ALTER EGO Retro 100 Base User manual

Manual
Please read this manual carefully before using it in order to become thoroughly familiar with the correct
operation of your bike’s controls, its features, capabilities and limitations. This manual includes safe riding
tips, but does not contain all the techniques and skills necessary to ride an electric bicycle safely.
Please make sure you are familiar with the legal rules for electric bikes in your country and state before
the first use.

Exploded View

Paremeter
Model name: Retro100 Base | Premium Motor: Brushless geared DC motor Bafang Throttle:Thumb
Frame/Fork/Handlebar: Designed by Marioebike Rated output power: 500W-Base | 750W-Premium Rim: 20*4.0 inch Al-alloy
Display: APT-800S Top speed: 25-45KM/H PAS: 12 magnet integrated speed
Tire: Kenda/Innova 20*4.0/4.25
Brake system: Tektro 180mm mechanical disc brake Seat: Marioebike customized comfortable seat
Rated voltage: 48V Net weight: 32kg Max load: 125KG
Controller: TongSheng/LiShui Charger: 48V 2A / 3A Optional Package Size: 1470*340*890mm

Display
Ⅰ Press Power button for 1 second can turn on/off the display.The display automatically shut down when there is no operate & ride for N minutes.
Ⅱ Short Press UP/DOWN button can change the assist level.Top assist is 5,0 for neutral.
Ⅲ For detailed instructions,please contact us freely.

Controller System

Display Options
APT-850C

Accessories Options

Attention
Battery & Charge
1．Red indicator on the charger means charging, when it turns green , please stop charging your battery;
2．Do not expose to temperature ＜-20°C or ＞35°C, fully charge the battery and store separately if not use for over 30 days;
3．Fully charge it every 90days,or the battery self-discharge and be damaged. This damage is not covered by the Limited Warranty;
4．Never expose your battery to damp environment or soak into water, never short circuit the battery terminals, this damage is not
covered by the Limited Warranty;
5．Charge with the original charger only;
6．Do not disassemble/punch battery pack. Do not place it in fire or drop from high , avoid contacting with contacts;
7．Turn off the bike before charge it. Plug the charge port first then the AC plug;
8．Do not cover any items on the charger during charging;
9．Pull out charge port before the AC plug;
10．Please keep battery out of reach from children;
11．The capacity of Li-battery will decrease when <-10°C;
12．Recycle or dispose of in accordance with local regulations.

Attention
Ride & Maintenance
1．Must with your helmet on and follow the local laws and regulations;
2．Read this instruction carefully before riding Ebike;
3．Start your ride with the 3rd PAS level;
4．Keep the headlight on at night, if your bike is equipped;
5．Fully check brake system, tire pressure , and battery level before riding;
6．Do not ride in extreme weather conditions;
7．Do not ride into water over 10cm;
8．Replace the quick-wear parts (lie: break pad) in time;
9．Keep your Ebike away from damp, high temperature, or corrosive environment;
10．Keep your Ebike away from being sun-scorched and rain-drenched;
11．Check screws, chain and other parts regularly and adjust accordingly.

In The Packaging
In the packaging, you will find the following tools & hardware:
1 x whole bike
1 x lithium-ion battery
2 x keys for the battery
1 x battery charger
1 x two-sided open end wrench with a 15mm end and a 13mm end
1 x two-sided open end wrench with a 8mm end and a 10mm end
1 x set of Allen key
1 x set of pedals

Warranty
Each new Mario Ebike comes with a manufacture’s warranty for the original retail purchaser. Please visit
www.alteregobikes.com/warranty for complete warranty terms.
This warranty is only valid for the first buyer!
Mario Ebike is intended for use on paved road only!
Any modifcations to the Mario Ebike will not covered by this warranty!
Damage caused by stunt riding, or other abusive treatment is not covered by this warranty!
WASHING AND CARING FOR YOUR BIKE
Sweat, dirt and salt from winter road maintenance or sea air can damage your bike, you should therefore regularly clean your
bike and protect it against corrosion. Use clear water for cleaning and alittle bit of soap if necessary to dissolve grease residues.
Do not spray water directly onto your bike. Instead, use alightly damp cloth to wipe down any dirt or debris. After drying your
bike, treat surfaces with acare product. Finally, wipe all parts with aclean, soft cloth.

HAPPY RIDING !

Mario Ebike Co., Ltd.
Add.: No.1-6 Xiyuan Road, Hutang Town, Wujin District,
Changzhou City, Jiangsu, China.
Tel./Fax:[phone]
Web: www.marioebike.com
B2B: marioebike.en.alibaba.com