Amart Furniture SIGNATURE LA SALLE 63807 User manual

ASSEMBLY INSTRUCTION
LA SALLE TALL CHEST
ITEM CODE 63807
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
63807

1
IMPORTANT: CARE GUIDE FOR YOUR
TIMBER FURNITURE
63807
•Congratulations! You have just purchased a quality product from Amart
Furniture. Please read on for important information regarding your
purchase.
•A multi-step finish is applied to all our furniture, but all wood comes from
nature. Because of this, there will be natural variations in surface texture
and grain like knots, mineral streaks and sap runs that may affect the
finish.
•These differences in character are not defects, but distinctions that make
each piece of furniture unique.
•Our furniture is built to last. Following these steps for basic care should
protect your investment for years to come.
•Dust frequently with a clean damp lint-free cloth. This will help remove
abrasive build up which can damage a finish over time.
•Do not place hot objects on any furniture surface. Always use a coaster or
placemat. Laminate and lacquer finishes on table tops provide added
scratch and heat resistance to our furniture, but they can still be damaged
without proper care.
•Avoid exposing your furniture to strong sunlight, heat outlets, open
windows or dampness. Prolonged exposure to direct sunlight can fade the
finish of your furniture, while extreme temperature and humidity changes
can cause cracking or splitting.
•Do not expose your furniture to any liquids. Never allow water to sit on
your furniture. Alcohol, nail polish and perfume are also dangerous as they
will dissolve the lacquer finish on contact and may require professional
repairs.
•Do not allow plastic to come in direct contact with your furniture.
Chemicals in the plastic of placemats etc may soften and mark the finish if
left in contact with the furniture for a period of time.

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces
that may damage the product
2. Take care when lifting. Product should be assembled as near as
possible to the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning
assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the
threads
263807

Removing the handles
Handles are installed on the inside for their own protection
during transport. You will need to unscrew them and reattach
them before use.
Step 1
Start by opening drawer with the string attached. Take a
Phillips head screw driver and turn the screws counter
clockwise. Take and store the screw safely once it is loose. As
per the diagram on the left
Step 2
Re-insert the screw from the inside. Hand turn the handle on
the screw until it is secure, then tighten with a Phillips head
screw driver until firmly fixed, as per the diagram on the
right.
363807

Attaching the anti-tipping kit.
As wall types vary, we do not supply the screws that you will
need, to fasten onto your wall. Please seek advice from you
trusted local specialist.
Step 1
Mark the spot on the wall that will best line up with the
anchors already fixed on the unit. For best results we
recommend placing the wall anchor to one side and not
directly inline with the unit anchor.
Step 2
After sourcing the correct screw system for your wall type,
fasten the wall side of the anchor.
Step 3
Move the unit into position and lock the uni anchor to the wall
anchor together with the cable tie supplied. Do for each
anchor point on the unit.
463807

5
Assembly is complete
63807