Amart Furniture AVA 66107 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
AVA QUEEN BED
ITEM CODE 66107
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture, Customer Service Free call 1800 351
084
1ITEM CODE 66107

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2.Take care when lifting. Product should be assembled as near as possible to
the point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 66107
ALLOW 45 MINITES 2 PEOPLE REQUIRED
TOOLS REQUIRED
12
11
10
9
8
765
4
3
2
1
We recommend using a
screwdriver to put this item
together. However if you choose
to use a power drill it must be
used on LOW SPEED (LOW
TORQUE) as too much pressure
could damage the product

3 ITEM CODE 66107
PARTS LIST
1 HEADBOARD
2 FOOTBOARD
3 SIDERAIL
4 CENTRE RAIL
5 SUPPORT LEGS
6SLATS (1538mm*88mm)
C. ALLEN KEY
B. BOLT 5/16''X60MM
A. BOLT 5/16''X32MM
8PCS
D. SCREW 4X30MM
E. FLAT WASHER
2PCS 1PCS 6PCS
8PCS
F. LOCK WASHER
8PCS

ITEM CODE 66107
•Attach side rail (3)to headboard (1) and footboard (2)
using flat washer (e), lock washer (f) and bolts (a).
•Tighten with Allen Key (c).
4
C. ALLEN KEY A. BOLT 5/16''X32MM
8PCS
E. FLAT WASHER
1PCS 8PCS
F. LOCK WASHER
8PCS
ITEMS REQUIRED
1

ITEM CODE 66107
•Attach support legs (5) to centre rail (4) with
•bolts (b)
•Tighten with allen key (c)
5
C. ALLEN KEY
1PCS
ITEMS REQUIRED
2B. BOLT 5/16''X60MM
2PCS
X2
C
B
4
5
5

6 ITEM CODE 66107
•Put centre rail (4) between head board (1) and foot
board (2) .
3

•Attach slats (6) tosiderail (3) using screws (d).
•Use Screwdriver or Power Drill on Low Speed.
7 ITEM CODE 66107
ITEMS REQUIRED
4D. SCREW 4X30MM
6PCS

8ITEM CODE 66107
ASSEMBLY IS COMPLETE
CAUTION
ALWAYS LIFT YOUR BED WHEN MOVING/RELOCATING –DO NOT DRAG.
DRAGGING CAN CAUSE THE CENTRE SUPPORT LEGS TO BEND/BREAK

9ITEM CODE 66107
Care and maintenance
REGULAR CARE:
• Protect from direct sunlight
• Vacuum regularly using low suction
• Rotate reversible cushions regularly
CLEANING:
• Do not remove cushion covers for separate cleaning even though they may have
zippers
• Do not wash , Do not dry clean , Do not shampoo clean
• Clean with hot water extraction machine. Professional cleaning recommended
• Do not use dishwashing liquid or laundry detergent
• Use only upholstery detergents
• Do not wet filling
• Dry in shade away from direct heat and sunlight
• Allow to dry thoroughly before re-use
SPOT CLEANING:
• Do not rub
• Do not spot clean with any solvent
• Treat spills and stains as soon as possible
• Gently scrape off any soil or mop any liquid from the surface of the fabric
• Apply proprietary cleaning agents strictly according to instructions to remove the
residue of the spill
• Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments. Do not use aerosol
products
* PILLING IS NOT A FABRIC DEFECT OR FAULTAND IS NOT COVERED BY
WARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEARAND TEAR AND
DOES NOT AFFECT THE DURABILITY OR FUNCTIONALITY OF THE FABRIC AND
IS EASILY REMOVED