Amart Furniture 67947 User manual

ASSEMBLY INSTRUCTION
HADLEY OFFICE DESK
ITEM CODE: 67947
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
167947
600mm
1400mm
770mm
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084

2
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
67947

3
PARTS LIST
NO. PARTS LIST QT'Y
Legs 4 pcs Bolt M8x60mm 8 pcs
NO. HARDWARE LIST QT'Y
A
B
D
Flat washer M8xØ19 8 pcs
CSpring washer M8 8 pcs
Allen Key 4mm 1 pc
2
2
2
2
1
67947
EAdhesive Felt Pad
20x20x5mm 4 pcs
1Top 1 pc
2

4
Wall
DACB
(X8) (X8)
Fixing the strap to the wall
As the wall materials vary,
screws for fixing to the wall
are not included.
For advice on suitable screws
systems, contact your local
specialised dealer.
(X8)
67947
1
2
2
2
2
E(X4)
STEP 1: With two people carefully lay the Desk onto a sheet or piece of cardboard.
Attach Legs (2) onto Top (1) using the bolts (A), the flat washers (B) and the spring washers
(C), tighten it up by using an allen key (D)
Attach adhesive felt pad (E) onto the legs.
With two people carefully stand the Desk upright.

5
Wall
ASSEMBLY IS COMPLETE
67947

suitable
and sudden