Altimium EXT.HDMI70IRSET User manual

EXT.HDMI70IRSE
HDMI/IR/RS232 Twisted Pair Extender
All Rights Reserved
Version: EXT.HDMI70IRSE_2016V1.1
User Manual

HDMI/IR/RS232 Twisted Pair Extender
Altimium www.altimium.com
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Do not put any heavy items on the extension cable in case of extrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period of time.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

HDMI/IR/RS232 Twisted Pair Extender
Altimium www.altimium.com
NOTICE: Please read this user manual carefully before using this product.
Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
This manual is for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till December 2016. Any changes of
functions and parameters since then will be informed separately. Please refer to the
dealers for the latest details.
All rights reserved. No part of this publication may be copied or reproduced without
permission.
All product function is valid till 2016-12-5.

HDMI/IR/RS232 Twisted Pair Extender
Altimium www.altimium.com
Contents
1. Introduction................................................................................................................1
1.1. Introduction to the EXT.HDMI70IRSE...............................................................1
1.2. Features ...........................................................................................................1
1.3. Package Contents ............................................................................................1
2. Product Appearance..................................................................................................2
2.1. Appearance of EXT.HDMI70IRSET..................................................................2
2.2. Appearance of EXT.HDMI70IRSER..................................................................3
3. System Connection...................................................................................................4
3.1. System Diagram...............................................................................................4
3.2. Usage Precautions ...........................................................................................4
3.3. Connection Procedures....................................................................................4
3.4. Twisted Pair and RS232 Cable Connection......................................................5
3.5. Application........................................................................................................6
4. Application Solution...................................................................................................6
4.1. System Diagram...............................................................................................6
4.2. Product Assortment Description .......................................................................7
5. Specification..............................................................................................................8
6. Panel Drawing...........................................................................................................9
7. Troubleshooting & Maintenance..............................................................................10
8. After-sales Service..................................................................................................11

HDMI/IR/RS232 Twisted Pair Extender
Altimium 1 www.altimium.com
1. Introduction
1.1. Introduction to the EXT.HDMI70IRSE
The EXT.HDMI70IRSE is an HDMI/IR/RS232 twisted pair including a transmitter and a
receiver. The extender uses HDBaseT technology to deliver HDMI signal and control
signal (IR & RS232), and supports max transmission distance up to 60 meters with
CAT5e/CAT6 cable.
1.2. Features
Support Full HD: Delivers high resolution image (1080p@60Hz@48
b/pixels/3D/4Kx2K).
Max transmission distance is up to 60 meters over single CAT5e/CAT6 cable.
High Bandwidth: 10.2Gps.
HDTV Compatible, HDMI 1.4 and HDCP compliant.
Connect with a displayer to transmit EDID and HPD signals constantly by using a
CAT5e twist pair.
Bi-directional RS232 control.
Bi-directional IR control.
Use HDBaseT technology.
LED indicators show work status.
Wall/table-mountable aluminium enclosure, PT case design.
1.3. Package Contents
1 x EXT.HDMI70IRSET
1 x EXT.HDMI70IRSER (Packed separately from EXT.HDMI70IRSET)
8 x Plastic cushions
4 x Mounting ears (Separated from the EXT.HDMI70IRSET and
EXT.HDMI70IRSER)
2 x RS232 cables
8 x Screws
2 x Power adapters (DC 5V)
1 x User manual
Note: Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.

HDMI/IR/RS232 Twisted Pair Extender
Altimium 2 www.altimium.com
2. Product Appearance
2.1. Appearance of EXT.HDMI70IRSET
ON LINK IN
5V
Tx Rx
HDMI INHDBT OUT RS232IR IN IR OUT
1) ON/LINK/IN LED Indicators: All are green LED.
ON: Working status indicator of this device. When the device works fine, the LED
will keep blinking. And it will turn off when the device stops working.
LINK: Twisted Pair Link status indicator, green LED. It will keep on when
connection is successful.
IN: When connected with devices support HDCP and work normally this green
LED will keep on. If devices not support HDCP, the LED will blink.
2) POWER LED: Red LED indicator of power. It will keep on when power on.
3) HDBT OUT: Connects to HDBT IN port in the EXT.HDMI70IRSER via single
CAT5e/CAT6 cable.
4) HDMI IN: Connect to HDMI source device.
5) IR IN: Connect with IR receiver, receive IR signals sent from the
EXT.HDMI70IRSER only.
6) IR OUT: Connect with IR emitter, the sending IR signal are received by the
EXT.HDMI70IRSER.
7) RS232: Serial port, 3-pin captive screw connector, connects with the control
terminal to control the controlled terminal, supports bi-directional RS232 control
between the EXT.HDMI70IRSET and the EXT.HDMI70IRSER.
8) 5V DC: Connect with DC 5V power adapter.
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.

HDMI/IR/RS232 Twisted Pair Extender
Altimium 3 www.altimium.com
2.2. Appearance of EXT.HDMI70IRSER
Tx Rx 5V
HDMI OUTHDBT IN RS232IR IN IR OUT
ON LINK OUT
1) ON/LINK/OUT LED Indicators:All are green LED.
ON: Working status indicator of this device. When the device works fine, the LED
will keep blinking. And it will turn off when the device stops working.
LINK: Twisted Pair Link status indicator. It will keep on when connection is
successful.
OUT: When connected with devices which support HDCP and work normally, it will
keep on. If the connected devices don’t support HDCP, the LED will blink.
2) POWER LED: Red LED indicator of power. It will keep on when power on.
3) HDBT IN: Connects to HDBT OUT port in EXT.HDMI70IRSET via single
CAT5e/CAT6 cable.
4) HDMI OUT: Connect to HDMI display, HDMI signal output.
5) IR IN: Connect with IR receiver, receive IR signals sent from EXT.HDMI70IRSET
only.
6) IR OUT: Connect with IR emitter, the sending IR signal are received by
EXT.HDMI70IRSET.
7) RS232: Serial port, 3-pin captive screw connector, connects with the control
terminal to control the controlled terminal, supports bi-directional RS232 control
between the EXT.HDMI70IRSET and the EXT.HDMI70IRSER.
8) 5V DC: Connect with DC 5V power adapter.
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.

HDMI/IR/RS232 Twisted Pair Extender
Altimium 4 www.altimium.com
3. System Connection
3.1. Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and
safe.
3) All devices should be connected before power on.
3.2. System Diagram
DVD
EXT.HDMI70IRSET
EXT.HDMI70IRSER
Receiver
HDMI HDMI
CAT5e
INPUT
IR Remote
Rs232
PTN control panel
Projector
Whiteboard
3.3. Connection Procedures
Step1.Connect HDMI source (such as Blue-ray DVD) to HDMI IN port of the
EXT.HDMI70IRSET with HDMI cable.
Step2.Connect HDBT OUT port of the EXT.HDMI70IRSET to HDBT IN port of the
EXT.HDMI70IRSER, with single CAT5e/CAT6 cable.
Step3.Connect HDMI display (such as a HDTV) to HDMI OUT port of the
EXT.HDMI70IRSER with HDMI cable.
Step4.Both the EXT.HDMI70IRSET and the EXT.HDMI70IRSER have IR IN and OUT.
When one model is used as IR signal receiver, the IR signal must be sent out by
the other model.
For example: When IR IN port of the EXT.HDMI70IRSET connects with an IR

HDMI/IR/RS232 Twisted Pair Extender
Altimium 5 www.altimium.com
receiver, the IR emitter must be connected to IR OUT port of
EXT.HDMI70IRSER.
Step5.Both the EXT.HDMI70IRSET and EXT.HDMI70IRSETR have an RS232 port.
Connect the RS232 port of one device to a computer, and connect the RS232
port of the other one to the device to be controlled.
Note: RS232 signal can be transmitted bi-directionally between the
EXT.HDMI70IRSET and the EXT.HDMI70IRSER.
Step6.Connect DC 5V power adaptors to both the EXT.HDMI70IRSET and the
EXT.HDMI70IRSER.
3.4. Twisted Pair and RS232 Cable Connection
Twisted Pair
The twisted pair used in the EXT.HDMI70IRSE MUST be a straight-through cable. The
connectors can be T568A or T568B, but both sides must be the same.
Note: Please use a CAT5e cable with low impedance (Shielded twisted pair will be
better and should be well grounded)for good transmission effect.
RS232
With the RS232 port, the HDMItwisted pair extender can be control by several kinds of
control systems. The RS232 cable is a female 9-pin D to 3p captive screw connector.
The definition of its pins is listed in the table below.
TIA/EIA T568A
TIA/EIA T568B
Pin
Cable color
Pin
Cable color
1
green white
1
orange white
2
green
2
orange
3
orange white
3
green white
4
blue
4
blue
5
blue white
5
blue white
6
orange
6
green
7
brown white
7
brown white
8
brown
8
brown
1st
Ground
4--5
1st
Ground
4--5
2nd
Ground
3--6
2nd
Ground
1--2
3rd
Group
1--2
3rd
Group
3--6
4th
Group
7--8
4th
Group
7--8

HDMI/IR/RS232 Twisted Pair Extender
Altimium 6 www.altimium.com
No. Pin Function
1N/u Unused
2Tx Transmit
3Rx Receive
4N/u Unused
5Gnd Ground
6N/u Unused
7N/u Unused
8N/u Unused
9N/u Unused
3.5. Application
The EXT.HDMI70IRSE has a good application in computer realm, monitoring,
big-screen displaying, meeting room, education and bank & security institution etc.
4. Application Solution
4.1. System Diagram
RS232
PTN control panel
Projector
RS232 Control Signal
Audio/Video Signal
Video Signal
Audio Signal
DVD
EXT.HDMI70IRSET
EXT.HDMI70IRSER
Receiver
CAT5e
Laptop
Speaker
Speaker3
MIC VCR
Camera DVD
WP8
①
②
IR Remote

HDMI/IR/RS232 Twisted Pair Extender
Altimium 7 www.altimium.com
4.2. Product Assortment Description
1) Mini scaler switcher
6 video Inputs: 2 x HDMI, 1 x VGA, 1 x YPbPr, 1 x C-video & 1 x S-video, and
upscale to HDMI output at 1080P.
Support VGA resolutions: 640x480, 800x600, 1024x768, 1280x1024, 1280x768,
1360x768@60Hz, 1920x1080.
Built-in PAL/NTSC and audio format automatic identification technologies, with good
video and audio processing technology for high performance.
3 audio outputs: HDMI embedded audio, 3.5mm stereo audio and Coaxial (SPDIF).
Output display H/V size, position, image color adjustable and output image
freezable.
Built-in breakpoint memory and power-off protection function.
2) Mini digital amplifier
2x20Watt@4OΩas the default amplifier output.
Bridge connection function. User can switch the amplifier to be 1x40Watt@8OΩby
bridge connection.
48V phantom power to support condenser microphone.
MIC port supports balance/unbalance signal, with which it can suppress the external
noise effectively.

HDMI/IR/RS232 Twisted Pair Extender
Altimium 8 www.altimium.com
5. Specification
Model
Spec
EXT.HDMI70IRSET
EXT.HDMI70IRSER
Input
Input Signal
1 HDMI,1 IR & 1 RS232
1 IR, 1 RJ-45 & 1 RS232
Input Connector
HDMI female, 3.5mm mini
jack, 3p captive screw
3.5mm mini jack, RJ-45, 3p
captive screw
Video Signal
HDMI1.4
HDMI1.4
Audio
Digital audio, can be
transmitted through RGB or
Y, Cr, Cb lines
Digital audio, can be
transmitted through RGB or Y,
Cr, Cb lines
Output
Output
1 RJ-45, 1 IR, 1 RS232
(through RJ-45)
1 HDMI, 1 IR, 1 RS232
(through RJ-45)
Output Connector
RJ-45, 3.5mm mini jack
HDMI female, 3.5mm mini jack
Video signal
HDMI1.4
HDMI1.4
Transmission
Mode
HDBaseT
General
Resolution Range
800x600 ~ 1920x1200, 3D/4Kx2K
Transmission
Distance
Max distance 60m
Gain
0dB ~ 10dB@100MHz
Differential Phase
Error
±10°@ 135MHz_100M
SNR
>70dB@ 100MHz-100M
Bandwidth
10.2Gbps
Return Lost
＜-30dB@5KHz
THD
＜0.005%@1KHz
HDMI Standard
Support HDMI1.4 and HDCP
Min.～Max. Level
＜0.3V ~ 1.45Vp-p
Impedance
75Ω
Temperature
-20 ~ +70℃
Humidity
10% ~ 90%
Power Supply
DC 5V
Power
Consumption
6.5W
Dimension
(W*H*D)
77 x 30 x 110 mm
77 x 30 x 110 mm
Net Weight
0.2Kg
0.2Kg

HDMI/IR/RS232 Twisted Pair Extender
Altimium 9 www.altimium.com
NOTE: All nominal levels are at ±10%.
6. Panel Drawing
6-1 EXT.HDMI70IRSET
6-2 EXT.HDMI70IR

HDMI/IR/RS232 Twisted Pair Extender
Altimium 10 www.altimium.com
7. Troubleshooting & Maintenance
Problems
Causes
Solutions
Output images in display
show with ghost
Incorrect setting on the
display
Check the display’s setting
A cable of bad quality
Try another high quality
connection cable
No output image when
switching
No signal at the input /
output end
Check with oscilloscope or
multimeter if there is any
signal at the input / output
end.
Fail or loose connection
Make sure the connection
is good
The extender is broken
Send it to authorized
dealer for repairing.
Cannot control the device
by control device (e.g. a
PC) through RS232 port
Wrong RS232
communication parameters
Make sure the RS232
communication parameters
are correct.
The device has already
been broken
Send it to authorized
dealer for repairing.
Static becomes stronger
when connecting the video
connectors
Bad grounding
Check the grounding and
make sure it is connected
well.
Cannot control the device
by RS232 / IR
The device has already
been broken
Send it to authorized
dealer for repairing.
If your problem persists after following the above troubleshooting steps, seek further
help from authorized dealer or our technical support.

HDMI/IR/RS232 Twisted Pair Extender
Altimium 11 www.altimium.com
8. After-sales Service
If there appear some problems when running the device, please check and deal with the
problems reference to this user manual. Any transport costs are borne by the users
during the warranty.
1) Product Limited Warranty: We warrants that our products will be free from defects
in materials and workmanship for three years, which starts from the first day you
buy this product (The purchase invoice shall prevail).
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence
that the unit is within the Warranty period must be presented to obtain warranty
service.
2) What the warranty does not cover:
Warranty expiration.
Factory applied serial number has been altered or removed from the product.
Damage, deterioration or malfunction caused by:
Normal wear and tear
Use of supplies or parts not meeting our specifications
No certificate or invoice as the proof of warranty.
The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
Damage caused by force majeure.
Servicing not authorized
Any other causes which does not relate to a product defect
Delivery, installation or labor charges for installation or setup of the product
3) Technical Support: Email to our after-sales department or make a call, please
inform us the following information about your cases.
Product version and name.
Detailed failure situations.
The formation of the cases.

ALTIMIUM
587 Avenue Blaise Pascal
77550 MOISSY-CRAMAYEL
Tél : [phone]
Fax: [phone]
Mail: [email protected]
Web: www.altimium.com