Amart Furniture NORMANDY 2000 69275 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
NORMANDY 2000 DINING TABLE
ITEM CODE 69275
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture , Customer Service Free call 1800 351
084
1ITEM CODE 69275

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2.Take care when lifting. Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 69275
ALLOW 20 MINITES 2 PEOPLE REQUIRED
TOOLS REQUIRED
12
11
10
9
8
765
4
3
2
1

3ITEM CODE 69275
PARTS LIST
1DINING TABLE TOP
2LEGS
3SUPPORT FRAME
4 CENTER STRETCHER
A. NUT M8 B. SPRING WASHER C. CRESCENT
WASHER D. BOLT M8X80MM
H. ALLEN KEY
G. WASHER
F. BOLT M8X50MM
E. SPANNER
AX2 BX2 DX2
CX2
EX1 FX20 GX20 HX1

ITEM CODE 69275
•Install the bolt(D) into the leg(2);
•Insert the other end of bolt(D) into the center
stretcher(4)
•Attach legs (2)and center stretcher(4) with crescent
washer (C) spring washer (B)and nut(A)
•Tighten with spanner (E)
4
ITEMS REQUIRED
1
AX2 BX2 CX2
EX1
DX2
A. NUT M8
E. SPANNER
B. SPRING WASHER C. CRESCENT
WASHER D. BOLT M8X80MM

ITEM CODE 69275
•Attach support frame(3)and center stretcher (4)with flat
washer (G) bolts (F)
•Tighten with allen key (H)
4
ITEMS REQUIRED
2H. ALLEN KEY
G. FLAT WASHER
F. BOLT M8X50MM
FX2 GX2 HX1

ITEM CODE 69275
•Attach legs (2)and support frame(3) to top (1) with flat
washer (G)bolts (F)
•Tighten with allen key (H)
6
ITEMS REQUIRED
3H. ALLEN KEY
G. FLAT WASHER
F. BOLT M8X50MM
FX18 GX18 HX1

7TEM ICODE 69275
ASSEMBLY IS COMPLETE

8TEM ICODE 69275
CARE AND MAINTENANCE
•A multi-step finish is applied to all our furniture, but all wood comes
from nature. Because of this, there will be natural variations in surface
texture and grain like knots, mineral streaks and sap runs that may
affect the finish. These differences in character are not defects, but
distinctions that make each piece of furniture unique.
•Our furniture is built to last. Following these steps for basic care
should protect your investment for years to come.
•Dust frequently with a clean damp lint-free cloth. This will help
remove abrasive build up which can damage a finish over time.
•Do not place hot objects on any furniture surface. Always use a hot
plate or placemat. Laminate and lacquer finishes on table tops provide
added scratch and heat resistance to our furniture, but they can still
be damaged without proper care.
•Avoid exposing your furniture to strong sunlight, heat outlet, open
windows or dampness. Prolonged exposure to direct sunlightcan fade
the finish of your furniture, while extreme temperature and humidity
changes can cause cracking or splitting.
•Do not expose your furniture to any liquids. Never allow water to sit
on your furniture. Alcohol, nail polish and perfume are also dangerous
as they will dissolve the lacquer finish on contact and may require
professional repairs.
•Do not allow plastic to come in direct contact with your furniture.
Chemicals in the plastic of placemats etc may soften and markthe
finish if left in contact with the furniture for a period of time.