Amazon B07K8XX4GJ Operator's manual

PART 1: Assembly of your rollaway-bed:
PART 2: Unfolding of your rollaway-bed for use:
Step 1: Unbox the rollaway Bed & Invert the Bed
in Upside down position.
Step 2: Fix the Castors as shown in Image & then get the Bed in
Upright position with Castors on the ground.
Step 1: Place the bed at your suitable location in your room.
Step 2: Lock all the four Castors with the Push down button
as shown in the image.
Step 3: Unbuckle the clips.
Step 4: Pull down side-A of your bed.
PUSH THE CLIP
DOWN TO LOCK

PART 3: Unfolding of your roll-away bed.
Note: you can demarcate any side of your bed as “A” or “B”.
The demarcation as provided in this assembly manual is only
for your reference and for enhancing your understanding of
the assembly instructions.
Step 5: Pull down side-B of the bed and your bed is ready for use.
Caution! emember to use the available red clip on side A & B of your bed while folding the bed.
The red button is available as shown in the Image on both the sides.

Step 1: Pull up side-A by gently pushing the available red-clip using your thumb
and pull the side of the bed to an upright position to that of the ground.
Step 2: Now pull up side-B by gently pushing the red-clip using your thumb as
you did for side-A of the bed.
Step 3: Lock side-A & side-B using buckle-clips & unlock the Castors to move
your bed to your preferred storage location.
Gently Push the
clip using your
thumb while
unfolding.
PULL THE CLIP UP
TO UNLOCK CASTORS