Amart Furniture NARA 72814 User manual

Imported by Amart Furniture Pty Ltd, Brisbane , Qld Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
NARA TALL CHEST
ITEM CODE 72814
Imported by Amart Furniture Pty Ltd, Brisbane Qld, ,Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture , Customer Service Free call 1800 351 084
1ITEM CODE 72814

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2.Take care when lifting. Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 72814
Allow 20 min For 2 person Additional tools required
X2

3ITEM CODE 72814

4ITEM CODE 72814
PARTS LIST
1
TOP BOARD
2
SIDE BOARD
3
SIDE BOARD
4
BACK SUPPORT BAR
5
BOTTOM BOARD
6
FEET
7
FEET
8
BASE BAR
9
BASE BAR
10
DRAWER SURFACE BOARD
11
DRAWER SIDE BOARD
12
DRAWER SIDE BOARD
13
DRAWER BOTTOM BOARD
14
DRAWER BACK BOARD
15
DRAWER SUPPORT BOARD
16
CROSSING BAR
17
BACK BOARD

ITEM CODE 72814
5
STEP:1
O.
Insert the dowel(D) to side board (2)(3), back support bar(4)
and crossing bar(16)

ITEM CODE 72814
6
STEP:2
Fix runners (K) to side board (2) with screws(F).
Fix runners (M) to side board (3) with screws(F).
Note the position of fixing screw as shown in the figure.

ITEM CODE 72814
7
STEP:3
STEP:4
Fix cam pin (B) to side board (2)(3).
Attach crossing bar(16) to side board (2)(3)using cam locks(A)
Fix cam pin (B) to top board (1).
Attach back support bar(4) to top board(1) using cam locks(A)

ITEM CODE 72814
8
STEP:5
Attach top board(1) to existing unit with cam locks(A).
Attach bottom board (5) to existing unit with screws(G).

ITEM CODE 728149
STEP:7
STEP:6
Attach back board (17) to existing unit with screws(H).

ITEM CODE 72814
10
STEP:8
STEP:9
Insert the dowel(D) to base bar (8)(9)
Fix cam pin (C) to feet (6)(7).

ITEM CODE 72814
11
STEP:10
STEP:11
Fix base bar (8)(9) and feet (6)(7) with cam locks (A)
Attach base to existing unit with screws(G).

ITEM CODE 7281412
STEP:12
STEP:13
Attach drawer side board (11)(12)to drawer back board(14) with screw(E).
Attach drawer support bar(15) to drawer back board(14) with screw(E).
Insert drawer bottom board(13) to the body of drawer.
Fix cam pin (B) to drawer surface board(10).
Attach drawer surface board(10) to the body of drawer with cam locks(A)

ITEM CODE 72814
13
STEP:14
Fix runners (L)(N) to drawer body with screws(F).
Note the position of fixing screw as shown in the figure.

ITEM CODE 72814
14
STEP:15
Fix handles (I)to drawer surface board(10) with screw(J).
Assemble drawers into the body.

ITEM CODE 72814
15
ASSEMBLY IS COMPLETE

16 TEM ICODE 72814
SAFETY BRACKETS INSTRUCTIONS
1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach
the Mounting Plate into a stud. If mounting into brick or masonry you will need to
acquire wall anchors.
2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
3. Move the furniture to its final position. Thread a Wall Strap through the both
Mounting Plates and tighten until snug. Do not over tighten.
4. Make sure that the Mounting Plates are firmly attached to the wall and furniture
and that the Wall Strap is snug.
HARDWARE
Mounting Plate x 2 Wall Strap x 1 Large Screw x2 Small Screw x2

17
To protect your furniture, we suggest the following:
•Avoid placing your furniture in direct sunlight.
•Do not place furniture directly under windows.
•Do not place sharp materials (knife, fork, etc.) directly onto your
furniture as sharp material may scrape and damage the finish.
•Do not place material with high temperature directly onto the
surface of your furniture.
•Clean up spills quickly. Water left over a prolonged period of
time may cause damage. Alcohol, perfume, nail polishes,
aftershave and some medication may cause severe finish
damage if not cleaned immediately.
•Use a clean, soft, dry, lint free absorbent cloth to clean your
furniture. Do not use any detergent as they may contain
ingredients that may react and damage the finish.
TEM ICODE 72814
NOTE: If the above care advise is not adhered to your product
warranty may become void