Amart Furniture 64417 User manual

ASSEMBLY INSTRUCTION
ROSE BAY 6 DRAWER TALL CHEST
ITEM CODE 64417
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
164417
860mm
1057mm
400mm

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
64417

364417
6 pcs
NO. HARDWARE LIST QT'Y
AAdhesive felt pad
20x20x5
A(X6)
With two people carefully lay the Tall Chest on to a sheet or piece of cardboard.
Attach adhesive felt pad (A) onto the legs.
With two people carefully stand the Tall Chest upright.

WALL
STEP 1: Attach the handle
Take out handle from drawer, use
screwdriver removing the bolts. Attach handle in front of drawers,
on the drilling hole position by using
screwdriver to tighten bolts up.
Fixing the strap to the wall
As the wall materials vary,
screws for fixing to the wall
are not included.
For advice on suitable screws
systems, contact your local
specialised dealer.
464417

WALL
ASSEMBLY IS COMPLETE
564417

IMPORTANT: CARE GUIDE FOR YOUR TIMBER FURNITURE
Congratulations! You have just purchased a quality product from
Amart furniture. Please read on for important information
regarding your purchase…
A multi-step finish is applied to all our furniture, but all wood comes from nature.
Because of this, there will be natural variations in surface texture and grain like knots,
mineral streaks and sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make each piece of
furniture unique.
Our furniture is built to last. Following these step, basic care should protect your
investment for years to come.
Dust frequently with a clean damp lint-free cloth. This will help remove abrasive
build up which can damage a finish over time.
Do not place hot objects on any furniture surface. Always use suitable placemat.
Laminate and lacquer finishes on table tops provide added scartch and heat
resistance to our furniture, but they can still be damaged without proper care.
Avoid exposing your furniture to strong sunlight, heat, open windows or
dampness. Prolonged exposure to direct sunlight can fade the finish of your
furniture and sudden extreme temperature and humidity change can cause
cracking or splitting.
Do not expose your furniture to any liquids. Never allow water to sit on your
furniture. Alcohol, nail polish and perfume are also dangerous as they will
dissolve the lacquer finish on contact and may require proffesional repairs.
Do not allow plastic to come in direct contact with your furniture. Chemicals in
the plastic of placemats etc may soften and mark the finish in left in contact with
the furniture for period of time.