Amart Furniture ARUBA 73970 User manual

Imported by Amart Furniture Pty Ltd, Brisbane, Qld,Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture , Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
ARUBA DINING TABLE
ITEM CODE 73970
Imported by Amart Furniture Pty Ltd, Brisbane Qld, Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture, Customer Service Free call 1800 351
084
1ITEM CODE 73970

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2.Take care when lifting. Product should be assembled as near as possible to
the point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 73970
ALLOW 20 MINITES 2 PEOPLE REQUIRED
12
11
10
9
8
765
4
3
2
1

C. ALLEN KEY
A. BOLT 5/16''X60MM
8PCS 1PCS
8PCS
B. FLAT WASHER
3 ITEM CODE 73970
PARTS LIST
1 TABLE TOP
2 TABLE LEG

ITEM CODE 73970
•Attach table leg (2)to table top (1) using flat washers (b)
and bolts (a).
•Tighten with Allen Key (c).
4
C. ALLEN KEY A. BOLT 5/16''X60MM
8PCS
B. FLAT WASHER
1PCS 8PCS
ITEMS REQUIRED
B
A
C

5ITEM CODE 73970
ASSEMBLY IS COMPLETE

6
CARE AND MAINTENANCE
•A multi-step finish is applied to all our furniture, but all wood comes
from nature. Because of this, there will be natural variations in surface
texture and grain like knots, mineral streaks and sap runs that may
affect the finish. These differences in character are not defects, but
distinctions that make each piece of furniture unique.
•Our furniture is built to last. Following these steps for basic care
should protect your investment for years to come.
•Dust frequently with a clean damp lint-free cloth. This will help
remove abrasive build up which can damage a finish over time.
•Do not place hot objects on any furniture surface. Always use a hot
plate or placemat. Laminate and lacquer finishes on table tops provide
added scratch and heat resistance to our furniture, but they can still
be damaged without proper care.
•Avoid exposing your furniture to strong sunlight, heat outlet, open
windows or dampness. Prolonged exposure to direct sunlightcan fade
the finish of your furniture, while extreme temperature and humidity
changes can cause cracking or splitting.
•Do not expose your furniture to any liquids. Never allow water to sit
on your furniture. Alcohol, nail polish and perfume are also dangerous
as they will dissolve the lacquer finish on contact and may require
professional repairs.
•Do not allow plastic to come in direct contact with your furniture.
Chemicals in the plastic of placemats etc may soften and mark the
finish if left in contact with the furniture for a period of time.
ITEM CODE 73970