Amart Furniture OSWALD 72056 User manual

ASSEMBLY INSTRUCTION
KRAMER Recliner
ITEM CODE 70467
Imported by Amart furniture Pty Ltd,Qld,Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart furniture ,Customer Service Free call 1800 351 084
1
Imported by Amart furniture Pty Ltd,Qld,Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart furniture ,Customer Service Free call 1800 351 084
Imported by Amart Furniture Pty Ltd,Qld,Brisbane
Australia.For any assistance with assembly or for missing
parts please phone Amart Furniture,Customer Service
Free Call 1800 351 084
ITEM CODE 72056
72056
ASSEMBLY INSTRUCTION
OSWALD 3 Seat 2RR

Before you start:
PRE-ASSEMBLY PREPARATION
Before you start:
2 PEOPLE REQUIRED
ALLOW 5 MINUTES
2
PRE-ASSEMBLY PREPARATION
1. Choose a clean,level,spacious assembly area.Avoid hard
surfaces that may damage the product
2. Take care when lifting.Product be assembled as near as
possible to the point of use
3. Ensure that you have all required contents for complete
assembly
4. Always read the assembly instructions carefully before
beginning assembly
5. Keep all hardware parts and packaging out of small children
6. Do not over tighten the screws and bolts as this may damage
the threads
WARNING
DO NOT ALLOW CHILDREN TO PLAY ON THIS
MECHANISED FURNITURE OR ORERATE THE
MECHANISM.CHILDREN SHOULD ALWAYS BE
SUPERVISED WHEN USING THIS FURNITURE.
PLEASE KEEP YOUR BODY CLEAR OF THE
MECHANISM AT ALL TIMES
72056

3
Seat
BackrestBackrestBackrest
72056

STEP 1 Slide backrest receivers into the steel mechanism posts on
the seat (A). Press the backrest evenly down on both sides
to lock the backrest into place.
STEP 1
4
STEP 2
Install
Disassembly
Slide backrest receivers into the steel mechanism posts on
the seat (A). Press the backrest evenly down on both sides
to lock the backrest into place.
To remove the backrest, use a screwdriver to carefully
lever the tab on the backrest sleeve outwards. This will
unlock the backrest and allow you to lift it off the
mechanism posts.
72056

572056

Fabric Care and
Maintenance
REGULAR CARE:
• Protect from direct sunlight
• Vacuum regularly using low suction
• Rotate reversible cushions regularly
CLEANING:
• Do not remove cushion covers for separate cleaning even though
they may have zippers
• Do not wash, Do not dry clean, Do not shampoo clean
• Clean with hot water extraction machine. Professional cleaning
recommended
• Do not use dishwashing liquid or laundry detergent
• Use only upholstery detergents
• Do not wet filling
• Dry in shade away from direct heat and sunlight
• Allow to dry thoroughly before re-use
SPOT CLEANING:
• Do not rub
• Do not spot clean with any solvent
• Treat spills and stains as soon as possible
• Gently scrape off any soil or mop any liquid from the surface of the
fabric
• Apply proprietary cleaning agents strictly according to instructions to
remove the residue of the spill
• Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments. Do not
use aerosol products
* PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT
COVERED BY WARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND
TEAR AND DOES NOT AFFECT THE DURABILITY OR
FUNCTIONALITY OF THE FABRIC AND IS EASILY REMOVED
672056