Amart Furniture KLAUS 73591 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
KLAUS 3 SEATER
ITEM CODE 73591
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
173591
101cm
Depth: 97cm
217cm

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
15
273591
2
WARNING
Do Not allow children to play on this mechanised furniture
or operate the mechanism. Leg rest folds down on closing
so that a child could possibly be injured. Always leave in an
upright and closed position. Keep hands and feet clear of
mechanism. Only the occupant should operate it.

Step1:
Locate package of power cord which is fixed on the mechanism
at the bottom of
the recliner.
Step2:
Keep back rest in an upright position then slide receivers into
steel mechanism posts at the seat of furniture,
and Press both sides of
the back firmly into place to ensure
it is fully locked.
373591
slide receiver
into post
Power Cord
1pcs
Mechanism post at
rear of seat
Receiver at bottom
of back rest
With 2 people,
carefully turn
lounge onto back of a
on piece of cardboard
or carpet to protect
covering
Power cord package

Step3:
Connect the cords on middle seat of 3-seater to connect power
for two speakers, wireless charger and reading light. Four cords come
from the rear of back rest and another four cords from the seat.
Step4:
Unravel the cord with the plug on the end of it and connect to a
wall socket
. This cord is also connects from the rear of back rest and
can
be plugged into a wall socket
. This is the to connect provides powers to
the
wireless charging station on the drop-down console.
473591
Each connection has a
different interface to make it
easy to identify.
the four
cord connections being
clearer
Plug the cord into a wall socket to operate
the wireless charging function.
to Cord of
charge station plugged into wall socket

Step5:
Now that the wireless charging cord has been plugged in, it’s
time to plug in the power cord. Plug the power card into the back panel
of arm.
Plug power cord into socket at back panel of arm.
573591
Cord of charge station
plugged into wall socket
SAFETY NOTE:
PLEASE ENSURE THAT ALL ELECTRICAL CORDS AND CABLES ARE CLEAR
OF THE FRAME AND MECHANISM. A FAILURE TO DO SO MAY SEVER
YOUR POWER CORD RESULTING IN SERIOUS INJURY OR DEATH.
Plug power cord into socket
at back panel of arm.

YES NO
673591

773591

Multifunctional Station Manual
Bluetooth
•
Bluetooth Name: Klaus
•
How to Connect:
1) Hold down the power button for 3 seconds.
2) When backlight of the button starts flashing, connect your device. Ensure your
device is within range.
3) Once successfully connected the backlight of power will stay lit.
Speaker Control Panel
•
How to use:
1) Hold the power button for 3 seconds to turn on/off.
2) Press the “replay” and “skip” buttons to navigate.
3) Press the “+ volume” and “-volume” buttons to control the sound.
Wireless Charge:
•
How to use:
1) Place the device in the center of wireless charging panel.
NOTE:
•
When the phone is paired and you receive a call or text, the sound will pause.
•
The speakers will only work through Bluetooth connection, not USB or Wireless
connection.
73591
Speaker
Speaker
Wireless
Charger
Wireless
Charger
240V Direct and USB Port
Speaker Instruction:
+ Volume
- Volume
Replay
Skip
Power/Play/Pause

Speaker Specifications
•
Reproduction system
•
Tweeter······················ φ78mm
•
Nominal impedance······················ 4Ω -4Ω
•
Sensitivity······················ 84±3dB
•
Frequency response······················ F0-12KHz
•
Nominal power······················ 20W
•
Maximum music power······················ 24W
•
Grille material······················ Steel net, ABS
•
Weight (per speaker including accessory parts) ······················ 640g
•
Gross weight (2 speakers including packaging) ······················ 1440g
73591
IMPORTANT INFORMATION
•DO NOT play the speakers for more than 6 hours continuously.
In doing so may cause damage to your speakers.
•DO NOT forget to turn off the reading lights after use. For
your safety, the reading lights will automatically turn off after
1 hour of use.

Reading Light Manual
73591
•How to use:
1) Open the reading light panel inside drop-down console.
2) Press each button to control the light at the same side of button.
•Note:
1) It’s not recommended that the reading light panel be closed before both the
lights are off. In doing so may cause damage to your lights.
2) The lights can be off automatically after one-hour.
Button
Control
Reading
Light Panel