Amart Furniture TORELLI 48830 User manual

Item Code: 48830
500mm
1100mm
450mm
TORELLI CORNER TV STAND
ITEM CODE - 48830
ASSEMBLY INSTRUCTION
Imported by Amart Furniture Pty Ltd,Qld, Brisbane Australia
For any assistance with assembly or or missing parts, please phone
Amart Furniture, Customer Service Freecall 1800 351 084.
1-8
Imported by Amart Furniture Pty Ltd,Qld, Brisbane Australia
For any assistance with assembly or or missing parts, please phone
Amart Furniture, Customer Service Freecall 1800 351 084.

1100mm 450mm
12
6
3
9
Approximate Assembly
Time:20mins 2 persons needed
BEF RE Y U START
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
2. Take care when lifting. Product should be assembled as near as possible to the point of use.
3. Ensure that you have all required contents for complete assembly.
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the the threads.
PRE-ASSEMBLY PREPARATI N
Item Code: 488302-8

Item Code: 48830
EXPL DED EXAMPLE
3-8
F1
F2
F3
F4
F4
F4
F4
F5 F5
F6
F7
F6
F7 F6
F7 F6
F7

CHECKLIST
Rods 485mm x 4
Washer x 6
Rods 210mm x 2
Spacer x 2 Plastic Washer x 2
A B C
D E F
GH
Plate x 8
Hex Nut x 6 Nut Tighte er x 1
PART NUMBER QTY DIMENSI N
F7
F1
F6
F5
F4
F3
F2
1
1
1
4
4
2
4
1100mm x 450mm x 5mm
500mm x 300mm x 5mm
1100mm x 450mm x 5mm
50mm x 420mm
50mm x 55mm
19mm x 190mm
Chrome Feet
4-8
Item Code: 48830

Item Code: 48830
A
B
C
D
1
2
REQUIRED F R STEP 1
F1
Rods 485mm x 4 Rods 210mm x 2
A B
REQUIRED F R STEP 2
Spacer x 2
Plate x 4
C D
F4 F4
F4
F4
F6 F6
5-8
Attach the Rods to the aluminium plate on glass as shown.
Insert the Tube over the Rods and follow by the hardware stated.

Item Code: 48830
6-8
F
E
G
E
G
C
3
4
REQUIRED F R STEP 3
REQUIRED F R STEP 4
Plate x 4
C
Washer x 2 Plastic Washer x 2
E
Hex Nut x 2
FG
F2
Washer x 4
E
Hex Nut x 4
G H
Nut Tighte er x 1
F5
F7
Tighten all nuts, being careful not to over tighten. Now you can turn
the assembled product upside down.
F3
Place the glass over the tube and followed by the hardware
stated.
Place the glass over the tube and followed by the hardware
stated.

If the glass is chipped or broken, stop using the product and consult the place of
purchase.
Do not drop, drag or strike glass.
Do not sit or stand upon the glass surfaces.
Do not place very hot or cold items on the glass unless adequately thick table mats are
used to prevent such items coming in contact with the glass. Do not place heavy objects
on glass.
Avoid scratching the glass or using as a chopping surface.
Do not strike the glass with hard or pointed items.
When cleaning the glass panels, use a damp cloth with washing up liquid or soft soap
if necessary.
Do not use washing powders or any other substances containing abrasives that may
potentially scratch the glass.
CARE AND MAINTENANCE
Item Code: 48830
7-8
ASSEMBLY IS C MPLETE

WARNING
Serious or fatal injuries may occur from furniture toppling over.
To help avoid this please follow the below recommendations:
Install the provided "Tipping Kit" as per the instructions
Never allow children to climb on or hang o o any part o this
product
Unless speci ically designed to accommodate, do not set TVs or
other heavy objects on top o this product
Note:The use of the provided "Tipping Kit" may reduce but not
necessarily eliminate the risk of furniture toppling over.
Please use this product with caution.
This is a permanent label Do not attempt to remove!
!
SAFETY BRACKETS
INSTRUCTI NS !
1. Attach the plastic brackets to the wall where the assembled product going to be placed
with the screws provided.
2. Move the furniture into its final position, thread a strap through the bracket and furniture
as shown in diagram. Tighten strap until snug, Do N T over tighten.
3. Make sure the brackets is firmly attached to the wall and the strap is snug enough.
Item Code: 48830
8-8