Alpine PWE-58 User manual

FOR
VEHICLE
USE
ONLY/
POUR
UNE
UTILISATION
A
t:INTERIEUR
D'UN
VEHICULE
UNIQUEMENT/SOLO
PARA
VEHlCULOS
PWE-58
COMPACT
POWERED
8"
SUBWOOFER
• OWNER'S MANUAL
Please read this manual to maximize your enjoyment
of
the outstanding performance and feature capabilities
of
the equipment, then retain the manual for future
reference.
• MODE D'EMPLOI
Veuillez lire ce mode d'emploi pour tirer pleinement
profit des excellentes performances et fonctions de cet
appareil, et conservez-le pour toute reference future.
• MANUAL DE OPERACION
Lea este manual, por favor, para disfrutar al maximo
de las excepcionales prestaciones y posibilidades
funcionales que ofrece el equipo, luego guarde el manual
para usarlo como referencia en el futuro.
ALPINE
ELECTRONICS,
INC.
1-7,
Yukigaya-Otsukamachi, Ota-ku
Tokyo 145-0067, Japan
Tel.: [phone]
ALPINE
ELECTRONICS
OF
AMERICA,
INC.
19145 Gramercy Place
Torrance, California
90501
U.S.A.
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
ALPINE
ELECTRONICS
OF
AUSTRALIA
PTY.
LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Tel.: [phone]
ALPINE
ELECTRONICS
DE
ESPANA,
S.A.
Portal de Gamarra 36, Pabell6n, 32
01013
Vitoria (Aiava).
APDO 133, Spain
Tel.: [phone]
ALPINE
ELECTRONICS
GmbH
Wilhelm-Wagenfeld-Strase
1-3
80807 Munchen, Germany
Tel.: [phone]
ALPINE
ELECTRONICS
OF
U.K.,
LTD.
Alpine House Earlplace Business Park
Fletchamstead Highway,
Coventry CV4 9TW, United Kingdom
Tel.: [phone]
ALPINE
ELECTRONICS
FRANCE
S.A.R.L.
98, Rue de
Ia
Belle Etoile, Z.l. Paris Nord II,
B.P.
50016, 95945 Roissy Charles de Gaulle
Cedex, France
Tel.: [phone]
.
ALPINE
ITALIA
S.p.A.
Viale
C.
Colombo
8,
20090 Trezzano Sui
Naviglio (MI), Italy
Tel.: [phone]

ENGLISH
Introduction:
Please read this OWNER'S MANUAL thoroughly to familiarize yourself with each control and function. We at
ALPINE hope that your new PWE-S8 will give you many years of listening enjoyment.
In
case
of
problems when installing your PWE-S8, please contact your authorized ALPINE dealer.
CAUTION:These controls are for tuning your system. Please consult your authorized Dealer for
adjustment.
~WARNING
This symbol means important instructions.
Failure to heed them can result
in
serious injury or death.
~CAUTION
This symbol means important instructions.
Failure to heed them can result
in
injury
or
property damages.
~WARNING
•
DO
NOT OPERATE ANY FUNCTIONTHATTAKESYOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE. Any function that requires your prolonged attention should only be perfonned after coming to a
complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in
an accident.
• KEEPTHE VOLUME
AT
A LEVELWHEREYOU CAN STILL HEAR OUTSIDE NOISESWHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency vehicle sirens
or
road warning signals (train crossings,
etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO
CAUSE HEARING DAMAGE.
•
DO
NOT
DISASSEMBLE OR ALTER. Doing
so
may result in an accident, fire
or
electric shock.
• USETHIS PRODUCT FOR MOBILE 12VAPPLICATIONS. Use for other than its designed application may
result in fire, electric shock
or
other injury.
• USETHE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or
electric shock.
•
DO
NOT
BLOCKVENTS
OR
RADIATOR PANELS. Doing so may cause heat to build
up
inside and may result
in fire.
•
MAKE
THE
CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product
damage.
• USE ONLY IN VEHICLES WITH A 12VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.)
Failure to do so may result in fire, etc.
• BEFOREWIRING, DISCONNECT
THE
CABLE FROMTHE NEGATIVE BATTERYTERMINAL. Failure to do so
may result in electric shock or injury due to electrical shorts.
•
DO
NOT
ALLOW CABLESTO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and
cables in compliance with the manual to prevent obstructions when driving. Cables
or
wiring that obstruct or
hang
up
on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.
• DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of the wire and result in fire
or
electric shock.
• DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes
in
the chassis for
installation, take precautions so as not to contact, damage
or
obstruct pipes, fuel lines, tanks or electrical wiring.
Failure to take such precautions may result in fire.
• DO NOT USE BOLTS OR NUTS IN
THE
BRAKE OR STEERING SYSTEMSTO MAKE GROUND
CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system),
or
tanks should NEVER be used for installations
or
ground connections. Using such parts could disable control of
the vehicle and cause fire etc.
• KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS
OUT
OF
THE REACH
OF
CHILDREN. Swallowing
them may result in serious injury. If swallowed, consult a physician immediately.
~CAUTION
• HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury
or
damage
to the product. Return it to your authorized Alpine dealer or the nearestAlpine Service Center for repairing.
• HAVE
THE
WIRING AND INSTALLATION DONE
BY
EXPERTS. The wiring and installation
of
this unit requires
special technical skill and experience.
To
ensure safety, always contact the dealer where you purchased this
product to have the work done.
• USE SPECIFIED ACCESSORY PARTS AND INSTALL
THEM
SECURELY. Be sure to use only the specified
accessory parts. Use
of
other than designated parts may damage this unit internally
or
may not securely install
the unit in place. This may cause parts to become loose resulting in hazards or product failure.
• ARRANGETHE WIRING
SO
IT
IS NOT CRIMPED OR PINCHED
BY
A SHARP METAL EDGE. Route the
cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent
crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent
the wire's insulation from being cut by the metal edge
of
the hole.
• DO
NOT
INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit
in
locations with
high incidence of moisture
or
dust. Moisture
or
dust that penetrates into this unit may result in product failure.

SERVICE CARE
+ IMPORTANT NOTICE
This Amplifier has been type tested and found to
comply with the limits for a Class B computing device in
accordance with the specifications in Subpart J of Part
15 of FCC Rules. This equipment generates and uses
radio frequency energy, and it must be installed and
used properly in accordance with the manufacturer's
instructions.
+ For European Customers
Should you have any questions about warranty, please
consult your store of purchase.
+ For Customers in other Countries
IMPORTANT NOTICE
Customers who purchase the product with which this
notice is packaged, and who make this purchase
in
countries other than the United States ofAmerica and
Canada, please contact your dealerfor information
regarding warranty coverage.
SPECIFICATIONS
NOTE:
SERIAL NUMBER:
INSTALLATION
DATE :
INSTALLATION TECHNICIAN:
PLACE
OF PURCHASE:
+IMPORTANT
Please record the serial number of your unit in the
space provided here and keep it as a permanent
record.
The serial number plate is located on the rear
of the unit.
• Forproduct improvement, specifications and design are subject to change without notice.
ACCESSORIES
• Mounting Bracket.. .. ..... .. .......... .. ............ .. .. ......................... .. .. .. .. ......... .... ..................................... .. .. ...............................4
• Bracket Screws...................................... .
.
.. ....... .. .. ......... .. ..... .. ... .. ... .. ......... .. .. ................. .. ......... .. .............. .. ...... .......... ... .8
• Fuse (15A) . ...... .................. .. .. .. . ........ .. .. .................. ...... .. .. ... .... ....... ................. ...... .. .. ...... . ........ ................. .. . ... . .... .. . .... . .... .. . ....... . .. .1
• lnpuVPowerWire Harness... .. .......... .... ........ .. . .. ....................... .. . .. ................................... .. .... ... ....... ...................................... .......1
• Remote Bass Level Knob ........
.. ........................ .. ...... .. ... .. .................................. .. ............ .. .................. .. . .. .. ............... .. ... .. .............1
• Velcro.
.. . .. ................. .. ............ .... .. .............. .. ...................................................... .. .............. .. ... .... .. .................................................. 1
INSTALLATION (Fig. 1) & (Fig. 2)
&cAUTION
+ Caution on connection terminals/parts
• Keep electrically conductive objects away from the unit's terminals/parts (power terminals, fuses, speaker input
terminals, RCA connectors, etc.). Doing so prevents a possible short circuit and damage to the unit.
MOUNTING
1. Attach the included mounting brackets to the PWE-S8 with the supplied screws. (See to Fig. 1)
2. Once the brackets are mounted to the PWE-SB. Place the subwoofer in the desired location within the
vehicle. Before securing with screws, check to make sure all screws can affix to a structurally solid surface
while avoiding vehicle wiring, components, etc. (See F
ig. 2)
Note: Forsecuring the mounting brackets to the vehicle,
it may be necessary to use longerscrews (not
included) to accommodate carpetthickness, etc.
NOTE:
To sec ur ely co nn ec t the ground lead, use an already installed sc r ew on the metal part of the ve hicl e ( mark ed *). Be s ur e
this is a
go od ground by ch ec king continuity to the battery (-) termina l. As much as po ssible connect all equipme nt to the
sa me groundpoint. These procedures willhelp eliminate noise.

®
c::r
Velcro
Apply
Velcro
(included)
d
to
the
flat
bottom
surface
of
the
remote
bass
level
knob
Appliquez
le
velcro
(inclus) sur
Ia
surface
plane inferieure
du
bouton
de
niveau des
basses
a
distance
Aplique velcro
(incluido) a
Ia
superficie plana
de
Ia
parte posterior
del
Interrupter
remoto
del
nivel
de
graves
CD
,,
I '
I
......-a-
I
~
I
I I
I I
I I
I I
I I
I I
I I
I I
, I
~.
'T
CD
Mounting Bracket I Support de fixation I Escuadra de montaje
(2)
Bracket Screws I Vis de fixation I Tornillo autorroscante
® Attachment Method Of Remote Bass Level Knob/
Methode d'installation du bouton de niveau des basses a
distance/
Metoda de fijaci6n dellnterruptor remota del nivel de graves
Fig.
1
*
<(>
Fig.
2

Speaker Input Leads
Fils d'entree des haut-parleurs 5
Cables de entrada de Ia bocina
2 1
....__,_
'f{'@ ~•m•w•~ ~· ~-~
@ .®.®.:~ ~J=l · ~ :
a " !ICII< 1-Mtl MA.ll ·~~~L~- _ ..., _~
::;: @ 0 L_J -I
11 "' c '"" ""'"
REM POMRMOOE
I
1 11 1 I ~ ~ I 4
I
eaker (White (+))
avant gauche (B lanc(+ ))
ntero izqu i erdo (Bl anco(+ ))
aker (White/Bla ck H)
8
avant gauche (Blanc/Nair Hl
ntero derecho (B l anco /N egro(-))
peaker (Gray (+))
Ground Lead (Black) c
avant droit (Gris (+)) Fit
de mise aIa ter re (Nai r)
Front Left Sp
Haut-parleur
Altavoz
dela
Front Left Spe
Haut-parleur
Altavoz
dela
Front RightS
Haut-parleur
Al
tavoz dela
F ront RightS
Haut-parleur
Altavoz
dela
ntero derecho ( Gri s ( +))
Conducto r de p ue s ta a tierra (Negro}
7
peaker (Gray /B la ck( - ))
avant droit(Gris/Noir (- ))
ntero izqu~o {Gris/Negro (-))
te Tum-On Le ad (Bi uei\'V hite) Remo
Fil de
Cable
mise en marche adistance (Bieu/Bianc)
para encend ido rem ota (Azul /B lanco)
ery Lead (Red)Batt
Fil d
Cond
e Ia baHerie (R ouge )
uctor de Ia baterfa (Raja)
6
Fig.3
CONNECTIONS (Fig. 3)
Before making connections, be sure to turn the power off to a ll
audio components. Connect the red battery lead from the amp
directly to the positive(+) terminal of the vehicle's batter
y. Do
not connect this lead to the fuse block.
&cAUTION
+ Caution on connection terminals/parts
Keep electrically conductive objects away from the unit's
terminals/parts (power terminals, fuses, speaker output
terminals, RCA connectors, etc.). Doing so prevents a
possible short circuit and damage to the uni
t.
To preventexternal noise from entering the audio sys tem.
Locate the unit and route the leads at least
10 em (3-
15/16") away from the car harness.
Keep the battery power leads as far away from other leads
as possible.
Connect the ground lead securely to a bare metal spot
(remove any paint orgrease if necessar
y) of the car
chassis.
You rAlpine dealer knows best about noise prevention
measures so consult your deal
er for furt he r information.
Input/Power
Connector
2 RCA Input Jacks
Connect these jacks to the line out leads on your headunit
using RCA
ex tensi on cables (sold separately).
3 Fuse (15A)
USE ONLY THE CORRECTAMPERE
RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire
or electric shock.
4 Input/PowerWire Harness
5 Speaker
Input Leads
These leads are input leads for use with head units not
equipped with preamp outputs.When not using the R
CA
Line Input connectors, you should connect these wires to
the speaker output leads of your head uni
t. The PWE-SB
accepts input from
hi gh power or standard power head
units.
Note:
Do not connect speaker leads togeth er or to chassis ground.
u,e either RCA line level or sp eaker level inp ut s. Do not co nnect
ii:;:;::== • ....__iili~ k ~ ; ii :i;; :;;;;~~ii;i : nr;;;iiii ~ iiii ~ :;l<~~~l!'.tH 4i:ll a!t1ffi:iH¥. ft.ii 5:Yff both at the same time.
. il:l ~ --llllfi 1ll '-- lilil-ii'Jiil!liil!il !l:ll i!. ,
6 Battery Lead (Red)
Connect battery lead directly to
BATI +
Be sure to add a 15A fuse (sold separately) as close as
possible to the battery's (+)terminal.
7 RemoteTurn-On Lead (Blue/White)
Connect this lead to the remote turn-on (positive trigge r,
(+) 12Vonly) lead of yourhead unit.
Note:
If usingspeakerinput level si gn al jro m the he ad uni t, remote
turn·on l
ead connection is notnecessary. Please make sur e
"Po
we r Mode" button is set to SPIN (Button In).
8 Ground Lead (Black)
Connect this lead securely to a clean, bare metal spot on
the vehicle's chassis. Verify this point to be a
tr ue ground
by checking for continuity be
tw een that point and the
negative (-) terminal
of the vehicle's battery. Ground all
your audio components to the same point on the chassis to
prevent ground loops.

PWE-58
connection
panel/panneau
de
droite/panel
de
Ia
derecha
9 0 A B
/ I
I
v@)@.@
00
1~
1
""'
O
50Hz
150Hz~
MAX
Q
0010
a'
© 0
Ct11
({)
CH2
POWER
SPEAKSl
I
II
:;:
· L
~
J
H'UT
I
SUB
CJSPIN
ORE
..
REM
POWEI'IMOOE
I I
C D
Fig.4
PWE-58
Right
end
panel/panneau
de
droite/panel
de
Ia
derecha
I I
I
I
CD
I
~®
-
I -I
PWE-88 ®
®
\I/
@
I (j)
®
Fig.S
~
SWITCH SETTINGS (Fig. 4)
9 Phase switch
oo
to 180°
Subwoofer output phase can be set to Subwoofer Normal
oo(Button Out)
or
Subwoofer Reverse 180° (Button In).
0 Crossover Frequency Adjustment Knob (LP FILTER)
Use this control to adjust the crossover frequency between
50 to 150Hz.
A Input Gain Adjustment Control
Note:
If
the Remote Bass Level Knob will
be
connected
in
your system, make sure
to
rotate the knob fully clockwise
(set
to
"+") before making the input gain adjustment.
Set the PWE-S8 input gain to the minimum position. Using
a dynamic CD as a source, increase the head unit volume
until the output distorts. Then, reduce the volume 1 step (or
until the output is no longer distorted). Now, increase the
amplifier gain until the sound from the speakers becomes
distorted. Reduce the gain slightly so the sound
is
no
longer distorted to achieve the optimum gain setting.
B Power Indicator
Indication Color Status Solution
Blue Amplifier circuit is
normal
Amplifier circuit Turn off the
is abnormal. An power supply
electrical short has and eliminate the
occurred,
or
supply cause (replace
current is too high. the 15A if
15A fuse may be necessary). Then
blown. turn on the unit
None and verity that the
(LED is off) LED
has
turned
on. If it remains
off, turn off the
unit and consult
your dealer.
Power supply Use the correct
voltage is too high. power supply
voltage.
CONNECTION CHECKLIST (Fig. 5)
Please check your head unit for the conditions listed
below: (Fig.
4)
a.
The
head unit does not have a remote turn-on
or
power
antenna lead.
b.
The
head unit's power antenna lead is activated only when
the radio is on (turns off in the tape
or
CD Mode).
c.
The
head unit's power antenna lead is logic level output
(+)
5V,
negative trigger (grounding type),
or
cannot sustain
(+) 12V when connected to other equipment
in
addition to
the vehicle's power antenna. If any of the above conditions
exist, the remote turn-on lead of your PWE-SB must be
connected to a switched power source (ignition)
in
the
vehicle. Be sure to use a 3A fuse as close as possible
to this ignition tap. Using this connection method, the
PWE-SB will turn on and stay on as long as the ignition
switch
is
on.
C
SUB REM Bass Level Input
Connect the Remote Bass Level Knob (Included) to adjust
the output remotely. This is not to replace appropriate gain
level setting between the amplifier
and
the head unit.
D Power Mode Button
Depending on your source unit. Two options to turn on the
PWE-S8.
Option
1:
-REM (Button Out). Use this option when connecting the
Blue/White Wire (remote turn-on wire).
Option2:
-
SP
IN (Button In).
Use
this option when connecting the
speaker input leads.
Note:
For <Option 2> the "Speaker Level fnput System" setting,
connecting
the
Remote
Turn-On
Lead is not required.
How
ever.
the "SP fN"function may not work depending on the signal
source
co
nn
ected.
In
such
a
case,
co
nnect
the
Remote
Turn-On
Lead
to
an
incoming powersupply wire (accessory power)
in
the
ACCposition andpower mode set
to
REM (Button
fn)
.
E Remote Bass Level Knob
Allows the userto adjust the overall bass level of the
subwoofer.
Turning the remote bass level knob
towards(+)
increases
the overall subwoofer level, while turning the bass level
knob towards
(-)decreases
the overall subwoofer level.
(Note:
PWE-SB
can be used without connecting the
remote bass level knob. However, overall subwoofer level
cannot be adjusted from the listening position.)
If this is objectionable, a SPST (Single Pole, Single Throw)
switch, in addition to the
3A
fuse mentioned above, may be
installed in-line on the PWE-S8 turn-on lead. This switch will
then be used to turn on (and off) the PWE-S8. Therefore, the
switch should be mounted so that is accessible by the driver.
Make sure the switch is turned off when the vehicle is not
running. Otherwise, the subwoofer will remain on
and
drain the
battery.
(j)
Blue/White
~
PowerAntenna
Q)
Remote Turn-On Lead
@)
To
otherAlpine components' Remote Turn-On Leads
@
SPST Switch (optional)
@
Fuse (3A)
(J)
As close
as
possible to the vehicle's ignition tap
@
Ignition Source

TYPICAL
SYSTEM
CONNECTIONS/CONNEXIONS
TYPIQUES
DU
SYSTEMEICONEXIONES
TIPICAS
DEL
SISTEMA
[English]
F
Head Unit, etc (sold separately)
G RCA Extension Cable (sold separately)
H
From Head Unit Speaker Output
[Fran~ais]
F
Unite principale, etc. (vendu separement)
G Cable de rallonge RCA (vendu separement)
H
De Ia sortie haut-parleurde !'unite principale
[Espaiiol]
F Unidad principal, etc. (se vende por separado)
G Cable de extension RCA (se vende porseparado)
H
Desde Ia salida de Ia bocina de Ia unidad principal
" '
Note:
Power
Mod
e
button
must
be
set
to
REM
(Button
Out)
Remarque:
Le
bouton
Mo
de
d'a
/im
e
nt
at
io
n
doit
eire
r
eg
iea
REM
(bouton
de
so
rtie
)
Nota:
El
bot6n
de
modo
de
enc
endido
d
ebe
esta
ren
REM
(bot6n
fu
e
ra
)
'
/
RCA Input System/Systeme d'entree RCA/Sistema
de
entrada RCA
F Head Unit, etc (sold separately)
F
G RCA Extension Cable (sold separately)
D D =
(L) (
R)
/'~--
-.------------:--:--
--
----
----~
----
,"
..
. .
. .
. .
.
@
~®.:~~b.fi:lij!l
'
------.-
..!1
o.
--
-•~L•..:
' I "'"
@
0 L
J -
-
:::
,C:.%
-
.
'
.
'
.
'
.
'
.
'
.
'
r-------•
..................
i
I
BUTTON
OUT
I
:SOUTON
DE
SORT
IE:
L
..
~~.!~~I-~~!l!!.
....
J
- Fr
ont
Left Speaker(White(+
))
Ha
ut
-parteur avant gauche(Blanc(+))
AJtavoz delantero izquierdo (Blanco(+))
Fro
nt
LeftSpeaker (White/Black(-
))
Haut
-
par1
eur
a
vant
gauc
he
(Bla
nc/Nair(-})
AJta
voz delantem derecho (Blanco/Negro (-
))
Il
l!
!1111
I
I
4
Ground Lead (Black) =
8
NOT USED
NON
UTILISE-
NOSE
UTILIZA
Fro
nt
Right Speaker (Gray(+))
Ha
ut
-pruteur avant d
ro
it
(Gris
(+))
AJta
v
oz
de
lantero derecho(Gris
(+
))
F
il
de
mise
a
Ia t
erre
(
No
ir
)
Cond
uct
or de
pues
ta a
tierra
(
Negro
)
Front Right Speaker
(G
ray/Black(-))
Haut-
parl
eur
ava
nt
dro
it
(G
ri
s/Noir (-
))
Alta
voz
de
l
antero
i
zqu
i
erdo
(Gris/Negro
(-
))
-Remote T
um-Qn
Lead (Bi
ue!Nh
ite)
7
F
il
de
mi
se
en
marche
a
di
stance
(Bi
eu/B
i
anc
)
'---------------------
C~a
~b!
le~pa
~
rn
~
~~~~ido~rern
~
o~to~(~
~u
~~~
l~an
~co~
)
________
__)
Battery Lead
(Red)
F
il
de
Iabatterie (Rouge)
Co
ndu
ctor
de
!a
bateria
·
(Roto)
3".
6

Speaker Level lnput/Systeme d'entree de niveau
de
haut-parleur/Sistema de entrada a nivel de bocina
F
------------
,
'
1 •
Note:
Connect
to
each
speaker
1
Left
Speaker
1
lead
(splice)
without
breaking
the
1
Haut-parleu
r
de
gauche
connection
between
the
headunit
and
Boc
i
na
izquier
da
the
speaker.
1
Q
*
Remarque : Connectez chaque
jil
de haut-parleur sans briser
.+ll-
la
connexion entre l'unite
..
....
..
.
principale etle haut-parl
eur.
1
••••
·~;::
••
H
Right
Speaker
Haut-pa
rl
eur
de
droite
Bocina
derecha
Q
------------
, '
1 *
Note
:
Con
nec
t
to
each
s
peaker
1
1
lea
d
(splice)
without
breaking
the
1
connectio
n
between
the
headun
it
and
the
sp
eake
r.
···---0~d-
H •
-,
'
:~-.::
••
11'_.
)
I
*
Remarque : Connectez chaque
jil
de haut-parl
eu
r sans briser
Ia
connexion entre l'unite
principale et le haut-parleur.
*Nota: Conecte a cada conductor
de
la
bocina (empalme) sin
romper
la
conexion entre
la
unidadprincipaly
la
boci
na.
I·······..
__
...
(
.l
.~./
~-·····
;::::_:_.IJ"
l
I.
··········'
f-11-rr-
..,--
---..-,--tl--,-.,----,;,----,o;-------..
---,,.,;!:o!;{·•
••
~
1'_...
~······
0
L.....J
•••••••••
J
*Nota: Conecte a cada conductor
de
Ia
bocina (empalme) sin
romper
la
conexion entre
la
unidadprincipal
y
la
boc
in
a.
,_---------
__
,
/
Note:
'
I
Power
Mode
button
must
be
set
to
SPIN
(Button
In)
When
using
speaker
level
inputs,
LEFT
and
RIGHT
are
summed
to
a
MONO
signal
,
therefore
is
recommended
to
co
nn
ect
both
LEFT
and
RIGHT
input
s
ig
na
ls
for
proper
voltage
lev
el.
Remarque:
Le
bouton
Mode
d'alimenta
tio
n
doit
etre
regie
a
SPIN
(bouton
d
'e
ntn!e)
Lorsque
vous
utilise
z
les
e
ntrees
de
haut
-
parleur.
GAUCHE
et
DROIT£
sont
r
eg
roupes
pour
offrir
un
signal
MONO.
De
ce
fait,
il
est
recommande
de
connecte
r
les
signaux
d'entree
GAUCHE
et
DROIT
au
niveau
de
tension
appro
prie.
Nota:
'
El
bot6n
de
modo
deenc
end
ido
debe
estar
en
SP
EN
(boton
dentro)
Cuando
se
usan
las
entradas
a
nivel
de
bocina,
IZQUIERDA
y
DERECHA
se
agregan
a
una
senal
MONO,
por
lo
tanto
,
se
recomienda
c
onectar
am
bas
seiiales
de
entrada
IZQU!ERDA
y
DERECHA
para
el
nivel
correcto
de
vol
taj
e.
/
''
''
''
''
''
r....................
&
...................,
:
BUTTON
IN
I
:BOUTON
D'ENTREE
:
L~~~~-~~~~~--j
F
ro
nt
Left Speaker (White
(+))
Haut-parleuravant gauche (Bla
nc(+
))
Altavozdelantero izquierdo (Blanco (+
))
Front Len ::;peaker(Whiter.,la
ck
(-
))
Haut-parleur
avant
gauche {
Bianc
/
No
ir
(-))
Altavoz delantero derecho (Blanco/Negro(-))
Front Right Speaker (Gray (
+))
Haut-parleur avant
dro~
(Gris
(+
))
Altavoz delantero derec
ho
(Gris
(
+)
)
Front Rig
ht
Speaker (Gray/Bl
ack
(-))
Haut-parleur avant
dro~
(Gris!Noir
(-))
AHavoz
delantero izquierdo (Gris!Negro(-))
NOT
USEQ {
RemoteTum-On Lead (BiuetWhite)
NON
UTILISE
Fil
de
miseen marche
a
dis
tance (Bieu/Bianc)
NO
SE
UTILIZA
Cable para encendido remoto (Azul/Blanco)
Battery Lead(Red)
Fil
de
Ia batterie (Rouge)
_ Conductor
de
Ia bateria (Rojo)
'3'"'
6
Ill!I
IIII
4
I I
8
Ground Lead (Black)
~
Fil
de
mi
se
A!a
terre
(No
i
r)
Conductor
de
puesta
a
tierra
(Negro)
,
____________ ,

PWE-58
8 .. COMPACT POWERED SUBWOOFER
CAISSON
DE GRAVES ALIMENTE DE 8 PO

WE 58
8" COMPACT POW
CAISSON
DE GRAV~~ED SUBWOOFER
ALIMENTE
DE 8 PO
e IO Innovation
Driving Mobile M d.

PWE-58
8 .. COMPACT POWERED SUBWOOFER
CAISSON DE GRAVES ALIMENTE DE 8 PO
4 58043 544950

IMPORTANT NOTICE!
PLEASE READ FIRST BEFORE INSTALLING SPEAKERS
Congratulations on your purchase of high quality speakers from
Alpine. Your listening satisfaction is important to us.
In
order to
maximize and maintain peak speaker performance the following
guidelines are being provided. Please read this notice carefully
before operating the speakers.
1.
Do
not
over-drive the amplifier. Over-driving the
amplifier
will
result in
distortion
or
clipping
and can damage any speaker.
2.
Make sure gain
controls
are properly set. (Follow
instructions
in
amplifier
owner's manual.)
3.
Make sure that the speaker is properly rated
for
the
amplifier.
4.
Make sure that volume, bass, treble, equalization
or
crossover
settings
do
not
cause the
amplifier
to
over-drive.
Failure to follow these guidelines may result
in
burned ordamaged
speaker voice coils which will void your warranty.
If further assistance is necessary, please contact your Alpine
authorized dealer.
68-00493Z64-A (Y)

Thank you for choosing Alpine for your car audio equipment needs. Our goal is to
produce the best audio/video/navigation products in the world and hope your
expectations are met.
Please take a moment to protect your purchase by registering your product now at
the following address:www.alpine-usa.com/registration.
You will be informed of
product and software updates (if applicable), special promotions, and news about
Alpine.
Also, by registering your product, you can enter for a chance to win prizes!
We look forward to continue serving you
in the future.
Sincerely,
The Alpine Team
French
Nous vous remercions d'avoir porte votre choix sur un
equipement audio automobile Alpine. Notre principal
objectif est de fabriquer les meilleurs produits audio,
video et de navigation au monde afin de repondre aux
exigences de nos clients.
Veuillez prendre quelques instants pour securiser
votre achat
en enregistrant votre produit al'adresse
suivante:www.alpine-usa.com/registration. Vous
serez informe(e) des nouveaux produits, mises a
jour
logicielles (le cas echeant), promotions speciales et
informations concernant Alpine.
Lors de !'enregistrement de votre produit, vous
pouvez vous inscrire et obtenir une chance de gagner
des
prix!
Nous esperons que nos produits vous donneront
entiere satisfaction.
Cordialement,
L.:equipe Alpine
Spanish
Agradecemos que haya elegido a Alpine como su
proveedor de equipo de audio para su vehfculo.
Nuestro objetivo
es fabricar los mejores productos de
audio, video y navegaci6n del mundo y esperamos
poder cumplir con sus expectativas.
Para proteger su compra le pedimos que se tome
unos mementos para registrar su producto en Ia
siguiente direcci6n:www.alpine-usa.com/registration
Recibira informacion sobre novedades del producto,
actualizaciones
de software (si su producto lo
requiere), promociones especiales y noticias sobre
Alpine.
Ademas, si registra su producto, tendra
Ia posibilidad
de entrar a un sorteo para ganar diversos premios.
Esperamos poder tener
Ia oportunidad de seguir
ofreciendole otros productos en el futuro.
Atentamente,
El equipo
de Alpine

G~~NTIE LIMITEE .
_Fideles a· leurengagementde n~fout'Jli.rque ~prc;BjuitS CHfQljalite, ALPINE ELECTRONIQUE DE L' AMERIQUE, INC. et
ALPINE ELECTRONlQUE DU CANAf)A; ·,IN9· (»'lpkl~) sontheurevses de vous offrir cette garantie. Nous vous suggerons de
le lire attentivtment eten entier. Si'~QtAS·t~,\feZI~moiridrequesti()O, veuillez contacter l'un de nos concessionnaires ou appeler
directementAlpine aux
nuhl(ir<)$)1f$tia~~SSQ1.1t·
• PRODUITS COWERTS PAR. LA~~~
Cette garantie couvre les produits audio de voitu~. ~ties
accessoires connexes ("le produit"). Elle ne cowre tes
produits que dans le pays ou ils ont ete achetes.
• DUR~E DE LA GARANnE
Cette garantie est en vigueur pendant un an a pa;rtir qe ta
datedu premier achat du client.
• PERSONNES PRO~GEES PAR LA GARANTIE
Seull'acheteur original du produit, s'il resisde aux
Etats:-Unis, a Porto Rico ou au Canada,· peut se prevaloir
de Ia garantie.
e CE QUI EST COUVERT
Cette garantie couvre tous les defauts de materiaux et de
fabrication (pieces et
main d'oeuvre) du prbduit
e CE QUI N'EST PAS COUVERT
Cette garantie ne couvre pas ce qui suit:
(j) Les dommages survenus durant le transport des
produits
renvoyes aAlpine pour ~tre repares (les
reclamations doivent Atre adressees au transporteur);
(2) Les degats provoques par un accident ou une mauvaise
utUisation, ycompris des bobines acoustiques griHees
suite aune surexcitation des enceintes (augmentation
du
niveau de l'amplificateurjusqu'a atteindre un effet de
distorsion ou d'ecr6tage), une defail1ance mecanique
des enceintes(perforations, ctechirures ou fentes),
panneaux
LCD fissures ou endommages,
disques durs endommages
ou ayant subi une chute.
® Tout degAt provoque par negligence, usage inapproprie,
mauvaise utilisation
ou par le non-respect des
instructions indiquees dans le manuel de l'utitisateur.
® Les dommages dus a Ia force majeure, notamment aux
tremblements
de terre, au feu, aux inondations, aux
tempites
ou aux autres catactysmes naturels;
Les frais ou les depenses relatifs a l'entevement ou aIa
reinstallation du produit;
® Les services rendus par une personne, physique ou
morale non autorisee;
® Les produits dont le. numero de serie aete efface,
modifie
ou retire;
('[) Les produits qui ont eta adaptes ou modifies sans le
consentement d'Alpine;
@ Les produits qui ne sont pas distribues .par .Alpine aux
Etats-Unis, a Porto
Rico 'ou au Canada;
@ Les produits qui n'ont pas ete achetes par l'entremise
d'un concessionnaire Alpine autorise;
• COMMENT SE PREvALOIR DE LA GARANTIE
<D II vous taut remettre le produit neoessitant des
reparations a
un centre de service autorise Alpine .ou a
Alpine marne et en assumerles frats de transport. Alpine
a le choix entre reparer le produit ou le remplacer par
un
produit neuf ou revise, le tout sans frais pour vous. Si
les reparations· sont couvertes '
P,Sr Ia garantie et si le produit a ete envoye a un centre
de service Alpine
ou aAlpine, le paiement des frais de
ree;cpedi~ion du produit inco!"be Alpine.
(2) · Vous. devez donner une description detaillee des
problemas qui sont a l'origine de votre demande de
repar~tion.
® Vous devezjoindre Ia preuve de votre achat du produit.
® Vous devez emballer soigneusement le produitpour
eviter tout dommage durant
son transport. Pour eviter Ia
perte de I' envoi, il estconseitle de choisir un transporteur
qui propose
un service de suiVi des envois.
e LIMITATION DES GARANnES TACITES
LA DUREE DE·TOUTES LES GARANTIES TACITES, Y
COMPRIS
LA GARANTIE D'ADAPTATION At:UTILISATION
ET
LA GARANTIE DE QUALITE LOYALE ET MARCHANDE,
-
EST LIMITEE ACELLE DE LA GARANTIE EXPRESSE
DETERMINEE CI-DESSUS. PERSONNE N'EST AUTORISE
A ENGAGER AUTREMENT LA RESPONSABILITE
D'ALPINE
EN VERTU DE LA VENTE D'UN PRODUIT.
e EXCLUSIONS DE LA GARANTIE
ALPINE STIPULE EXPRESSEMENT QU'ELLE N'EST PAS
RESPONSABLE DES DOMMAGES-INTERETS ET
DOMMAGES INDIRECTS PROVOQUES PAR LE
PRODUIT. LES DOMMAGES-INTERETS SONT LES FRAIS
DE TRANSPORT DU PRODUIT VERS UN CENTRE DE
SI;RVICE ALPINE, LA PEATE DE TEMPS DE
t:ACHETEUR ORIGINAL, LA PEATE D'UTILISATION DU
PRODUIT, LES BILLETS D'AUTOBUS, LA LOCATION DE
VOITURES ET TOUSLES AUTRES FRAIS LIES A LA
GARDE DU PRODUIT.
LES DOMMAGES INDIRECTS SONT LES FRAIS DE
REPARATION OU DE REMPLACEMENT D'AUTRES
BIENS ENDOMMAGES SUITE AU MAUVAIS
FONCTIONNEMENT DU PRODUIT.
LES RECOURS PREVUS PAR LES PRESENTES
EXCLUENT
ET REMPLACENT TOUTE AUTRE FORME
DE RECOURS.
eLIEN ENTRE LA GARANTIE ET LA LOI
La garantie vous donAe des droits specifiques, mais vous
pouvezaussi jouir d'autres droits, qui varient d'un etat ou
d'une province a I' autre. En outre, certains etats et certaines
provinces interdisent de limiter
Ia duree des garanties
tacites ou d'excture les dommages accessoires
ou indirects.
Dansce
cas, les limites et les exclusions de Ia garantie
peuvent
ne pas s'apptiquer a vous.
• CLAUSE APPUCABLE AU CANADA SEULEMENT
Pour que Ia garantie soit valable, il faut qu'un centre
d'installation autorise ait installe
le systeme audio pour
I'autodans votre vehicule et qu'U ait ensulte appose son
cachet sur Ia garantie.
•• NUMEROS D•APPEL DU SERVICE A LA CUENTELE
Si vous avez besoin de nos services, veuillez appeler Alpine
aux numeros ci-dessous pour le centre
de service autorise
Alpine
te plus proche.
AUDIO DE VOITURE
NAVIGATION
1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1..fl88.628.4357)
Ou visitez notre site Web al'adresse http://www.alpine-usa.com
ALPINE ELECTRONIQUE DE L:AMERIQUE, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ~LECTRONIQUE DU CANADA, INC., n7 Supertest Road, Toronto, Ontario M3J 2M9, Canada
N'envoyez
aucun produit aces adresses.
Appelez notre numero gratuit ou visitez notre site
Web si vous recherchez un ·centre de service.

-
,..
-~
;r:,
.
.
~
·
--;.-_·-
..
...
-
,.
1
~;a;:~~~-~;~=~~=~::~=~!~r:-·r~jarfl
.·
dedieatedto
·
qyal~
;
cr•ft~-
···
·
.
·
·
···
;
you
flaY@
any
questl~.
'
l?~
•..
•
::::
-
_-;-
..
.- '·1:·
,;:_··
· ·
:~
ev,ltfQJJ
~:
c~ftEI.l:
..
.·
·.·
'.
.~·.·.'
..
.
:.
·
>>.
~~
:i·>>:\')
·
.:
t/·.;
Thisw~rran~y
:
onty
·
coverstlleotfgfnar
·
~~
:·
()f
·
·~
·
produd,
\I'JhO
-
tnust
.
reside
.
1ft
the
·
united
s•~·
~
~~t.t6
Ateo-
.
or
Canada.
•WHAl:IS
COVERED:
.
This
Warranty
cowrs
defects
m
·.
matertals
·or
workmanship
(parts
·and labor)
in
the
prod~t.
•WHAT
aS
NOT
COVERED:
This
Warranty
dOes
not
cover
the
fOllOWing:
Q)
Damage
·
occurring·
during
·
shipment·
of
fhe·
productto
Alpine for-repair (claims mustbe presented to the ·
carrier).
(%)
Damage caused
by
accident
or
abuse,
including burned
voice
coils
caused
by
over-driving thespeaker(amplifier
level
is
turned
up and driven into.
distortion·
or clipping).
Speaker mechanical failure (e.g. punctures, tears or
rips). Cracked ordamaged
LCD
panels. Dropped or
damaged hard drives.
@ Damage caused
by
negligence, misuse, improper
operation orfailure to follow instructions contained
in
the Owner's
manual..
.@ Damage caused
by
act of
God,
including without
limitation, earthquake, fire,
flood,
storms or other acts of
nature.
Any cost orexpense related to the removal or rein-
stallation of the product.
~
Service performed
by
an unauthorized person, com·
pany or association.
@
Any
product
Which
has the serial number defaced,
altered or
removed.
(j) Any product which has been adjusted, altered or
modified without Alpine's consent.
<8)
Any product not distributed
by
Alpine within·the.\Jnited
States, Puerto Rico or Canada. ·
®
Any
product not purchased from
an
Authorized Alpine
·
Dealer.
e HOWTO OBTAIN WARRANTY SERVICE:
<D
You
are responsible for delivery of the product to
an
Authorized Alpine
Service
Center or Alpine for repair
and for payment of any initial shipping charges. Alpine
will, at its option, repair or replace the product with a
new
or reconditioned product without charge. Ifthe
repairs are covered
by
the
warranty,
and if the product
was
shipped to
an
Authorized Alpine Service Center or
Alpine, Alpine will
pay
the return shipping charges.
<2)
You
should provide a detailed description of the
problem(s) for which service
is
required.
··
;··
®
v~
~~t
;.
$upp1~
:
pR)OtO,~y()Or
:
PU,re,•se
·
ot
tt1$~f6d~
f
··
®.
y~
·
must
·
~~ge
.....
::
pnxiuotsequr~ly
.
l()av~
·"
d~
..
;:
···
·
dUrillg
;
~~~To
_
~n
.
t
:
l9s(~ges
it
iS
:'·.·~
'.•:
·.,
..
:·
.·..·:.··
~~e~
:
tq
.
Wl,$
:
·
~
oarrifJr
lhafprovides·a.
t~inQ
i·
·
sel'¥ice~
·
•HCw
····.
we
..
w...rt
·
·.a~o
··
wARRANraes:
·
..
..
.
..
.
·.·
.
..
···
..
·•.
•
..
.•.·.•.
.•.
...••..
.
·•.·
•:::
.••
:.··.
'
..
'
ANY
~M~LIEQWA~~~S
.
I~l..UI)fNG
F~TNESS
FGR
'.
'.
~se
·
AND
'
MeRCHANTASILJTV
..
AAE
LIMITED IN .
.
DUf:tATtON
-
'f()
'
TJ-tE
·.PERiOD
····
oFTt-fi
·EXPRESS
..··
..
·
.•.
WARRAtfty.
·
sET
·
FORTH
~
AB()VEANDNOPERSONIS
•·
AUfHOAtZEP
tO
ASSUME
FoR
·
A~PtNE
ANY
OTHER
~tABILtTV
IN
.
CONNECT10N
WtTH
THE.
SALE
OF
THE
PAQQ\Jet~
.
•
•HOW
We
PCLUDE
'CERTAIN DAMAGES:
:ALPINE
EXPRESSLY
DISCLAIMS LIABILITY
FOR
INCIDENTAL
AND
CONSEQUENTIAL
DAMAGES
CAUSED
BY
THE
PRODUCT.
THE
TERM
"INCIDENTAL
DAMAGES"
REF=ERS
TO
EXPENSES OF TRANSPORTING THE
PRODUCT
TO
THE
ALPINE SERVICE CENTER,
LOSS
OF
THE ORIGINAL PURCHASER'STIME,
LOSS
OF
THE
USE
OFTHE
PRODUCT,
BUS
FARES,
CAR
RENTALS
OR
OTHERS COSTS
RELATING
TO
THE
CARE
AND
CUSTODY
OF THE
PRODUCT.
THE
TERM
"CONSEQUEN-
TIAL
DAMAGES"
REFERS
TO
THE COST
OF
REPAIRING
OR
REPLACING
OTHER
PROPERTY
WHICH
IS
DAMAGED
WHEN
THIS
PRODUCT
DOES NOT
WORK
PROPERLY.
THE REMEDIES
PROVIDED
UNDER THIS
WARRANTY
ARE
EXCLUSIVE
AND
IN
LIEU
OF
ALL
OTHERS.
eHOW
STATE/PROVINCIAL
LAW
RELATES TO
THE WARRANTY:
This Warranty gives
you
specific legal rights, and
you
may
also
have
other rights which vary
from
state to state and
province to province.
In
addition, some states/provinces do
not allow limitations
on
how
long
an
implied warranty lasts,
and some do not allow the exclusion or limitation of
incidental or consequential damages. Accordingly, limitations
as to these matters contained herein
may
not apply to
you.
eiN
CANADA ONLY:
This Warranty
is
not valid unless your Alpine car audio
product
h~s·
been installed
in
·your vehicle by
an
Authorized
InstallatiOn
·
Center,
.and this.warranty stamped upon
installation
by
the installation center.
e HOWTO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
CAR AUDIO
NAVIGATION
1-&GO-ALPINE-1
(1-800·257-4631)
1-888-NAV-HELP (1-888-628-4357)
Or visit our website
at;
http://www.alpine-usa.com
ALPI~E
ELECTRONICS
OF
AMERICA, INC., 19145 Gramercy
Place,
Torrance,
California 90501,
U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest
Road,
Toronto,
Ontario
M3J
2M9,
Canada
Do
not
send
products to these addresses.
Call the toll free telephone number orvisit the website to .locate a service center.