Amart Furniture MADDEN J1888 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
MADDEN CORNER LOUNGE
J1888
ITEM CODE: 70012
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
1-6 U6393G
70012

2-6 U6393G
70012
Before you start:
1.Choose a clean,level,spacious assembly area.Avoid hard
surfaces that may damage the product
2.Take care when lifting.Product should be assembled as near as
possible to the point of use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning
assembly.
5.Keep all hardware parts and packaging out of reach of small
children.
6.Do not over tighten the screws and bolts as this may damage the
Threads.
PRE-ASSEMBLY PREPARATION

3-6 U6393G 70012
You may need a screwdriver to remove back of recliner
ASSEMBLY INSTRUCTIONS
STEP 1: Attach Backrest ①②③to the base of ④by
placing bracket B into sleeve A and press down firmly to
lock retailing clip into place. Listen for the clip to pop into
place securely.
Repeat this step with backrest ⑤⑥to the base of ⑦and
Backrest ⑧ ⑨ to the base of ⑩as shown in the picture
below.
A
A
B
B

STEP 2: Attach the middle wedge to both LHF and RHF sides
by connecting the clips which are already attached to the
pieces.
STEP 2: Assembly complete.
4-6 U6393G 70012
ASSEMBLY INSTRUCTIONS

5

6-6 U6393G70012