Altronix ALTV2432220 Series User manual

ALTV2432220 Series
CCTV Power Supplies
Installation Guide
Models Include:
• ALTV2432220 • ALTV2432CB220
- 24VAC @ 8A (200VA) - 24VAC @ 8A (200VA)
or 28VAC @ 7A (200VA). or 28VAC @ 7A (200VA).
- Thirty-two (32) Fuse Protected Outputs. - Thirty-two (32) PTC Protected Outputs.
• ALTV2432350220 • ALTV2432350CB220
- 24VAC @ 14A (350VA) - 24VAC @ 14A (350VA)
or 28VAC @ 12.5A (350VA). or 28VAC @ 12.5A (350VA).
- Thirty-two (32) Fuse Protected Outputs. - Thirty-two (32) PTC Protected Outputs.
• ALTV2432600220 • ALTV2432600CB220
- 24VAC @ 28A (700VA) - 24VAC @ 28A (700VA)
or 28VAC @ 25A (700VA). or 28VAC @ 25A (700VA).
- Thirty-two (32) Fuse Protected Outputs. - Thirty-two (32) PTC Protected Outputs.
Rev. 122007

Overview:
ALTV2432220 Series CCTV Power Supplies provide 24VAC/28VAC distributed via thirty-two (32) fuse or PTC protected
outputs for powering CCTV cameras, heaters, and other video accessories.
Thirty-Two (32) Output ALTV2432220 Reference Chart:
Altronix
Model Number
Output
Voltage
Total
Output
Current
(Power)
Number
of
Outputs
PTC
Protected
Outputs
Fuse
Protected
Outputs
Output Current
(max per
output)
220VAC
50/60Hz Input
Current
ALTV2432220 24VAC 8A
32
------ P3.5A
1.5A
28VAC 7A
ALTV2432CB220 24VAC 8A P------ 2.5A
28VAC 7A
ALTV2432350220 24VAC 14A ------ P3.5A
28VAC 12.5A
ALTV2432350CB220 24VAC 14A P------ 2.5A
28VAC 12.5A
ALTV2432600220 24VAC 28A ------ P3.5A
3A
28VAC 25A
ALTV2432600CB220 24VAC 28A P------ 2.5A
28VAC 25A
Specifications:
Installation Instructions:
1. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the
enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure’s
upper keyholes over the two upper screws; level and secure. Mark the position of the lower two holes. Remove the
enclosure. Drill the lower holes and install the three fasteners. Place the enclosure’s upper keyholes over the two
upper screws. Install the two lower screws and make sure to tighten all screws (Enclosure Dimensions, pg. 7).
Secure enclosure to earth ground.
2. Turn OFF main switch on the unit (Figs. 1-3, pgs. 4-6).
3. All units are factory set for 24VAC operation.
For 28VAC operation, adjust unit prior to mounting and applying power as follows: Change the wire position so that
the black wire [28V] is connected to the terminal marked [P] and the yellow wire [24V] is connected to the
terminal marked [S].
4. Connect unswitched AC circuit (220VAC, 50/60Hz) as follows: Green branch wire (ground) connects to the terminal
marked , Line connects to the terminal marked [L], and Neutral connects to the terminal marked [N] of the Inlet
Appliance Connector. (Figs. 1-3, pgs. 4-6). Use 18 AWG or larger for all power connections.
5. Measure output voltage before connecting devices. This helps avoiding potential damage.
CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting
the output voltage.
6. Connect devices to the terminals marked [1P - 1N] through [16P - 16N] on PD16W/PD16WCB board
(Figs. 1-3, pgs. 4-6), carefully observing polarity. Terminals marked [1P - 16P] are of the same polarity.
7. Turn main switch on the unit to the ON (RESET) position (Figs. 1-3, pgs. 4-6).
8. Green LED(s) will illuminate when unit is powered.
9. Upon completion of the wiring, secure enclosure door with the screws (supplied).
- 2 - ALTV2432220 Series
Agency Listing:
• CE Approved.
Input:
• 220VAC, 50/60Hz.
Output:
• Thirty two (32) fuse or PTC protected outputs.
• 24VAC or 28VAC output.
• Outputs are rated @ 3.5A (fused) or 2.5A (PTC).
Features:
• Secondary fuse rated @ 5A/250V.
• AC power LED.
• Power ON/OFF switch.
• Unit maintains camera synchronization.
Enclosure Dimensions (H x W x D approx.):
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm).
Power
Switch
Used on PTC Model
(ALTV2432CB220)
Connected
to Door
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678
9 10 11 12 13 14 15 16
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678
9 10 11 12 13 14 15 16
PTCs
Power Distribution Module
PN
N
P
P
N
NPS
XFMR Input
PD16W
common
outputs
protected
outputs
12345678
9 10 11 12 13 14 15 16
PN
XFMR
XFMR
24VAC Output
(Factory Set)
28VAC Output
NPS NP
Black
Yellow
NPS NP
Black
Yellow
Red
Lead
Black
Lead
220VAC Input,
50/60 Hz
4A
250V

CAUTION: Equipment must be installed/serviced by authorized/trained personnel only.
Shut branch circuit power before installing/servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. This
installation should be made by qualified service personnel and should conform to the National Electrical
Code and all local codes. Use 75 C or higher rated UL insulated wiring for connecting the unit to the mains.
Terminal Identification:
PD16W - Power Distribution Module
Terminal Legend Function/Description
1P - 16P AC output.
1N - 16N AC output.
The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the
presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of
sufficient magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: To reduce the risk of electric shock do not open enclosure. There are
no user serviceable parts inside. Refer servicing to qualified service personnel.
ALTV2432220 Series - 3 -

- 4 - ALTV2432220 Series
Fig. 1
ALTV2432220 • ALTV2432CB220
Power
Switch
Used on PTC Model
(ALTV2432CB220)
Connected
to Door
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678
9 10 11 12 13 14 15 16
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678
9 10 11 12 13 14 15 16
PTCs
Power Distribution Module
PN
N
P
P
N
NPS
XFMR Input
PD16W
common
outputs
protected
outputs
12345678
9 10 11 12 13 14 15 16
PN
XFMR
XFMR
24VAC Output
(Factory Set)
28VAC Output
NPS NP
Black
Yellow
NPS NP
Black
Yellow
Red
Lead
Black
Lead
220VAC Input,
50/60 Hz
4A
250V
24VAC or 28VAC
fused or PTC protected outputs
1 through 16.
24V
Hookup
Brown
Yellow
Black
28V
Hookup
Brown
Yellow
Black
Terminal Blocks for Fig. 1

Fig. 2
ALTV2432350220 • ALTV2432350CB220
Black Lead
Red Lead
Used on PTC Model
(ALTV2432350CB220)
XFMR*
Connected
to Door
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678
9 10 11 12 13 14 15 16
PTCs
Power Distribution Module
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678
9 10 11 12 13 14 15 16
NP
PN
P
N
NPS
XFMR Input
PD16W
common
outputs
protected
outputs
12345678
9 10 11 12 13 14 15 16
PN
Power Switch
24VAC Output
(Factory Set)
28VAC Output
NPS NP
Black
Yellow
NPS NP
Black
Yellow
220VAC Input,
50/60 Hz
4A
250V
24VAC or 28VAC
fused or PTC protected outputs
1 through 16.
24V
Hookup
Brown
Yellow
Black
28V
Hookup
Brown
Yellow
Black
Terminal Blocks for Fig. 2
ALTV2432220 Series - 5 -

- 6 - ALTV2432220 Series
Power
Switch
XFMR*
Used on PTC Model
(ALTV2432600CB220)
XFMR*
Connected
to Door
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678
9 10 11 12 13 14 15 16
3.5A 250V
For continuous protection against risk of fire
replace fuses with same type and rating.
common
outputs
protected
outputs
P
N
NPS
XFMR Input
PD16W
12345678
9 10 11 12 13 14 15 16
PTCs
Power Distribution Module
PN
N
P
P
N
NPS
XFMR Input
PD16W
common
outputs
protected
outputs
12345678
9 10 11 12 13 14 15 16
PN
24VAC Output
(Factory Set)
28VAC Output
NPS NP
Black
Yellow
NPS NP
Black
Yellow
4A
250V
220VAC Input,
50/60 Hz
Fig. 3
ALTV2432600220 • ALTV2432600CB220
24VAC or 28VAC
fused or PTC protected outputs
1 through 16.
24V
Hookup
Brown
Yellow
Black
28V
Hookup
Brown
Yellow
Black
Terminal Blocks for Fig. 3

ALTV2432220 Series - 7 -
Enclosure Dimensions (H x W x D approximate):
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
1.40”
(36mm)
1.40”
(36mm)
4.85”
(123mm)
4.85”
(123mm)
1.40”
(36mm)
1.40”
(36mm)
5.10”
(130mm)
5.10”
(130mm)
13.0”
(330mm)
5.10”
(130mm)
6.5625”
(167mm)
1.20”
(31mm)
1.20”
(31mm) 1.20”
(31mm)
3.25”
(83mm)
3.25”
(83mm)
3.25”
(83mm)
3.25”
(83mm)
1.0”
(25mm)
1.0”
(
25mm
)
10.5”
(
267mm
)
1.0”
(
25mm
)
1.0”
(25mm)
0.75”
(19mm)
0.75”
(19mm)
0.9375”
(24mm)
0.9375”
(24mm)
11.0”
(279mm)
12.5”
(318mm)

- 8 - ALTV2432220 Series
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: [phone]
web site: www.altronix.com, e-mail: [email protected]. Lifetime Warranty, Made in U.S.A.
IIALTV2432220Series A12P
Notes:
MEMBER