Amart Furniture CAPTAIN JACK 55215 User manual

ASSEMBLY INSTRUCTION
CAPTAIN JACK 4 DRAWER TALL CHEST
ITEM CODE : 55215
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Ewing Road, Customer Service Free call 1800 351 084
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture Ewing Road, Customer Service Free call 1800 351 084
PAGE 1 OF 4 55215
420mm
800mm
945mm

ALLOW 10 MINUTES 1 PERSON REQUIRED
ADDITIONAL TOOLS REQUIRED
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
3. Ensure that you have all required contents for complete assembly.
5. Keep all hardware parts and packaging out of reach of small children.
PAGE 2 OF 4 55215
x1
Serious or fatal injuries may occur from furniture toppling over.
To help avoid this please follow the below recommendations:
● Install the provided “Tipping Kit” as per the instructions
● Never allow children to climb on or hang off of any part
of this product
● Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product
If this product has drawers:
● Place the heaviest items in lowest drawers
● Do not open more than 1 drawer at a time as this may
cause the product to become unbalanced
● Do not tamper with or remove any drawer
interlocking/running system
Note:
The use of the provided “Tipping Kit” may reduce but not necessarily eliminate the risk of furniture
toppling over. Please use this product with caution.
This is a permanent label. Do not attempt to remove!
!WARNING

PAGE 3 OF 4 55215
hole.
2. Locate the other bracket on the wall 50mm below the bracket on the unit. Care should be taken to
ensure that this is securely fastened to the wall. The best method of fixing will depend upon the
required will vary depending upon your wall.
5. Confirm that the strap is securely laced and locked.
ANTI TIPPING KIT INSTALLATION INSTRUCTION
Anti Tipping Kit ( 1 Pack ) :

IMPORTANT : CARE GUIDE FOR YOUR TIMBER FURNITURE
furniture unique.
Our furniture is build to last. Following these steps for basic care should protect your investment for
years to come.
Dust frequently with a clean damp lint-free cloth. This will help remove abrasive build up which can
Do not place hot objects on any furniture surface. Always use hot plate or placement. Laminate and
lacquer finishes on table tops provide added scratch and heat resistance to our furniture, but they can
Avoid exposing your furniture to strong sunlight, heat outlet, open windows or dampness. Prolonged
exposure to direct sunlight can fade the finish of your furniture, while extreme temperature and humid-
Do not expose your furniture to any liquids. Never allow water to sit on your furniture. Alcohol, nail
polish and perfume are also dangerous as they will dissolve the lacquer finish on contact and may
require professional repairs.
•
•
•
•
•
•
•
PAGE 4 OF 4 55215