Amada AMPJ04 User manual

（A）
封
面
1 2 3 4
2 431
D
E
C
B
A
F
E
D
C
B
A
(.XXX)
##
.XXX
##
AMPJ04-Manual-XF
0-30 ±1
30-150 ±2
150-300 ±3
300-450 ±4
>450 ±5
00
860-00152-00
1 1
技术要求：
1、材质：105g 铜板纸
2、展开尺寸：A4，如图所示折叠成型为A5，4P
3、颜色：单色
4、印刷：印刷图档见后续页，双面印刷
5、装订方式：折页
KK
2022/03/03
刀模线：
内折线：
注：此页为技术说明，非印刷内容
297mm
210mm
折页效果图：
展开尺寸图：
深圳市倍思奇创
新科技有限公司

Inflatable Projection Screen
Instruction Manual （A）
Model: AMPJ04
Thank you for choosing this AMADA product! At AMADA, we strive to provide
you with the best quality products and services in the industry. Should you
have any issues, please don't hesitate to contact us.
[email protected]
05 x6
Ground Stake
07 x1
Big Storage Bag
06 x1
Small Storage Bag
03 x1
Air Blower
02 x1
Movie Screen
01 x1
Inflatable Frame
04 x6
Nylon Tether
Supplied Parts and Hardware
• If you do not understand the instructions or have any questions or concerns, please
contact customer service at [email protected].
• Please review the basic precautions listed below before using this product.
1. When moving the product, be careful to avoid trees, branches, bushes, or any undue
strain or stress that may damage the product including connections and wires.
2. When not in use, store neatly in a cool, dry location protected from sunlight.
3. The air motor may not operate in temperatures below 10°F (-14°C).
WARNING: Protect the electric fan and power cord from direct exposure to water. This
precaution will reduce the risk of electrical shock.
WARNING: Remove all plastic fasteners and tags. These are part of the packaging and
should be discarded.
WARNING: This product is to be assembled by adults only.
CAUTION: Do not attempt to inflate the product during strong winds. If it becomes too
windy for safe operation, allow the product to deflate and wait for better conditions
before re-inflating.
1. This product is not intended for permanent installation or use.
2. Do not mount or place the product near gas or electric heaters, fireplaces, candles, or
other similar sources of heat.
3. Do not secure the product wiring with staples or nails or place it on sharp hooks.
4. Do not leave the product unattended when plugged into a power source.
5. This is an electrical product, not a toy. To avoid the risk of fire, burns, personal injury,
and electrical shock, keep blower and wiring away from children and pets.
6. Do not use this product for anything other than its intended purpose.
7. Do not hang ornaments or other objects from cord.
8. Do not remove or modify the extension cord.
9. Do not cover the product with a cloth, paper, or any material not part of the product
when in use.
10. Inspect the product carefully before each use. Do not use any products with cut,
damaged, cracked, frayed, or loose wiring and/or connections.
IMPORTANT – PLEASE READ ALL INSTRUCTIONS
USE AND CARE INSTRUCTIONS
SAFETY INSTRUCTIONS
01

3-1
Tie the Nylon Tether [04] through the loop on the Inflatable Frame [01].
Step 3
TROUBLESHOOTING CHECKLIST:
Fold for Storage
04
03
If the product is not inflating, the problem may be:
1. The power source is disabled or the cord may be unplugged.
2. Debris may be obstructing airflow to the motor.
3. Please inspect the product carefully for rips or tears.
02
01
01
03
Step 1
Step 2
02
1-2 Align the clips from Movie Screen to Inflatable Frame, then connect the clips one by
one.
NOTE: This inflation process may
take a few minutes. Make sure the
air intake is clear of fabric or other
obstruction.
2-1 Attach the air inlet at the bottom
of the Inflatable Frame [01] to the Air
Blower [03].
2-2 Plug cord into
the receptacle or
other outlet device
to inflate your
Inflatable Frame
[01].
NOTE：
• To prevent air leakage, do
not detach the HOOK & LOOP
when inflating.
• You can detach the HOOK &
LOOP for quick deflation when
deflating.
860-00152-00 Rev00
07
06
01 02
05
3-2 Insert the Ground Stakes [05] into
the Nylon Tether [04].
05
3-3 Stretch the Nylon Tether [04] until
taut, then hammer the Ground Stakes
[05] into the ground at an angle of
45-60 degrees.
1-1 Fully unfold the Movie Screen and Inflatable Frame on a clear and flat area. Ensure
the clips are facing up.
NOTE: Ensure the
ropes on the air
inlet is tied firmly
on the air blower.
Movie Screen
Inflatable Frame
02
01
04/05
01/02