Amazon B07Q1DJKBQ User manual

DISCLAIMER / 免责声明
DO NOT PRINT THIS PAGE!
不要打印此页面！
Service type What is included? What is NOT included? Performed
Service
New Manual
Writing
• New manual development
• Research about norms and legal standards applicable to
this product
• Inclusion of regulations listed in technical protocol
provided by lab.
• Project Management and Communication with Vendors
• Technical Drawing creation
• Color marking of mandatory safety instructions and
common market practice
• Translation to required additional languages and
multilingual desktop publishing
Rebranding
• Vendor manual Impala QC check
• Professional proofreading of the English vendor manual
• Typesetting into Amazon standard layout
• Technical Drawing creation
• Translation to required additional languages and
multilingual desktop publishing
• Review / Compliance check of safety
instructions provided by vendor
• Review / verification of operational parts
Vendor Paper size Market Manual type
Color codes
Safety instructions marked in BLUE
• Mandatory safety instructions taken from the applicable
standard / norm.
• Content is based on the safety standard.
• Text can be modified only in selected cases.
Safety instructions marked in ORANGE • Common market practice safety instructions. Not mandatory but
suggested.
• NOTE: Some safety instructions may apply to selected jurisdictions (United States, Canada, United Kingdom, European Union) only.
• NOTE: These color codes are intended to ease the validation process for Amazon and the lab. The color notes will be deleted prior to publication of the
document.
Luxshare Precision Limited
Other
Global
Normal UM

IC ID:24654-LACA092
B07Q1DJKBQ, B07Q2RH7W9
10W Qi Certified Fast Wireless Charging Stand
Product Name FR
Product Name DE
Product Name IT
Product Name ES
Product Name JP
FCC ID: 2APXNLACA092

English ..................................... 3
Français .................................XX
Deutsch..................................XX
Italiano ...................................XX
Español ..................................XX
日本語 .................................... XX

3
Welcome Guide •English
Contents:
Before getting started, ensure the package contains the following
components:
BA
USB Micro B socket
Indicator light
AUSB Micro B cable BCharging stand

4
IMPORTANT SAFEGUARDS
Read these instructions carefully and retain them for future use. If
this product is passed to a third party, then these instructions must
be included.
When using electrical appliances, basic safety precautions should always
be followed to reduce the risk of fire, electric shock, and/or injury to persons
including the following:
• Do not place foreign items, such as metal objects (including metal cases)
magnets, and magnetic cards, between the mobile device and the wireless
charger. The mobile device may not charge properly or may get damaged
due to overheating.
• When connecting the product to an external charger (not provided), only
use approved QC 2.0 / 3.0 charger (5 V 2 A or 9 V 1.67 A).
• Keep the product out of reach of children.
• Remove the mobile device from the wireless charger when it is fully
charged.
• The product shall not be exposed to dripping or splashing water.

5
Intended Use
• This product is intended for wireless charging of mobile devices that
are Qi certified by WPC (Wireless Power Consortium).
• This product is intended for household use only. It is not intended for
commercial use. This product is intended to be used in dry indoor areas
only.
• No liability will be accepted for damages resulting from improper use or
non-compliance with these instructions.
Before First Use
• Check for transport damages.
DANGER Risk of suffocation! Keep any packaging materials away
from children – these materials are a potential source of
danger, e. g. suffocation.
Operation
• Connect the product to a suitable power supply (USB 3.0 port or QC 2.0 /
3.0 charger) using the provided USB Micro B cable (A).
• Place the mobile device upright on the product.
• The indicator light is:
–yellow in standby mode, once connected.
–blue during the charging process.
–flashing blue if a non-compatible device or misaligned device has been
detected.

6
NOTICE Wireless charging may not work properly if the mobile
device is inside a case thicker than 5 mm. Remove such
case before charging.
NOTICE Fast charge is only available while using QC 2.0 / 3.0
charger (not provided).
Cleaning
NOTICE Unplug the product before cleaning.
NOTICE Do not immerse the electrical parts of the product in water
or other liquids. Never hold the product under running
water.

7
• To clean, wipe with a soft, slightly moist cloth.
• Dry the product after cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or
sharp utensils to clean the product.
responsible for compliance could void the user's authority to operate the equipment.
FCC Statement: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipement into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC statement: This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
LEGAL NOTICES
Canada IC Notice
• This Class B digital apparatus complies with Canadian CAN ICES-3(B) /
NMB-3(B) standard.

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
RSS-Gen & RSS-216 statement: This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 Statement: This equipment complies with Industry Canada radiation
exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada
limites établies pour un environnement non contrôlé.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device. This equipment complies with Industry
Canada radiation exposure limits set forth for an uncontrolled environment.
French version Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada
limites établies pour un environnement non contrôlé.

07Q1DJKBQ, B07Q2RH7W9
9
Simplified EU Declaration of
Conformity
• Hereby, Amazon EU Sarl declares that the radio equipment type
[B ] is in compliance with Directive 2014/53/EU.
• The full text of the EU declaration of conformity is available at the following
internet address:
https://www.amazon.co.uk/amazon_private_brand_EU_compliance
Disposal
The Waste Electrical and Electronic Equipment (WEEE) Directive
aims to minimize the impact of electrical and electronic goods
on the environment, by increasing re-use and recycling and by
reducing the amount of WEEE going to landfill. The symbol on
this product or its packaging signifies that this product must be
disposed separately from ordinary household wastes at its end of
life. Be aware that this is your responsibility to dispose of electronic
equipment at recycling centers in order to conserve natural
resources. Each country should have its collection centers for
electrical and electronic equipment recycling. For information about
your recycling drop off area, please contact your related electrical
and electronic equipment waste management authority, your local
city office, or your house hold waste disposal service.