Amart Furniture CABOS 72791 User manual

Imported by Amart Furniture Pty Ltd, Brisbane, Qld, Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
CABOS DINING CHAIR
ITEM CODE 72791
Imported by Amart Furniture Pty Ltd, Brisbane,Qld, Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture, Customer Service Free call 1800 351 084
1ITEM CODE 72791

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2.Take care when lifting. Product should be assembled as near as possible to
the point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 72791

3 ITEM CODE 72791
PARTS LIST
1 BACK FRAME
2 LEGS
3SEAT

ITEM CODE 72791
STEP1 Attach the Seat(3) to the Back frame (1) with Bolt(C),
washer(D) and Spring washer (G) using Allen Key(E).
4
STEP2 Secure the Seat(3) to the Back frame (1) with Bolt(A),
washer(D) and Spring washer (G) using Allen Key(E).

ITEM CODE 727915
STEP3 Attach the Legs(2) to the Seat (3) with Bolt(B), washer(D)
and Spring washer (G) using Allen Key(E).

Improperly fastened bolts.
•Have gaps in-between the washer, split washer, bolt head and the chair.
•Split washer is not compressed.
•Bolt can be easily unwound by hand.
Properly fastened bolts.
•No gaps between the washer, split washer, bolt head and the chair.
•Split washer is compressed into closed position.
•Bolt can not be loosened by hand.
Warning
Bolts that are not properly fastened could cause structural failure . Amart
recommends the bolts be re-tightened after first 7 days and checked on regular
basis.
6 ITEM CODE：72791
Important Information
Bolt Tightening Instructions

ITEM CODE 727917
STEP4: Put dust cover(F)over the seat(3)
ASSEMBLY IS COMPLETE

8ITEM CODE 72791
Care and maintenance
REGULAR CARE:
• Protect from direct sunlight
• Vacuum regularly using low suction
• Rotate reversible cushions regularly
CLEANING:
• Do not remove cushion covers for separate cleaning even though they may
have zippers
• Do not wash , Do not dry clean , Do not shampoo clean
• Clean with hot water extraction machine. Professional cleaning recommended
• Do not use dishwashing liquid or laundry detergent
• Use only upholstery detergents
• Do not wet filling
• Dry in shade away from direct heat and sunlight
• Allow to dry thoroughly before re-use
SPOT CLEANING:
• Do not rub
• Do not spot clean with any solvent
• Treat spills and stains as soon as possible
• Gently scrape off any soil or mop any liquid from the surface of the fabric
• Apply proprietary cleaning agents strictly according to instructions to remove
the residue of the spill
• Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments. Do not use
aerosol products
* PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT COVERED BY
WARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND TEAR AND
DOES NOT AFFECT THE DURABILITY OR FUNCTIONALITY OF THE
FABRIC AN D IS EASILY REMOVED
Do not:
· Use chair/stool as a ladder
· Climb on the chair/stool
· Stand on the foot-rest of the chair, as this could lead to the stool becoming
unbalanced and overturning