Amart Furniture ZUMA 51762 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Ewing Road, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
ZUMA DINING CHAIR – NEW MODEL
ITEM CODE 51762
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Ewing Road, Customer Service Free call 1800 351 084
PAGE 1 OF 4 51762
1050MM
435MM
645MM

PRE-ASSEMBLY PREPARATION
PAGE 2 OF 4 51762
BEFORE YOU START…
1. CHOOSE A CLEAN, LEVEL, SPACIOUS ASSEMBLY AREA. AVOID HARD SURFACES THAT MAY
DAMAGE THE PRODUCT.
2. CHECK AND ENSURE THAT YOU HAVE ALL THE REQUIRED CONTENTS FOR COMPLETE
ASSEMBLY.
3. ALWAYS READ THE ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE BEGINNING ASSEMBLY.
4. THE PACKAGING AND CONTENTS CAN BE CHOCKING HAZARDS, THEREFORE KEEP OUT OF
REACH OF SMALL CHIDREN AT ALL TIMES.
IMPORTANT NOTE – BEFORE FINALLY TIGHTENING THE BOLTS, PLACE THE ASSEMBLED CHAIR
UPRIGHT ON A LEVEL SURFACE AND SIT CAREFULLY ON THE CHAIR TO ENSURE THE CHAIR
LEGS ARE ALIGNED AND LEVEL. THEN TIGHTEN ALL BOLTS AND YOUR CHAIR IS READY FOR
USE.

PAGE 3 OF 4 51762

PAGE 4 OF 4 51762
IMPORTANT NOTE – BEFORE FINALLY TIGHTENING THE BOLTS, PLACE THE
ASSEMBLED CHAIR UPRIGHT ON A LEVEL SURFACE AND SIT CAREFULLY ON
THE CHAIR TO ENSURE THE CHAIR LEGS ARE ALIGNED AND LEVEL. THEN
TIGHTEN ALL BOLTS AND YOUR CHAIR IS READY FOR USE.