Altronix TROVE T2SSK1Q User manual

T2SSK1Q
8 Door Kit with Fused Outputs
Fully assembled kit includes:
- Trove2 enclosure with
TSS2 Altronix/Lenel-S2 (S2 Security Platform) backplane
- (1) eFlow104NB - Power Supply/Charger
- (1) eFlow102NB - Power Supply/Charger
- (1) LINQ8ACM - Networked Fused Access Power Controller
- (1) LINQ8PD - Networked Fused Power Distribution Module
- (1) NetWay5B - 5-Port Hardened Switch Board
- (1) RSB2 - Rocker Switch Bracket with Two (2) Rocker Switches
T2SSK2Q
16 Door Kit with PTC Outputs
Fully assembled kit includes:
- Trove2 enclosure with
TSS2 Altronix/Lenel-S2 (S2 Security Platform) backplane
- (1) eFlow104NB - Power Supply/Charger
- (1) eFlow102NB - Power Supply/Charger
- (2) LINQ8ACM - Networked Fused Access Power Controllers
- (2) LINQ8PD - Networked Fused Power Distribution Modules
- (1) NetWay5B - 5-Port Hardened Switch Board
- (1) BR1 - Mounting Bracket
- (1) RSB2 - Rocker Switch Bracket with Two (2) Rocker Switches
T2SSK1DQ
8 Door Kit with PTC Outputs
Fully assembled kit includes:
- Trove2 enclosure with
TSS2 Altronix/Lenel-S2 (S2 Security Platform) backplane
- (1) eFlow104NB - Power Supply/Charger
- (1) eFlow102NB - Power Supply/Charger
- (1) LINQ8ACMCB - Networked PTC Access Power Controller
- (1) LINQ8PDCB - Networked PTC Power Distribution Module
- (1) NetWay5B - 5-Port Hardened Switch Board
- (1) RSB2 - Rocker Switch Bracket with Two (2) Rocker Switches
T2SSK2DQ
16 Door Kit with PTC Outputs
Fully assembled kit includes:
- Trove2 enclosure with
TSS2 Altronix/Lenel-S2 (S2 Security Platform) backplane
- (1) eFlow104NB - Power Supply/Charger
- (1) eFlow102NB - Power Supply/Charger
- (2) LINQ8ACMCB - Networked PTC Access Power Controllers
- (2) LINQ8PDCB - Networked PTC Power Distribution Modules
- (1) NetWay5B - 5-Port Hardened Switch Board
- (1) BR1 - Mounting Bracket
- (1) RSB2 - Rocker Switch Bracket with Two (2) Rocker Switches
Rev. TSSK2Q_020524
Installing Company: _________________________ Service Rep. Name: __________________________________________
Address: _________________________________________________________ Phone #: _________________________
All registered trademarks are property of their respective owners. More than just power.™
Installation Guide
Please refer to the included corresponding Sub-Assembly Installation Guides for further information.
Access & Power Integration
Altronix/Lenel-S2 (S2 Security Platform) Kits
Models Include:

- 2 - Trove2 S2 Q Kits Installation Guide
Overview:
Altronix Trove S2 kits are pre-assembled and consist of Trove enclosures/backplanes with factory installed Altronix power supply/chargers
and sub-assemblies. Both kits accommodate Lenel-S2 (S2 Security Platform) S2-INST Installation Kit for S2 Network Node for up to eight (8)
(T2SSK1(D)Q) or suxteen (16) (T2SSK2(D)Q) doors in a single enclosure.
Configuration Chart:
Altronix
Model
Number 120VAC 60Hz Input Current (A) Power Supply Board Input Fuse Rating Power Supply Board Battery Fuse Rating
Nominal
DC Output
Voltage
Maximum Supply Current for Main and Aux. Outputs on Power Supply board and LINQ8ACM(CB) Access Power Controllers’ outputs Fail-Safe/Fail-Secure Outputs Additional Fuse (PTC) Protected Outputs Current Per LINQ8ACM(CB) and LINQ8PDCB Output (A) LINQ8ACM(CB) Board Input Fuse (PTC) Rating LINQ8ACM(CB) Board Output Fuse (PTC) Rating LINQ8PD(CB) Board Input Fuse (PTC) Rating LINQ8PD(CB) Board Output Fuse (PTC) Rating NetWay5B Switch Input NetWay5B Switch Outputs
[DC] [Aux]
Output Range (VDC) Output Range (VDC)
T2SSK1Q
7eFlow104NB:
6.3A/250V
eFlow102NB:
5A/250V
15A/
32V
eFlow104NB
eFlow104NB:
24VDC @ 9.4A
eFlow102NB:
12VDC @ 9.7A
8 8
2.5 15A/
32V
3A/
32V
15A/
32V
3A/
32V 24VDC
Five (5)
data
ports
T2SSK1DQ 20.17-
26.4
20.28-
26.4 2.0 9A 2.5A 15A/ 32V 2.5A
T2SSK2Q
7
eFlow102NB
16 16
2.5 15A/
32V
3A/
32V
15A/
32V
3A/
32V 24VDC
Five (5)
data
ports
T2SSK2DQ 9.7-
13.2
10.03-
13.2 2.0 9A 2.5A 15A/ 32V 2.5A
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction.
Product is intended for indoor use only.
1. Remove backplane from enclosure. Do not discard hardware.
2. Mark and predrill holes in the wall to line up with the top three keyholes in the enclosure. Install three upper fasteners and screws
in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the three upper screws; level and secure.
Mark the position of the lower three holes. Remove the enclosure. Drill the lower holes and install the three fasteners. Place the
enclosure’s upper keyholes over the three upper screws. Install the three lower screws and make sure to tighten all screws.
3. Mount included UL Listed tamper switch (Altronix Model TS112 or equivalent) in desired
location, opposite hinge. Slide the tamper switch bracket onto the edge of the enclosure
approximately 2” from the right side (Fig. 1, pg. 2). Connect tamper switch wiring to the
Access Control Panel input or the appropriate UL Listed reporting device.
To activate alarm signal open the door of the enclosure.
4. Mount S2-INST Installation Kit to backplane, refer to pages 3, 4.
5. Refer to the eFlow Power Supply/Charger Installation Guide for eFlow104NB and
eFlow102NB and corresponding Sub-Assembly Installation Guides for LINQ8ACM(CB),
LINQ8PD(CB) and NetWay5B for further installation instructions.
Hardware:
Fig. 1
Tamper Switch
(included)
To Access Control Panel or
UL Listed Reporting Device
Edge of
Enclosure
Enclosure
Lock Nut

Trove2 S2 Q Kits Installation Guide - 3 -
T2SSK1(D)Q: Access Controller Position Chart for the S2-INST Installation Kit:
1. Align S2-INST mounting holes with pems on TSS2 (Fig. 2, pg. 3).
2. Attach S2-INST to backplane with lock nuts (provided) (Fig. 2a, pg. 3).
3. Mount backplane to enclosure with hardware.
4. Fasten TSS2 backplane to Trove2 enclosure utilizing hardware (provided).
Fig. 2
Altronix eFlow104NB
– DC +– BAT +
L G N
NC C NO NC C NO
AC FAIL BAT FAIL
TRIGGER EOL
SUPERVISED
AC DCAC1 NO GND
RESET + AUX -
--- BAT +
L G N 1 min enable
2 hr disable
--- DC +
Altronix eFlow102NB
Netway5B
Altronix Corp.
Brooklyn, NY US
PORT 2
12/24V
+–
PORT 3 PORT4 PORT 5
PORT 1
POE INPUT
Altronix
NetWay5B
S2-INST
Installation
Kit for
S2 Network
Node
COM -
+PWR2 +PWR1
+ PWR1 - + PWR2 -
COM -
F- R- GND GND C
F+ R+ EOL RST NC FACP + PS1 - + BAT - + PS2 - + BAT -
NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM
+PWR2
+PWR1
NC C NO
BAT AC
Tamper
NC C NO
+ INP1 -+INP2 -+INP3-+INP4 -
+ INP5 -+INP6 -+INP7-+INP8 -
Altronix LINQ8ACM(CB)
AC FAIL NC C NC C BAT FAIL
+ INP1 - + INP2- +BAT IN- +BAT OUT-
BAT AC NC C NC C
Altronix LINQ8PD(CB)
RSB2
Pem
Lock nut
S2-INST Bracket
Backplane
Fig. 2a

- 4 - Trove2 S2 Q Kits Installation Guide
T2SSK2(D)Q: Access Controller Position Chart for the S2-INST Installation Kit:
1. Align S2-INST mounting holes with pems on TSS2 (Fig. 3, pg. 4).
2. Attach S2-INST to backplane with lock nuts (provided) (Fig. 3a, pg. 4).
3. Mount backplane to enclosure with hardware.
4. Fasten TSS2 backplane to Trove2 enclosure utilizing hardware (provided).
Fig. 3
Altronix
eFlow104NB
– DC +– BAT +
L G N
S2-INST
Installation
Kit for
S2 Network
Node
NC C NO NC C NO
AC FAIL BAT FAIL
TRIGGER EOL
SUPERVISED
AC DCAC1 NO GND
RESET + AUX -
--- BAT +
L G N 1 min enable
2 hr disable
--- DC +
Altronix
eFlow102NB
Netway5B
Altronix Corp.
Brooklyn, NY US
PORT 2
12/24V
+–
PORT 3 PORT 4 PORT5
PORT 1
POE INPUT
Altronix
NETWAY5B
is mounted to
the side wall
of enclosure
utilizing BR1
mounting plate
COM -
+PWR2 +PWR1
+ PWR1 - + PWR2 -
COM -
F- R- GND GND C
F+ R+ EOL RST NC FACP + PS1 - + BAT - + PS2 - + BAT -
NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM
+PWR2
+PWR1
NC C NO
BAT AC
Tamper
NC C NO
+ INP1 -+INP2 -+INP3 -+INP4 -
+ INP5 -+INP6 -+INP7 -+INP8 -
Altronix LINQ8ACM(CB)
COM -
+PWR2 +PWR1
+ PWR1 - + PWR2 -
COM -
F- R- GND GND C
F+ R+ EOL RST NC FACP + PS1 - + BAT - + PS2 - + BAT -
NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM NO C NC COM
+PWR2
+PWR1
NC C NO
BAT AC
Tamper
NC C NO
+ INP1 -+INP2 -+INP3 -+INP4 -
+ INP5 -+INP6 -+INP7 -+INP8 -
Altronix LINQ8ACM(CB)
AC FAIL NC C NC C BAT FAIL
+ INP1 - + INP2- +BAT IN- +BAT OUT-
BAT AC
NC C NC C
Altronix
LINQ8PD(CB)
AC FAIL NC C NC C BAT FAIL
+ INP1 - + INP2- +BAT IN- +BAT OUT-
BAT AC
NC C NC C
Altronix
LINQ8PD(CB)
RSB2
Pem
Lock nut
S2-INST Bracket
Backplane
Fig. 3a

Trove2 S2 Q Kits Installation Guide - 5 -
Notes:

- 6 - Trove2 S2 Q Kits Installation Guide
Notes:

Trove2 S2 Q Kits Installation Guide - 7 -
Notes:

- 8 - Trove2 S2 Q Kits Installation Guide
Enclosure Dimensions (H x W x D):
27.25” x 21.75” x 6.5” (692.2mm x 552.5mm x 165.1mm)
6.75” (171.5mm)8.25” (209.5mm)
8.00” (203.2mm)
2.00” (50.8mm)
2.00” (50.8mm)
1.25” (31.8mm)
1.25” (31.8mm)
5.25” (133.4mm) 5.25” (133.4mm)7.00” (177.8mm)
1.25” (31.8mm)
6.25” (158.8mm) 19.80” (502.9mm)
1.00” (25.4mm)
27” (685.8mm)
1.5”
(38.1mm)
2.00” (50.8mm) 2.00” (50.8mm)
3.5”(88.9mm) 3.5”(88.9mm)
21.50” (546.1mm)
5.25” (133.35mm) 5.25” (133.35mm)
6.25” (158.8mm)
1.25”
(31.8mm)
0.85” (21.6mm)
0.5625” (14.3mm)
2.415” (61.3mm)
0.685” (17.4mm)
1.77”
(45mm)
0.885” (22.5mm)
1.125” (28.3mm)
Knockouts
2.00” (50.8mm) 2.00” (50.8mm)
Altronix is not responsible for any typographical errors.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
140 58th Street, Brooklyn, New York 11220 USA | phone: [phone] | fax: [phone]
web site: www.altronix.com | e-mail: [email protected] | Lifetime Warranty
IITrove S2 Q Kits B05X
MEMBER