Altimium FO1DV-4KT User manual

FO1DV-4K
Mini 4K DVI Fiber Extender
All Rights Reserved
Version: FO1DV-4K_2014V1.0
User Manual

4K DVI Optical Fiber Extender
Altimium www.altimium.com
2
Preface
Read this user manual carefully before using this product. Pictures shown in this manual
is for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till March 2015. Any changes of
functions and parameters since then will be informed separately. Please refer to the
dealers for the latest details.
All product function is valid till 2015-03-16.
Trademarks
Product model, ALTIMIUM and its logo are trademarks of Altimium. Any
other trademarks mentioned in this manual are acknowledged as the properties of the
trademark owner. No part of this publication may be copied or reproduced without the
prior written consent of Altimium.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

Altimium www.altimium.com
3
4K DVI Optical Fiber Extender
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
Unpack the equipment carefully and save the original box and packing material for
possible future shipment
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
Refer all servicing to qualified service personnel.
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
Do not put any heavy items on the extension cable in case ofextrusion.
Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
Install the device in a place with fine ventilation to avoid damage caused by
overheat.
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the moduleimmediately.
Do not twist or pull by force ends of the optical cable. It can causemalfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
Unplug the power cord when left unused for a long period oftime.
Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electricalwastes.

Altimium www.altimium.com
4
4K DVI Optical Fiber Extender
Introduction
FO1DV-4K is a mini DVI optical fiber extender for 4K resolution. It contains a
transmitter module and a receiver module. Compatible with HDMI1.4, it transmits high-
definition DVI/ HDMI (max 3840x2160@30Hz) up to 300m/ 1km over qualified OM3
multi-mode/ single mode cable. It also offers manual EDID management to ensure
reliable AV distribution.
Package List
1*FO1DV-4K (Tx and Rx are
included) 2* Power Adapter (DC 5V
1A)
1*User Manual
Notes：Check whether all the items listed above are included in your package. If not,
contact your dealer to make up.
Appearances
FO1DV-4KT: ② Link led: Illuminate blue when
connected with source; blink blue
when capturing EDID data
There are a Power led on its rear
panel, it will illuminate red when
powered on.
③ EDID Reader: Stick to capture the
EDID data of the connected display for
reliable transmission
④ Power: Insert a DC 5V 1A power
adapter here
⑤ Optical Out: Connect with Optical In
of Rx via a fiber cable

Altimium www.altimium.com
5
4K DVI Optical Fiber Extender
FO1DV-4KR:
② Link led: Illuminate blue when
connected with source; blink blue
when capturing EDID data
There are a Power led on its rear
panel, it will illuminate red when
powered on.
③ Power: Insert a DC 5V 1A power
adapter here
④ Optical Out: Connect with Optical
Out of Tx via a fiber cable
Connection:
The figure below illustrates a typical connection that can be utilized with FO1DV-4K:
Step1. Connect the transmitter and a DVI source device (e.g. a PC) directly or over a
DVI cable.
Step2. Connect the Optical Out port of the transmitter to the Optical In port of the
receiver with an optical fiber cable.
Step3. Connect the receiver and a DVI sink device (e.g. a monitor) directly or over a DVI
cable.
Step4. Plug DC 5V power adapters to the Power ports of both the transmitter and the
receiver.

Altimium www.altimium.com
6
4K DVI Optical Fiber Extender
Important to know:
1) To ensure normal and reliable transmission, plug the DVI display to the DVI In port of
the transmitter, and stick the EDID Reader to manually capture the EDID data of the
display.
2) Utilize OM3 optical fiber cable to connect the transmitter& receiveronly.
Specification
Model
Spec FO1DV-4KT FO1DV-4KR
Input
Input Signal
1 DVI
1 Optical Fiber
Input Connector
Female DVI-D
LC connector
Signal
Digital AV signal, compliant
with HDMI1.4
Optical Fiber
Output
Output
1 Optical Fiber
1 HDMI
Output Connector
LC connector
Female DVI-D
Signal Optical Fiber
Digital AV signal, compliant
with HDMI1.4
General
Resolution
640x480@60Hz, 640x480@70Hz, 640x480@72Hz,
640x480@75Hz, 800x600@60Hz, 800x600@70Hz,
800x600@72Hz, 800x600@75Hz, 1024x768@60Hz,
1024x768@70Hz, 1024x768@75Hz, 1280x720@60Hz,
1280x1024@60Hz, 1280x1024@75Hz,
1360x768@60Hz, 1440x900@60Hz, 1600x1200@60Hz,
1920x1080@60Hz, 1920x1200@60Hz,
3840x2160@24Hz, 3840x2160@25Hz,
3840x2160@30Hz
Audio Format
PCM, Dolby Digital, DTS, DTS-HD
HDMI Standard
HDMI1.4
Transmission Distance
≤
1km via single mode fiber
≤
300m via OM3 multimode fiber
Temperature
0 ~ 50
℃
Reference Humidity
10% ~ 90%
Power Supply
Input: AC 100~240V, 50/60Hz; Output: DC 5V 1A
Power Consumption
≤
4.35w
Dimension (W*H*D)
69.5*10.2*40 mm
69.5*10.2*40 mm
Weight
63g
63g

Altimium www.altimium.com
7
4K DVI Optical Fiber Extender
Troubleshooting & Maintenance
Problems Causes Solutions
Color losing or vague/
double image in HDMI
display
Poor quality of the optical
fiber cable
Change for qualified OM3
cable.
Power led is off, operations
don’t work
Not been powered Power up the unit
Poor contact of power port Make sure power adapter
is in well contact
No output on the display
Source/ Display is off Turn on the source/ display
Poor contact of DVI ports
Check the DVI ports one by
one to make sure they’re in
well contact.
The display doesn’t
support the resolution
Connect the display to the
transmitter and capture its
EDID data before using.
Input signal is with HDCP Change for signals that are
not with HDCP.
If your problem persists after following the above troubleshooting steps, seek further
help from authorized dealer or our technical support.

Altimium www.altimium.com
8
4K DVI Optical Fiber Extender
After-sales Service
If there appear some problems when running the device, please check and deal with the
problems referring to this user manual. Any transport costs are borne by the users
during the warranty.
1) Product Limited Warranty: ALTIMIUM warrants that its products will be free from
defects in materials and workmanship for two years, which starts from the first
day you buy this product (The purchase invoice shallprevail).
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence
that the unit is within the Warranty period must be presented to obtain warranty
service.
2) What the warranty does not cover (servicing available for afee):
Warranty expiration.
Factory applied serial number has been altered or removed from theproduct.
Damage, deterioration or malfunction caused by:
Normal wear and tear
Use of supplies or parts not meeting ourspecifications
No certificate or invoice as the proof of warranty.
The product model showed on the warranty card does not match with the
model of the product for repairing or had beenaltered.
Damage caused by force majeure.
Servicing not authorized by ALTIMIUM
Any other causes which does not relate to a productdefect
Delivery, installation or labor charges for installation or setup of the product
3) Technical Support: Email to our after-sales department or make a call, please
inform us the following information about yourcases.
Product version and name.
Detailed failure situations.
The formation of the cases.
Remarks: For any questions or problems, please try to get help from your local
distributor, or email ALTIMIUM at: [e-mail]

Altimium www.altimium.com
9
4K DVI Optical Fiber Extender
ALTIMIUM
587 Avenue Blaise Pascal
77550 MOISSY-CRAMAYEL
Tél : [phone]
Fax: [phone]
Mail: [e-mail]
Web: www.altimium.com