Amart Furniture SUMMIT 51814 User manual

ASSEMBLY INSTRUCTION
SUMMIT DINING CHAIR
ITEM CODE 51814
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone Amart
Furniture Ewing Road, Customer Service Free call 1800 351 084
450MM
955MM
600MM
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone Amart
Furniture Ewing Road, Customer Service Free call 1800 351 084
PAGE 1 OF 4 51814

PRE-ASSEMBLY PREPARATION
BEFORE YOU START…
1. CHOOSE A CLEAN, LEVEL, SPACIOUS ASSEMBLY AREA. AVOID HARD SURFACES THAT MAY
DAMAGE THE PRODUCT.
2. CHECK AND ENSURE THAT YOU HAVE ALL THE REQUIRED CONTENTS FOR COMPLETE
ASSEMBLY.
3. ALWAYS READ THE ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE BEGINNING ASSEMBLY.
4. THE PACKAGING AND CONTENTS CAN BE CHOCKING HAZARDS, THEREFORE KEEP OUT OF
REACH OF SMALL CHIDREN AT ALL TIMES.
IMPORTANT NOTE – BEFORE FINALLY TIGHTENING THE BOLTS, PLACE THE ASSEMBLED CHAIR
UPRIGHT ON A LEVEL SURFACE AND SIT CAREFULLY ON THE CHAIR TO ENSURE THE CHAIR LEGS
ARE ALIGNED AND LEVEL. THEN TIGHTEN ALL BOLTS AND YOUR CHAIR IS READY FOR USE.
PAGE 2 OF 4 51814
②①
③

PAGE 3 OF 4 51814
STEP 1
ALIGN BOTH OF THE BACK
RAILS AND ATTACH SEAT
FRAME TO THE BACKREAST
WITH E, D, B AS SHOWN IN
THE DIAGRAM
STEP 2
ATTACH THE
SEAT FRAME TO
BACK LEG WITH
E, D, A
STEP 3
CAUTION
INSERT LEGS
INTO THE HOLES
AT THE FRONT
OF SEAT
STEP 4
ATTACH THE FRONT
LEG USING E, D, C
HARDWARE
LIST

COMPLETED ASSEMBLY
IMPORTANT NOTE – BEFORE FINALLY TIGHTENING THE BOLTS, PLACE THE ASSEMBLED CHAIR UPRIGHT
ON A LEVEL SURFACE AND SIT CAREFULLY ON THE CHAIR TO ENSURE THE CHAIR LEGS ARE ALIGNED AND
LEVEL. THEN TIGHTEN ALL BOLTS AND YOUR CHAIR IS READY FOR USE.
PAGE 4 OF 4 51814