ALS PINLED PINR User manual

PINLED
Version: 2017-10-17 EN
LED wall and ceiling-mounted luminaire
INTENDED USAGE
This product will only serve the purpose of illumination.
The light is only suitable for use indoors.
SCOPE OF DELIVERY
1 x LED luminaire
2x mounting disc
1 x set of instructions for assembly, operation and safety
SAFETY INFORMATION
• The light is only suitable for use in interiors, in dry,
enclosed rooms.
• The light is not suitable for attaching on uneven
surface.The light may otherwise fall.This can result
in product damage and / or injuries.
• Don’t install under power.
• Follow the instruction manual for installation.
• Installation only by qualied and authorised
persons.
• Do not use the product when it has been damaged
(defective covers) or there are operational faults
such as ickering, smoking, steaming, crackling
noises or the smell of smoke.
• A damaged or defective product must be changed
or repaired by the manufacturer, a service person
or a comparable qualied person.
• Installation only under observance of the valid
guidelines specic to application and country
among others VDE 0.100.
• Never open one of the electrical operating agents
or plug any objects into them. Such procedures
signify a danger to life through electrical shock.
• Absolutely avoid contact between the product
and water or other liquids. For reasons of electrical
safety, the light may not be placed in contact with
water or other liquids or submerged in water.
• The product may not be changed or modied.
DESCRIPTION OF PARTS
LED luminaire
TECHNICAL DATA
LED luminaire + LED driver
PINR-600SWNWDD L=600 mm
PINR-900SWDD L=900 mm
PINR-1200SWDD L=1200 mm
PINR-1500SWDD L=1500 mm
PINE-600SWNWDD L=600 mm
PINE-900SWNWDD L=900 mm
PINE-1200SWNWWWDD L=1200 mm
PINE-1500SWNWDD L=1500 mm
LAMP
PINR-600SWNWDD 18,5W
PINR-900SWDD 26W
PINR-1200SWDD 35W
PINR-1500SWDD 45W
PINE-600SWNW 18,5W
PINE-900SWNW 26W
PINE-1200SWNWWW 35W
PINE-1500SWNW 45W
Protection class: I
The LED light agent cannot be replaced.
LED driver
Nominal voltage,
primary: 220-240V~ ( 50/60 Hz )
DISPOSAL
The packaging consists of environmentally friendly materials.
Dispose of them in the local recycling containers.
Do not dispose of this product in the household gar-
bage when it has reached the end of its lifecycle, but
rather take it to a disposal center.Your local ofcials
will provide you with information about collection
ofces and their business hours.
MAINTENANCE AND CLEANING
• The LED light agent cannot be replaced.
• Do not use solvents, such as benzene and similar
agents.The light would be damaged thereby.
• Only use a dry, lint-free cloth for cleaning the
product.
Protection class I Notication of Risks
CE label Safety Instructions
The product is only
for use in interiors.
Cleaning Instructions
The product may not
be disposed of in the
household garbage.
RoHS
SAFETY
READ THE INSTRUCTIONS BEFORE USING THIS PRODUCT.
KEEP THE SAFETY AND OPERATING INSTRUCTIONS FOR
FUTURE USE.
address | contact
A.L.S. GmbH & Co. KG
Mastorter Str. 29 | 88069 Tettnang (Germany)
Tel.: [phone] | Fax.: [phone]
E-Mail: [email protected] | Web: www.als.de
anodized
aluminium
PINR
PINE

Please remove back plate carefully. Don‘t remove end caps.
Please x cable as required.
Make sure each wire is xed securely.
For mounting please remove black and red wire.To remove it please press on
top of cable gland of each wire and pull on each carefully.
Please x red wire on +and black wire on - with LED driver. Push cable gland
top (red and black) with small screw driver and x cables accordingly.
Pull on each cable to make sure those are xed securely.
Please place mounting plate on right position, mark xing holes.
Use spacer washer between wall and mounting plate and screw
xing plate to wall.ATTENTION! Fitting cannot be xed to uneven
surface. Please make sure that plate is xed securely to wall. Clip
in front part of tting. Front part has to be secured with safty wire.
Safty wire cannot be removed and has to be xed all time.
(07) Front part has to be ush mounted. Push it hard to mounting plate till
you can hear the „Click“. Please check that front part is xed securely.
(08) Terminal with DALI and mains connection
Power supply: L= 1+N 230V AC
DALI: DA/L=2 / DA/N=3
spacer -
mounting example
02 03
04 05
01
07
08
Protective ground wire