Amart Furniture MAPLETON 72741 User manual

1
ASSEMBLY INSTRUCTION
MAPLETON 3 DRAWER BEDSIDE
ITEM CODE 72741
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
600mm
450mm
710mm
72741

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
72741

3
PARTS LIST
1MAPLETON 3 DRAWER
BEDSIDE 1 pc
NO. PARTS LIST QT'Y
STEP 1: With two people carefully lay the bedside on to a sheet or piece of cardboard.
Attach adhesive felt pad (A) onto the legs.
With two people carefully stand the bedside upright.
NO. HARDWARE LIST QT'Y
AAdhesive Felt Pad
Ø20x5mm 6 Pcs
1
A
(x6)
72741

4
STEP 2: Attach the handle
Fixing the strap to the wall
As the wall materials vary,
screws for fixing to the wall
are not included.
For advice on suitable screws
systems, contact your local
specialised dealer.
WALL
Remove handles from inside
drawers using a screwdriver to
undo the bolts.
Attach handles to drawer fronts by
connecting the handle to the bolt
through the pre-drilled hole and tighten
with a screwdriver
72741

5
ASSEMBLY IS COMPLETE
WALL
72741

suitable
and sudden