TRANSPORT
DU PRODUIT VERS UN CENTRE DE
SERVICE ALPINE, LA PERTE DE TEMPS DE L'ACHETEUR
ORIGINAL, LA PERTE D'UTILISATION
DU PRODUIT, LES
BILLETS D'AUTOBUS, LA LOCATION
DE VOITURES ET
TOUS LES AUTRES FRAIS LIES ALA GARDE
DU
PRODUIT.
LES DOMMAGES INDIRECTS SONT LES FRAIS DE
REPARATION
OU DE REMPLACEMENT D'AUTRES BIENS
ENDOMMAGES SUITE
AU MAUVAIS FONCTIONNEMENT
DU PRODUIT.
LES RECOURS PREVUS PAR LES PRESENTES
EXCLUENT ET REMPLACENT TOUTE AUTRE FORME DE
RECOURS.
ellEN ENTRE LA GARANTIE ET LA LOI
La garantie vous donne des droits specifiques, mais vous
pouvez aussi jouir d'autres droits, qui varient d'un etat ou
d'une province aI'autre.
En outre, certains etats et certaines
provinces interdisent de limiter la duree des garanties tacites
ou d'exclure les dommages accessoires ou indirects. Dans ce
cas, les limites et les exclusions de la garantie peuvent ne pas
s'appliquer avous.
eCLAUSE APPLICABLE AU CANADA SEULEMENT
Pour que la garantie soit valable, il faut qu'un centre
d'installation autorise ait installe
Ie systeme audio pour I'auto
dans votre vehicule et qu'il ait ensuite appose son cachet sur
la garantie.
eNUMEROS D'APPEL DU SERVICE A. LA CLIENTELE
Si vous avez besoin de nos services, veuillez appeler Alpine
aux numeros ci-dessous pour
Ie centre de service autorise
Alpine
Ie plus proche.
.PRODUITS COUVERTS PAR LA GARANTIE
Cette garantie couvre les produits audio de voiture et les
accessoires connexes ("Ie produit"). Elle ne couvre les
produits que dans
Ie pays ou ils ont ete achetes.
eDUREE DE LA GARANTIE
Cette garantie est en vigueur pendant un an apartir de la date
du premier achat du client.
ePERSONNES PROTEGEES PAR LA GARANTIE
Seul I'acheteur original du produit, s'il resisde aux Etats-Unis,
aPorto Rico ou au Canada, peut se prevaloir de la garantie.
.CE QUI EST COUVERT
Cette garantie couvre tous les defauts de materiaux et de
fabrication (pieces et main d'oouvre) du produit.
• CE QUI N'EST PAS COUVERT
Cette garantie ne couvre pas ce qui suit:
CD Les dommages survenus durant Ie transport des produits
renvoyes aAlpine pour etre repares (Ies reclamations
doivent etre adressees au transporteur);
@Les degats provoques par un accident ou une mauvaise
utilisation, ycompris des bobines acoustiques grillees
suite aune surexcitation des enceintes (augmentation
du niveau
de I'amplificateur jusqu'a atteindre un effet de
distorsion ou d'ecretage), une defaillance mecanique
des enceintes (perforations, dechirures ou fentes),
panneaux LCD fissures ou endommages, disques durs
endommages ou ayant subi une chute.
®Tout degat provoque par negligence, usage inapproprie,
mauvaise utilisation ou par
Ie non-respect des
instructions indiquees dans
Ie manuel de I'utilisateur.
@Les dommages dus a la force majeure, notamment aux
tremblements de terre, au feu, aux inondations, aux
tempetes ou aux autres cataclysmes nature
Is;
Les frais ou les depenses relatifs aI'enlevement ou ala
reinstallation
du produit;
rID Les services rendus par une personne, physique ou
morale non autorisee;
®Les produits dont Ie numero de serie aete efface, modifie
ou retire;
(j) Les produits qui ont ete adaptes ou modifies sans Ie
consentement d'Alpine;
®Les produits qui ne sont pas distribues par Alpine aux
Etats-Unis, aPorto Rico ou
au Canada;
®Les produits qui n'ont pas ete achetes par I'entremise d'un
concessionnaire Alpine autorise;
.COMMENT SE PREVALOIR DE LA GARANTIE
CD II vous faut remettre Ie produit necessitant des reparations
a un centre de service autorise Alpine ou aAlpine meme et
en assumer les frais de transport. Alpine a
Ie choix entre
reparer
Ie produit ou Ie remplacer par un produit neuf ou
revise, Ie tout sans frais pour vous. Si les reparations sont
couvertes par la garantie et
si Ie produit aete envoye a un
centre de service Alpine ou aAlpine, Ie paiement des frais
de reexpedition du produit incombe Alpine. AUDIO
DE VOITURE
NAVIGATION 1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
Ou visitez notre site Web aI'adresse http://www.alpine-usa.com
ALPINE ELECTRONIOUE DE L'AMERIOUE, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONIOUE DU CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
N'envoyez aucun produit
aces adresses.
Appelez notre numero gratuit ou visitez notre site Web
si vous recherchez un centre de service.

/ffff/ILPINE®
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality
craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any
questions, please contact your Dealer or contact Alpine at one of the telephone numbers listed below.
.PRODUCTS COVERED:
This Warranty covers Car Audio Products and Related
Accessories ("the product"). Products purchased
in the
Canada are covered only
in the Canada. Products
purchased
in the U.S.A. are covered only in the U.S.A.
.LENGTH OF WARRANTY:
This Warranty is in effect for one year from the date of the
first consumer purchase.
.WHO IS COVERED:
This Warranty only covers the original purchaser of the
product, who must reside
in the United States, Puerto Rico
or Canada.
•WHAT IS COVERED:
This Warranty covers defects in materials or workmanship
(parts and labor)
in the product.
.WHAT IS NOT COVERED:
This Warranty does not cover the following:
CD Damage occurring during shipment of the product to
Alpine for repair (claims must be presented to the
carrier).
®Damage caused by accident or abuse, including burned
voice coils caused by over-driving the speaker (amplifier
level is turned up and driven into distortion or clipping).
Speaker mechanical failure (e.g. punctures, tears or
rips). Cracked or damaged LCD panels. Dropped or
damaged hard drives.
@Damage caused by negligence, misuse, improper
operation or failure to follow instructions contained in the
Owner's manual.
@Damage caused by act of God, including without
limitation, earthquake, fire, flood, storms or other acts of
nature.
Any cost or expense related
to the removal or
reinstallation of the product.
®Service performed by an unauthorized person, company
or association.
®Any product which has the serial number defaced,
altered or removed.
(J) Any product which has been adjusted, altered or
modified without Alpine's consent.
®Any product not distributed by Alpine within the United
States, Puerto Rico or Canada.
®Any product not purchased from an Authorized Alpine
Dealer.
.HOW TO OBTAIN WARRANTY SERVICE:
CD You are responsible for delivery of the product to an
Authorized Alpine Service Center or Alpine for repair
and for payment of any initial shipping charges. Alpine
will, at its option, repair or replace the product with a
new or reconditioned product without charge. If the
repairs are covered by the warranty, and if the product
was shipped to an Authorized Alpine Service Center or
Alpine, Alpine will pay the return shipping charges.
®You should provide adetailed description of the
problem(s) for which service is required.
@You must supply proof of your purchase of the product.
@You must package the product securely to avoid
damage during shipment. To prevent lost packages it is
recommended to use acarrier that provides atracking
service.
.HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR
USE AND MERCHANTABILITY ARE LIMITED
IN
DURATION TO THE PERIOD OF THE EXPRESS
WARRANTY SET FORTH ABOVE AND NO PERSON
IS
AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER
LIABILITY
IN CONNECTION WITH THE SALE OF THE
PRODUCT.
.HOW WE EXCLUDE CERTAIN DAMAGES:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR
INCIDENTAL AND CONSEQUENTIAL DAMAGES
CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL
DAMAGES" REFERS TO EXPENSES OF
TRANSPORTING THE PRODUCT TO THE ALPINE
SERVICE CENTER, LOSS OF THE ORIGINAL
PURCHASER'S TIME, LOSS OF THE USE OF THE
PRODUCT, BUS FARES, CAR RENTALS OR OTHERS
COSTS RELATING TO THE CARE AND CUSTODY OF
THE PRODUCT. THE TERM "CONSEQUENTIAL
DAMAGES" REFERS TO THE COST OF REPAIRING OR
REPLACING OTHER PROPERTY WHICH
IS DAMAGED
WHEN THIS PRODUCT DOES NOT WORK PROPERLY.
THE REMEDIES PROVIDED UNDER THIS WARRANTY
ARE EXCLUSIVE AND
IN LIEU OF ALL OTHERS.
.HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may
also have other rights which vary from state to state and
province to province. In addition, some states/provinces do
not allow limitations on how long an implied warranty lasts,
and some do not allow the exclusion or limitation of
incidental or consequential damages. Accordingly,
limitations
as to these matters contained herein may not
apply to you.
.IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio
product has been installed
in your vehicle by an Authorized
Installation Center, and this warranty stamped upon
installation by the installation center.
.HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
CAR AUDIO 1-800-ALPINE-1 (1-800-257-4631)
NAVIGATION1-888-NAV-HELP (1-888-628-4357)
Or visit our website at; http://www.alpine-usa.com
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate aservice center. 68-00493Z72-A (Y)
M3544091010