Amart Furniture FRESIAN 72360 User manual

子直径和桌子高度）
Imported by Amart Furniture Pty Ltd, Brisbane, Qld Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
FRESIAN ROUND DINING TABLE
ITEM CODE：72360
Imported by Amart Furniture Pty Ltd, Brisbane ,Qld, Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
172360
1000mm
780mm

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
272360

M8X16mm M6X16mm
M5 ø8x15mm
PARTS LIST
A TABLE TOP
B METAL LEG
C METAL PLATE
D METAL CONNECTOR
E BOLT
F BOLT
G ALLEN KEY
H ADJUSTABLE FOOT
372360

STEP
1:
•Prepare a floor or benchtop with a protective blanket or carboard.
•Stand the metal frame(B) on floor, as shown below. Have another person hold this.
•Connect the metal plate(C) and leg(B), as shown below.
•Secure with 8x bolts(E).
•Fasten with Allen Key(G)
STEP 2:
•Place the Table Top (A) on the ground with the 4 bolt holes facing up.
•Attached the leg frame to Table Top(A) with 4xBolt (E)
•Attached the Metal Connector (D) to Metal Leg (B) with 4x Bolt (F).
•Fasten with Allen Key(G)
•Loosely attach the adjustable feet(H) to metal legs (B)
472360

STEP
3: With the aid of a 2nd person, carefully
•If there is unevenness, screw in/out feet(H) to balance the unit.
ASSEMBLY IS COMPLETE
ASSEMBLY IS COMP
572360

672360
CARE AND MAINTENANCE
To protect your furniture, we suggest the following:
• Avoid placing your furniture in direct sunlight.
• Do not place furniture directly under windows.
• Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp
material may scrape and
damage the finish.
• Do not place material with high temperature directly onto the surface of your furniture.
• Clean up spills quickly. Water left over a prolonged period of time may cause damage.
Alcohol, perfume, nail
polishes, aftershave and some medication may cause severe finish damage if not cleaned
immediately.
• Use a clean, soft, dry, lint free absorbent cloth to clean your furniture. Do not use any
detergent as they may
contain ingredients that may react and damage the finish.