Amart Furniture PERSIAN 38704 User manual

ASSEMBLY INSTRUCTION
PERSIAN SINGLE BED
ITEM CODE - 38704
Imported by Amart Furniture Pty Ltd,Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Freecall 1800 351 084.
Imported by Amart Furniture Pty Ltd,Qld, Brisbane Australia. For any assistance with
assembly or for missing parts please phone Amart Furniture, Customer Service
Freecall 1800 351 084.
1030mm
2040mm
970mm
1 38704
Furniture

PRE-ASSEMBLY PREPARATION
2 38704
BEFORE YOU START....
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
2. Check and ensure that you have all required contents for complete assembly.
3. Always read the assembly instructions carefully before beginning assembly.
4. The packaging and contents can be a choking hazard, therefore keep out of reach
of small children at all items.
5. Do not over tighten the bolts as this may damage the thread.
ALLOW 45 MINUTES 2 PEOPLE REQUIRED

PARTS LIST
3 38704
HEAD FRAME
FOOT FRAME
SIDE RAILS
1
2
3
4- 9mm x 60mm x 860mm
3
3
1
4
2
Single End Plastic Cap
A x 28pcs
M8 x 25mm
B x 8pcs
M8-Allen Key
C x 1pc
WOOD SLATS
1 pc
1 pc
2 pcs
14 pcs

1
3
3
2
ASSEMBLY COMPLETE
B
Insert both end of the wood slat to a single end plastic cap as
shown on the picture.
A
A4
B
STEP 3
STEP 1: Fix both side rails (3) to the head & foot bed frame with bolt (B) using Allen key (C).
STEP 2: Insert wooden slats (4) into both ends of the single end plastic cap (A).
Fix one of wood slat into the hole of side rail (3) by pressing it
accordingly to the defaults holes and the other end to the other side rail
holes. Press down on the caps gently to secure.
3
3
4 38704

5 38704
Product Care for Hi-Gloss Items
Hi-gloss lacquered furniture is more sensitive to marks and scratching then some other furniture
products. It is important to exercise caution and care to maximise the life and beauty of
this product.
Following the below simple guidelines when using your hi-gloss product will protect your
investment for years to come.
.Dust frequently with a clean damp lint-free cloth. This will help remove
abrasive build up which can damage a finish over time.
.Do not place hot objects on any furniture surface. Always use a hot plate or
placement. Laminate and lacquer finishes on table tops provide added scratch
and heat resistance to our furniture, but they can still be damaged without
proper care.
.Avoid exposing your furniture to strong sunlight, heat outlet, open windows or
dampness. Prolonged exposure to direct sunlight can fade the finish of your
furniture, while extreme temperature and humidity changes can cause
cracking or splitting.
.Do not expose your furniture to any liquids. Never allow water to sit on your
furniture. Alcohol, nail polish and perfume are also dangerous as they will
dissolve the lacquer finish on contact and may require professional repairs.
.Do not allow plastic to come in direct contact with your furniture. Chemicals in
the plastic of placements etc may soften and mark the finish if left in contact
with the furniture for a period of time.
.Avoid placing sharp or rough objects on the surface of your furniture. These
may scratch the surface of the product.
.When moving your furniture, do not drag it across the floor. This may damage
the product. Instead use two (2) people to lift carefully from either end.